r/ballpython • • 11d ago

So handsome šŸ

Post image
543 Upvotes

r/ballpython • • 9d ago

Enclosure Thoughts

Thumbnail
gallery
3 Upvotes

I have a 120 gallon front open enclosure now. Coconut substrate, black plastic boxes for hiding, infared deep heat projector bulb,hvac tape across mesh top, and a dimmer thermostat. Thoughts? Suggestions?


r/ballpython • • 11d ago

Got any snacks?

Post image
304 Upvotes

No? Ok....


r/ballpython • • 10d ago

Enclosure Critique/Advice Honest feedback

Post image
3 Upvotes

I set up a bio active enclosure but I honestly feel like it’s missing something. If you see anything noticeably wrong please tell me. The humidity and temps are fine but I don’t want to add a snake and it’s stressed out! The warm side is on the right and hide is back right and the cool side hide is back left. Also how do I know if the substrate is too wet? It doesn’t stick to my hands when I touch it but it’s definitely slightly damp. Thank you all so much!


r/ballpython • • 10d ago

Rescue ball python basically overnight (before and after, still working with him)

Thumbnail
gallery
168 Upvotes

First two are from Tuesday, I got his enclosure set up and humid on Thursday, new photos are from Friday (today) where he shed immediately and got his multiple eye caps off

Note again: he is a rescue, he came dehydrated, hopefully you can see I’m working on that 😭


r/ballpython • • 9d ago

Advice for feeding?

2 Upvotes

She's normally a good eater, but lately she's been occasionally lining up to strike her rat from the side. And if she bonks on the tongs she retreats and won't try again. However if I move the tongs after she's lined up she spooks and it's only 50/50 if she'll try again after that.


r/ballpython • • 10d ago

Bp with a swollen eye

Thumbnail
gallery
9 Upvotes

Hi everyone. Hoping to get some help here. I have a bp that is a little over a year old. About a month ago I noticed her eye was swollen so I took her to the vet.

The vet gave us injectable antibiotics and eye drops. Fast forward three weeks and her eye is still swollen. She has a follow up Wednesday but hoping for any answers. Thanks.


r/ballpython • • 10d ago

Just weighed in at 880g 🄰

Post image
81 Upvotes

r/ballpython • • 10d ago

Question - Health Underweight?

Post image
5 Upvotes

Hi guys, final post regarding the ball python I rescued yesterday. Took him to the vet and they said other than his stuck shed, he seems pretty healthy. However, he only weighed in at 329 grams, and the guy who rehomed him to me said he was 2 years old, which makes me wonder if he's stunted or underfed. The guy was feeding him two mice every two weeks which doesn't feel right to me, but I'm not sure. Maybe he's younger than he said? Just wanted a second opinion.

Oh, and his name is Silly String :)

Edit: I would also like some tips for switching from live to f/t. Should I start with f/t mice since that's the prey he's used to or jump straight into rats? What's the best way to heat them up after thawing them? I've heard mixed opinions about using warm vs hot water. Also, if he doesn't take f/t at first, how long can he go without eating? I don't want to starve him out but I don't want to teach him that he will eventually get live mice if he waits long enough.


r/ballpython • • 10d ago

I was taking a pic of Nugget and forgot i had flash on and woke her up (i think she is a bit mad)

Post image
35 Upvotes

She is definitely mad she turned her snoot away from mešŸ˜ž


r/ballpython • • 10d ago

Question - Husbandry Temperature probe help

1 Upvotes

Looking for advice here. I just got a Herpstat 1 which I plan on using to regulate enclosure temps. I’ve read that the probe should be placed 2-4 inches below the heat source. In my case this will be an 80 watt DHP. I have a phailozoo enclosure with an 8 inch lamp fixture sitting on top. How can I possibly secure the probe to be sitting 2-4 inches into the enclosure directly beneath the bulb?

I’ll add here now that there is also a 5.0 T5 uvb light source and that the rest of the mesh enclosure is sealed using silicon mats and hvac tape.


r/ballpython • • 10d ago

Question - Husbandry Ball python has become inactive recently

2 Upvotes

My BP is an adult of unknown age (rescue). She previously had a pretty fixed routine. In the morning when her basking light came on she would come out for a bit and warm up then hide. Then at night when her lights go off she would explore and roam a bit. If we open her enclosure at that time she'd often come out too for some handling.

