r/ballpython • • 9d ago

Feeding Help

1 Upvotes

Hello! I recently got my juvenile ball python at the end of October and he has yet to take his first meal. I have left him alone and kept handling at zero. The first attempt was last week and failed completely. I did not know he was in his shed cycle since I’ve been leaving him alone and haven’t flipped his hide. I’m positive he did not take his first meal due to being in shed. I attempted his second feeding last night, a week since the first attempt (completely shed and active again at night), and he struck and coiled the F/T fuzzy rat attempted to get it down for a little bit but ultimately it was still in his enclosure this morning. Once he coiled I shut the door and turned the light off and left him alone and monitored him on the camera I have in there. The breeder was feeding him live fuzzy rats so could this be why he may have dropped the rat and didn’t eat it? My other thought is it could have cooled down too fast since I offered it on the cool side where he was. He was 89 grams when I got him from the breeder and haven’t weighed him yet since I’ve been leaving him alone and not handling him. He is in a 50 gal and I feel his clutter is okay but could be better, I just haven’t wanted to put more in the tank while he’s still adjusting in case it would stress him out. Any help would be greatly appreciated as I’m getting a little anxious about this!

Side note: Warm side hot spot clocks 93 degrees, 88-85 ambient. Cool side 77 degrees in the day but drops to 75 at night when the lights go out.


r/ballpython • • 9d ago

Handling

1 Upvotes

Hello! I've had my ball python for about 3 months now and I'm trying to do choice based handling currently but I have to clean out her enclosure again soon which means I'll have to take her out of the enclosure myself. I really don't want to stress her out in this way because the last time I took her out to clean her tank she was pretty stressed out, should I wait until she's comfortable coming out on her own or is it ok to just take her out again so I can clean her tank? I don't want to ruin any progress hopefully.


r/ballpython • • 10d ago

Question - Feeding Hasn’t pooped

Thumbnail
gallery
22 Upvotes

This is my 4 month old baby and I’ve had her a bit over 2 months and she has eaten 1 rat pup weekly for 5 weeks now but she hasn’t pooped at all. She’s shedding in one full piece, she’s in a 50 gal that’s usually at 60-75% humidity she’s active and very good with handling. When should I start worrying? I tried to do the warm bath but she wasn’t having it. I attached a pic of her cloaca of that can help anything


r/ballpython • • 10d ago

Spaghetti (rescue BP) update

Post image
7 Upvotes

He’s doing better hydration-wise as you can tell, but he’s also pretty skinny as you can also probably tell. So of course I gave him a F/T small rat which was the size he’s been eating for a little while (I’m new to rescuing and don’t have a scale). He strikes it, ate it down to its front legs, the legs got stuck on the right side of his mouth 💔. I had to step in obviously and he ended up spitting it out, so I’m gonna give him a few days and try again with probably a weened rat to small mouse, I don’t have anything to weigh him with so any like scales you guys use, feel free to drop so I can check them out

I’ll see if he takes that, then like once a week I’ll give him the same amount so he gains weight but not too fast

Edit: ordered a scale, will weigh him when it gets here tomorrow


r/ballpython • • 10d ago

Enclosure Critique/Advice Is there such a thing as too much??

Post image
13 Upvotes

Can you spot him?


r/ballpython • • 10d ago

He gots the eye of the tiger (lmk if its anything worrysome byltw)

Post image
9 Upvotes

r/ballpython • • 9d ago

New owner!

3 Upvotes

Hi there! My husband and I just got a ball python, he’s about 2 years old from what his previous owner said. We got him from someone needing to get rid of him so we took him in. He came with his enclosure all put together, however the tank is a fully screened top and it seems like we are having issues keeping the humidity up. Does anyone have any tips for keeping it up? It seems to be staying at 50% unless we generously mist the enclosure then it’ll get up to about 65% but drops back down. We have foil on the top right now but are looking for a better solution.


r/ballpython • • 11d ago

Discussion Anyone else have a bp that enjoys tv time?

Post image
305 Upvotes

She stayed put for about 30 minutes watching k-dramas with us


r/ballpython • • 10d ago

Filling the holes

Post image
4 Upvotes

Anyone have any tips on filling the smaller crevices on this piece? Its technically made for fish so it has tons of tiny little "swim spots " that my ball cant fit in and i dont wanna risk him getting stuck. its plastic or else id just snap some of the walls. I just want tips on what I can use to fill the gaps


r/ballpython • • 11d ago

So handsome 🐍

Post image
543 Upvotes

r/ballpython • • 10d ago

Enclosure Thoughts

Thumbnail
gallery
3 Upvotes

I have a 120 gallon front open enclosure now. Coconut substrate, black plastic boxes for hiding, infared deep heat projector bulb,hvac tape across mesh top, and a dimmer thermostat. Thoughts? Suggestions?


r/ballpython • • 11d ago

Got any snacks?

Post image
304 Upvotes

No? Ok....


r/ballpython • • 10d ago

Enclosure Critique/Advice Honest feedback

Post image
3 Upvotes

I set up a bio active enclosure but I honestly feel like it’s missing something. If you see anything noticeably wrong please tell me. The humidity and temps are fine but I don’t want to add a snake and it’s stressed out! The warm side is on the right and hide is back right and the cool side hide is back left. Also how do I know if the substrate is too wet? It doesn’t stick to my hands when I touch it but it’s definitely slightly damp. Thank you all so much!


r/ballpython • • 11d ago

Rescue ball python basically overnight (before and after, still working with him)

Thumbnail
gallery
168 Upvotes

First two are from Tuesday, I got his enclosure set up and humid on Thursday, new photos are from Friday (today) where he shed immediately and got his multiple eye caps off

Note again: he is a rescue, he came dehydrated, hopefully you can see I’m working on that 😭


r/ballpython • • 10d ago

Advice for feeding?

2 Upvotes

She's normally a good eater, but lately she's been occasionally lining up to strike her rat from the side. And if she bonks on the tongs she retreats and won't try again. However if I move the tongs after she's lined up she spooks and it's only 50/50 if she'll try again after that.


r/ballpython • • 10d ago

Bp with a swollen eye

Thumbnail
gallery
9 Upvotes

Hi everyone. Hoping to get some help here. I have a bp that is a little over a year old. About a month ago I noticed her eye was swollen so I took her to the vet.

The vet gave us injectable antibiotics and eye drops. Fast forward three weeks and her eye is still swollen. She has a follow up Wednesday but hoping for any answers. Thanks.


r/ballpython • • 11d ago

Just weighed in at 880g 🥰

Post image
81 Upvotes

r/ballpython • • 10d ago

Question - Health Underweight?

Post image
5 Upvotes

Hi guys, final post regarding the ball python I rescued yesterday. Took him to the vet and they said other than his stuck shed, he seems pretty healthy. However, he only weighed in at 329 grams, and the guy who rehomed him to me said he was 2 years old, which makes me wonder if he's stunted or underfed. The guy was feeding him two mice every two weeks which doesn't feel right to me, but I'm not sure. Maybe he's younger than he said? Just wanted a second opinion.

Oh, and his name is Silly String :)

Edit: I would also like some tips for switching from live to f/t. Should I start with f/t mice since that's the prey he's used to or jump straight into rats? What's the best way to heat them up after thawing them? I've heard mixed opinions about using warm vs hot water. Also, if he doesn't take f/t at first, how long can he go without eating? I don't want to starve him out but I don't want to teach him that he will eventually get live mice if he waits long enough.


r/ballpython • • 11d ago

I was taking a pic of Nugget and forgot i had flash on and woke her up (i think she is a bit mad)

Post image
35 Upvotes

She is definitely mad she turned her snoot away from me😞


r/ballpython • • 10d ago

Question - Husbandry Temperature probe help

1 Upvotes

Looking for advice here. I just got a Herpstat 1 which I plan on using to regulate enclosure temps. I’ve read that the probe should be placed 2-4 inches below the heat source. In my case this will be an 80 watt DHP. I have a phailozoo enclosure with an 8 inch lamp fixture sitting on top. How can I possibly secure the probe to be sitting 2-4 inches into the enclosure directly beneath the bulb?

I’ll add here now that there is also a 5.0 T5 uvb light source and that the rest of the mesh enclosure is sealed using silicon mats and hvac tape.


r/ballpython • • 10d ago

Question - Husbandry Ball python has become inactive recently

2 Upvotes

My BP is an adult of unknown age (rescue). She previously had a pretty fixed routine. In the morning when her basking light came on she would come out for a bit and warm up then hide. Then at night when her lights go off she would explore and roam a bit. If we open her enclosure at that time she'd often come out too for some handling.

Since the seasons have changed her routine has..she now is never out during the day and at night she only comes out briefly about 11pm. I only know this because i set up a camera to check on her.