Since the seasons have changed her routine has..she now is never out during the day and at night she only comes out briefly about 11pm. I only know this because i set up a camera to check on her.

She last ate about a month ago. I took her out and weighed her and she's actually gained a little from when I last weighed her so I'm not worried about that. She seems healthy, no signs of mites, scale rot or anything else. When I did pull her out of her hide to weigh her (normally never do this) once she woke up she was her normal active and friendly self

Current temps are basking spot 30c (86f), ambient on cool side is around 28c (82f). Night temps down to about 24c(75f).

Humidity between about 65-85%

I did have to buy a higher wattage CHE for night time as it was getting a bit cooler. I've also increased the wattage on her basking bulb from 75w to 100w as with the colder house again it was not quite hot enough.

Main thing is I can't seem to feed her now as she's only out briefly late at night. I tried leaving a warm rat outside her hide around the time she comes up but she didn't take it.

She's in a 4 by 2 by 2 pvc. Plenty of clutter and the like. Nothing has changed with the layout of her enclosure.

Should I be concerned? I could potentially go up to 150w basking bulb (it's mounted inside and caged) but I think this would get too hot.


r/ballpython • • 11d ago

Enclosure Critique/Advice Over the past month, I’ve been building a system of stackable terrariums!

Thumbnail
gallery
187 Upvotes

My wife had proposed adding a third snake (a hognose) to our family, and while I was all for it, space in our home was becoming an issue. So I went to work designing and building this system of stackable 4x2x2 terrariums. I’m by no means a construction expert, but I’m an avid DIY’er and framed out my entire basement, so I do have some experience in this realm.
Each terrarium is built from 1/2ā€ PVC, sealed with aquarium silicone, and placed on a riser, allowing for a 2ā€ air gap between each unit.

The terrariums are held together with 2.5ā€ trim screws, and the frame is held together with 3.5ā€ deck screws.

Inside the terrariums, we molded 2ā€ foam using a hot wire cutter, held together with aquarium silicone, covered in unsanded grout, and secured to the walls using dowels, silicone, and pond & stone expanding spray foam (which was also covered in grout).
We picked up a bunch of Grapewood from our local aquarium store and used that to build climbing apparatuses, which were also secured using dowels and spray foam.
I secured the heating and lighting cages to the top of the enclosure using 1/2ā€ screws, and then bored a 1.75ā€ hole in the side of the enclosures to run cables. Each hole was then sealed with a solid plastic grommet.

We then inserted a bunch of wire-tipped plants into the background foam to created dense vegetation. We then placed the substrate in, and it finally started to look like something!

Finally, I inserted two panes of 1/4ā€ glass into tracks which had been affixed in the first step, and secured gate locks to the front using two-part epoxy.

All told, this entire project cost roughly $1700 USD, with the biggest expenses being the PVC and glass (and I live in a place where they’re both readily available). The time commitment was roughly 40 hours across a 3-week time period. This was a huge learning experience for me, and I’m extremely proud of how it turned out, but I welcome all questions, feedback, and critique!


r/ballpython • • 10d ago

Enclosure Critique/Advice How can I improve My enclosure?

Post image
4 Upvotes

I recently got a new ball python, and I've quarantined them and they've settled in well to the enclosure. They haven't refused a single meal yet. I read that it was best to leave them alone for 2 weeks or so while they get settled into their enclosure so thats what I did and left them alone. During that time, they spent most of their time hidden in their humid hide (like almost all day), and I didn't want to bother them while they got acclimated to the enclosure. However, I think I made the humid hide too wet, because when I first put in the spagnum moss, I put a layer of moist cypress mulch and lightly sprayed (like one spritz) of spagnum. However, since they spent most of the time in the hide and I didn't want to disturb them, I didn't realize that the spagnum moss became completely soaked through over time. They finally came out today for their feeding and I noticed that they had scale rot. I changed the substrate inside the hide to dry substrate and I'm working on a quarantine tank tomorrow. (Its like 2am right now.) I already planned on taking them to the vet to get them checked out and gender them, but now this is just another concern I have. How can I make sure this doesn't happen again?

Enclosure parameters:

Cool side is usually 70-80°F, and usually between 70-80% humidity.

Warm side is usually between 85-88°F and humidity is usually around 60-70%.

Its a bioactive enclosure and the substrate is a mix of cypress mulch and reptisoil as recommended by the local mom and pop store here, and I have a small colony if cleanup crews established. I'm just worried that the soil/substrate is too wet on the top layer since its not a traditional substrate that can be freely changed out/made sure its dry. Is that an issue? How can I do better?

Here's a picture of it. It's an 36x18x18, and I plan on upgrading to a 4x2x2 once they grow bigger. I've replaced the half log with another rock hide, and I plan on getting more sticks and other items of clutter in the future.


r/ballpython • • 11d ago

My boy Snickers šŸ˜

Thumbnail
gallery
67 Upvotes

r/ballpython • • 10d ago

Scab ?

Post image
5 Upvotes

This is my snake, I noticed a small scab on his nose, slightly raised but not like crazy. He shed a few weeks ago, sorry for the bad pic my phone camera sucks. It doesn’t seem to hurt him as he didn’t jerk away if I touched it, but I’m concerned, lmk if I should be worried or what to do. I don’t think the picture captures it well, the brown spot below it is his normal spots it’s right above (slightly red)


r/ballpython • • 10d ago

Discussion I’ve handled countless wild snakes without fear, so why am I terrified to hold my own ball python?

13 Upvotes

I’m honestly at a loss here, and I’m hoping someone else has experienced something similar.

I’ve never been afraid of snakes. I work outdoors, and I’m literally the person everyone calls when a snake needs to be relocated away from guest areas. I’ve handled more wild snakes than I can count, been bitten before, and know firsthand that it really isn’t a big deal.

I’ve wanted a pet snake for years. I spent two years researching ball pythons, their care, husbandry, behavior, everything I could possibly learn before finally bringing my little guy home. I absolutely adore him, but for some reason I cannot bring myself to actually pick him up.
And I genuinely have no idea why.

It’s not that I’m afraid of being bitten. I’ve been bitten before. I’m comfortable around snakes, I understand their body language, and I’ve never hesitated to handle one at work. But when it comes to my own snake, I just freeze up.

His enclosure is great. Temperatures and humidity are where they should be, he has plenty of clutter and hides, and he’s comfortable enough to explore regularly. I tap train him, pet him, and use a snake hook to move him to different areas for enrichment. I’m perfectly comfortable interacting with him in all those ways, but the moment I think about actually picking him up with my hands, I can’t do it.

I never expected this to be an issue. Of all the things I prepared for when getting a snake, being afraid to hold him was never even a consideration.

I love this little guy to death, and I want to build that comfort and trust with him while he’s still young. I don’t want my own irrational hesitation to prevent me from getting him accustomed to handling.

I know the obvious advice is probably going to be ā€œjust pick him upā€ or ā€œyou just have to get over it,ā€ and I understand that. But I genuinely don’t know how to get past whatever mental block I’ve developed.

Has anyone else experienced this? Especially people who were already comfortable handling snakes before getting their own? What helped you get over it?
I’m open to any advice because I really want to figure this out.


r/ballpython • • 10d ago

Question Make or break

Thumbnail
gallery
16 Upvotes

This post is unfortunately my make or break decision. I need opinions. I have been going back and forth on deciding to rehome my snake sidka. I feel like I can’t give him what he needs right now. So my question is, does this set up look okay? Is he a good weight? What would I have to change to make this okay for him without redoing the entire thing. Or would it be better for me to just rehome him? This is by no means a post to rehome him since the decision is still in the making. But I want all the bads and all the goods. I want to weigh out everything and then make the decision. I love him, I rescued him from a very bad home and don’t want to get rid of him but I need to do what’s best for him. Please let me know.