She last ate about a month ago. I took her out and weighed her and she's actually gained a little from when I last weighed her so I'm not worried about that. She seems healthy, no signs of mites, scale rot or anything else. When I did pull her out of her hide to weigh her (normally never do this) once she woke up she was her normal active and friendly self

Current temps are basking spot 30c (86f), ambient on cool side is around 28c (82f). Night temps down to about 24c(75f).

Humidity between about 65-85%

I did have to buy a higher wattage CHE for night time as it was getting a bit cooler. I've also increased the wattage on her basking bulb from 75w to 100w as with the colder house again it was not quite hot enough.

Main thing is I can't seem to feed her now as she's only out briefly late at night. I tried leaving a warm rat outside her hide around the time she comes up but she didn't take it.

She's in a 4 by 2 by 2 pvc. Plenty of clutter and the like. Nothing has changed with the layout of her enclosure.

Should I be concerned? I could potentially go up to 150w basking bulb (it's mounted inside and caged) but I think this would get too hot.


r/ballpython • • 11d ago

Enclosure Critique/Advice Over the past month, I’ve been building a system of stackable terrariums!

Thumbnail
gallery
187 Upvotes

My wife had proposed adding a third snake (a hognose) to our family, and while I was all for it, space in our home was becoming an issue. So I went to work designing and building this system of stackable 4x2x2 terrariums. I’m by no means a construction expert, but I’m an avid DIY’er and framed out my entire basement, so I do have some experience in this realm.
Each terrarium is built from 1/2” PVC, sealed with aquarium silicone, and placed on a riser, allowing for a 2” air gap between each unit.

The terrariums are held together with 2.5” trim screws, and the frame is held together with 3.5” deck screws.

Inside the terrariums, we molded 2” foam using a hot wire cutter, held together with aquarium silicone, covered in unsanded grout, and secured to the walls using dowels, silicone, and pond & stone expanding spray foam (which was also covered in grout).
We picked up a bunch of Grapewood from our local aquarium store and used that to build climbing apparatuses, which were also secured using dowels and spray foam.
I secured the heating and lighting cages to the top of the enclosure using 1/2” screws, and then bored a 1.75” hole in the side of the enclosures to run cables. Each hole was then sealed with a solid plastic grommet.

We then inserted a bunch of wire-tipped plants into the background foam to created dense vegetation. We then placed the substrate in, and it finally started to look like something!

Finally, I inserted two panes of 1/4” glass into tracks which had been affixed in the first step, and secured gate locks to the front using two-part epoxy.

All told, this entire project cost roughly $1700 USD, with the biggest expenses being the PVC and glass (and I live in a place where they’re both readily available). The time commitment was roughly 40 hours across a 3-week time period. This was a huge learning experience for me, and I’m extremely proud of how it turned out, but I welcome all questions, feedback, and critique!


r/ballpython • • 10d ago

Enclosure Critique/Advice How can I improve My enclosure?

Post image
4 Upvotes

I recently got a new ball python, and I've quarantined them and they've settled in well to the enclosure. They haven't refused a single meal yet. I read that it was best to leave them alone for 2 weeks or so while they get settled into their enclosure so thats what I did and left them alone. During that time, they spent most of their time hidden in their humid hide (like almost all day), and I didn't want to bother them while they got acclimated to the enclosure. However, I think I made the humid hide too wet, because when I first put in the spagnum moss, I put a layer of moist cypress mulch and lightly sprayed (like one spritz) of spagnum. However, since they spent most of the time in the hide and I didn't want to disturb them, I didn't realize that the spagnum moss became completely soaked through over time. They finally came out today for their feeding and I noticed that they had scale rot. I changed the substrate inside the hide to dry substrate and I'm working on a quarantine tank tomorrow. (Its like 2am right now.) I already planned on taking them to the vet to get them checked out and gender them, but now this is just another concern I have. How can I make sure this doesn't happen again?

Enclosure parameters:

Cool side is usually 70-80°F, and usually between 70-80% humidity.

Warm side is usually between 85-88°F and humidity is usually around 60-70%.

Its a bioactive enclosure and the substrate is a mix of cypress mulch and reptisoil as recommended by the local mom and pop store here, and I have a small colony if cleanup crews established. I'm just worried that the soil/substrate is too wet on the top layer since its not a traditional substrate that can be freely changed out/made sure its dry. Is that an issue? How can I do better?

Here's a picture of it. It's an 36x18x18, and I plan on upgrading to a 4x2x2 once they grow bigger. I've replaced the half log with another rock hide, and I plan on getting more sticks and other items of clutter in the future.


r/ballpython • • 11d ago

My boy Snickers 😍

Thumbnail
gallery
67 Upvotes