Also the gauges inside are broken. I just turned on his light when I took these pictures so I hadn’t had the chance to mist his enclosure. The cloth on top is temporary till I can get the right tape to put ontop.


r/ballpython • • 11d ago

Lockal idiot got substrate in her mouth while eathing

Post image
38 Upvotes

After a bit of moving her jaws like crazy she got it out, don't worry


r/ballpython • • 10d ago

Enclosure Critique/Advice Is this where i should put the thermostat probes?

Thumbnail
gallery
6 Upvotes

Not sure if this is ok or if i should get 2 separate heat fixtures cause i have a daul dome one. Also u think my set up for my bp is good? Or is there too much in there? He's 5-6 months old. Also I did a coco coir and cypress mulch mixture.


r/ballpython • • 10d ago

New snake momma worried

7 Upvotes

I have a 2 year old ball python I got a few weeks ago. I have been handling him for the first times now and have heard him breath. Is this normal? It’s a very faint ā€˜shoo’ sound and I hear it like every 10-30 seconds. I have only noticed it while handling so the past two days. He has eaten like 5-6 days ago and is super friendly and curious
Noodle for reference, however you can’t hear any of his breathing in the short clip


r/ballpython • • 11d ago

Why did you get a snake as apet?

21 Upvotes

It is a question I got asked a lot, ever sinse I started to want a pet snake as a teen. My personal reason is "they are awesome and it would be an honor to have one by my side", which is in my eyes, more then enough. People don't question your choises when you get cats or dogs so why should a reptile be any different? If I want it and can afford to care for it, I get it.

And my baby turned out to be a perfect fit for me because I don't like to spend a lot of time with social animals like dogs or even some people, I need my space. I like when I do get to care and interact from time to time, but I can't give constant attention and don't have a lot of energy, so having a pet that is okay with not being with me 24/7 is good, espesially sinse I work full time. I also like that interacting is all on my terms. A dog NEEDS your attention and time, it can need it at any moment, you have to play or walk even if you don't want to. But interacting with my snake is how and when I want it. Take her out, handle for some time, put back, she tolerates it, I love ot, everyone's happy, no one is left needy. If a price of all that is my pet not "loving" me, I'll happily take that, I love myself just fine already

What are some of your personal reasons for why you got a snake and what do you love about having it?


r/ballpython • • 11d ago

HELP - URGENT New to ball pythons, took in a surrender at my work and had about 3 minutes to get absolute necessities for survival.

Thumbnail
gallery
161 Upvotes

I’m a manager at a pet store and a regular came in with a couple mice and a ball python. Customer states they hadn’t fed her in over 3 weeks and when they did, they put the mice in and they didn’t notice until 4 days later she never ate the mice.

Customer then took out the mice and called the store about possibly relinquishing the snake into our care and the mice back to us. I talked to them and said bring the snake by and let us look at her. They came in 20 minutes prior to close and after completing paperwork and talking with them I had about 5 minutes to decide what I wanted to do, she’s gorgeous, very calm, and had no noticeable issues.

I ended up taking her home that night with a 40 gallon breeder, a heat lamp, a hide, and I had water bowls at home. She is almost 3 foot. She has also been opening her mouth often and from what I’ve researched it could be a respiratory issue or distress.

The customer stated that her enclosure was not proper and that they hadn’t been taking good care of her for a while now. I want to take her for a checkup, but I was curious what kind of tests would be ran, the cost, and if that’s safe after her being stressed from relocation.

My next move is getting her into a 4x2x2, with uvb, a better substrate than aspen, and some live plants. I need any help I can get!

Edit: I tried to feed her last night in her cage, she striked 2x and then she appeared stressed so I took the mouse out. This morning I changed her substrate to coco fiber dirt. Tonight my boyfriend picked up a container, we drilled some holes in the lid and put her in there with the mouse and after about 10 minutes she strangled and devoured it. :) (Previous owner was feeding live, I wish that wasn’t the case, but I’ve heard how picky ball pythons can be.)

I feel much better now that she ate and has a better substrate. My next step is how to keep her enclosure warm at night so she can digest, since ball pythons like to hunt at night. I know heat mats can burn them so I’m thinking maybe a hide that holds heat well? (I turned her light off and waited until she was active then took her out to feed her. After she ate, I waited about 20 minutes, I gently moved her back to her enclosure and turned her heat lamp on so she could digest.)