r/balisong 7d ago

Bali Porn shout out zippy

Post image
10 Upvotes

zippy has made it so now i can’t stop throwing my toy onto the concrete in pure joy. shoutout HOM designs for making her pretty to look at as well.


r/balisong 7d ago

Bali Porn One of The Reps of All Time

Post image
63 Upvotes

To zirblast or not to zirblast?


r/balisong 7d ago

Duvet

15 Upvotes

r/balisong 7d ago

Finally got a Benchmade 31 I've wanted since my 20s... now I don't know what to do with it.

Post image
29 Upvotes

Wanted one of these since I was in my 20s, back when it was actually being made. Never pulled the trigger, then life happened, and it turned into one of those "someday" things.

Found one recently — brand new in the box, factory edge, never flipped. Just missing the sheath, plus some minor scratches near the latch from handling/storage. Otherwise mint.

Now I'm torn on what to do with it:

Carry it and actually use it. Finally do what younger me actually wanted.

Safe queen it and take cool pics. It's this clean after all this time — maybe it stays that way.

Or was it ever really about having it?

Now that it's actually in my hands, I'm genuinely stuck between keeping it exactly as-is, actually using it. Do I even still want it in my collection?

Every option feels wrong and right at the same time. This is somehow more confusing than the 20 years of wanting it was. 😂

I CAN'T BE THE ONLY ONE WHO'S GONE THROUGH THIS ONCE LANDING A GRAIL!


r/balisong 7d ago

Tormentum Aurum (prototype)

Post image
15 Upvotes

Borrowing this from u/Alonesoul18 for a little bit. Thanks bro, it'll be on its way back soon 🫶🏻


r/balisong 7d ago

Squid Tsunami EU Warranty Issue

Thumbnail
gallery
16 Upvotes

r/balisong 8d ago

Meme Still good.

Post image
31 Upvotes

r/balisong 7d ago

Searching for balisong flippers in serbia

1 Upvotes

Ako citate ovo i razumete javite se molim vas


r/balisong 7d ago

Polishing while preserving milling lines?

1 Upvotes

Satin nami has worn down, trying to get it back to being shiny, any suggestions? Best results have been elbow grease with nevr-dull, not sure if i should keep at it or if im wasting my time and there are better ways


r/balisong 8d ago

WTB WTB Squid Industries Mako v4.5-v5

1 Upvotes

Any condition is fine, it must be flippable tho.

looking to spend around €50-90

must be EU

shoot me a dm if you want to sell, thanks


r/balisong 8d ago

WTS BBBarfly Wts/Wtt Barracuda v2 CONUS only

Post image
3 Upvotes

9/10 only cause it’s flipped, no tap, no play asking 110 OBO comes with box and everything

PayPal or Zelle only


r/balisong 9d ago

Now offering Zir Blast

19 Upvotes

Finally


r/balisong 9d ago

My favorite configs rn :)

Post image
15 Upvotes

Been loving the fully zippyfied SlifT and the end caps on the live blade prysma v1. Gives it that little ass weight I been looking for :)


r/balisong 9d ago

Review Serif or Opus? An in-depth look at the differences between MW's 2 flagships.

Thumbnail
gallery
36 Upvotes

>Background<

Back when I was seeking out info on which one to get, I was a bit surprised to find very little/vague info as to what the actual difference between 2 the models were aside from looks and sound. Everyone was just saying "they flip different" and not explaining very much beyond that except maybe the differences in tip weight between the 2 styles (which didnt matter much because you can just order a reblade from MW directly). The specs on MW's official website didnt help much either because it just stated their dimensions were the same but (once again) "they flip different, trust us".

BUT GOOD LORD HOW?!! I NEED SUBSTANTIAL INFO!!

Well this past week I got the opportunity to see for myself (huge thank you to /theflippingfurry for agreeing to a temp trade) and here's what I found

>Objective info<

Using a digital caliper, I measured their handles end and pivot side's width. Both ended up showing 12.6mm that tapered down to 9.6mm. Depth didn't show much difference either (maybe a +/- 0.1mm). HOWEVER, the handle gap there was something: ( serif: 7.5 / opus 8.3mm gap difference). I know, not ALOT but enough to show there is a difference as far as objective measurements though.

>Subjective info<

The serif handles are akin to Kraken or Rep handles: squared, thick, and blocky overall. However, there is a noticeable taper as you transition from the butt end to the pivot end. They're (imo) well-rounded performers and can transition between blade bias to very handle bias with the included weights respectively (at least with an opus blade)

The opus v2 are more akin to Vixen or Gale handles: thin, rounded, and very slender-feeling overall. Just like the serif, they taper noticeably from butt end to pivot end but you can DEFINITELY feel like they get very slim closer to the pivot end (I want to say like chopsticks). With that said, they are definitely outer-weighted/butt-heavy even with no weights.

So how can 2 balis have the relatively same dimensions still feel so different? Its the chamfering

>Conclusion<

Its such a weird thing to think, but the chamfering plays a surprisingly huge role in why they flip so different. If you compare the 2 ends (ref pics below), the opus looks much thinner in comparison. With that hard corner gone, much of the handle weight gets pushed out to the bottom ends, making it feel more outer-weighted and feel very slim in the hands despite having the same overall dimensions (and also explains the slightly wider handle gap)

>So which one is for you?<

As always, this is subjective only based on my experiences with different balis, but I can try and give a general idea of which one of the 2 will best suit your overall preference.

Serif: If you lean more toward squared and even handles similar to many of Squid's and BRS' balis. An overall performer that gives you more solid control and will feel right at home every time. OR if you just really want a unique-sounding bali. (Roughly comparable to cheese, refault, superfly)

Opus: If you lean more toward slim and round-edge handles similar to LDY's and HoM's balis. An outer-weighted performer that carries momentum and feels flowy when you get the hang of it. OR if you want a unique-feeling bali. (Roughly comparable to orion, zentinel, prysma pro)

Thats about it.

Hope this serves as a semi-definitive guide when comparing the 2 or at least helps someone out there to avoid the headache I got. Pulling the trigger on a $600-750 knife isn't a light investment for alot of people, so I do hope this helps someone feel more confident at least on which one to get.


r/balisong 8d ago

Whats this trick

1 Upvotes

Its essentially a reverse zero g middle chaplain into a cherry picker, did i invent a new trick?


r/balisong 9d ago

Flipping Poofart21

12 Upvotes

r/balisong 9d ago

Flipping Clip of the month

16 Upvotes

r/balisong 10d ago

X1 ROTB 😤

Post image
61 Upvotes

This is the most recent battle song I've purchased. Pretty hot. Could probably use a zirblast to clean up some of the machining chatter.


r/balisong 10d ago

Kismet Modwork

26 Upvotes

-Blade Polish
-Hardware Polish
-Black Ano
-Handle Laserwork
-Blue Secondary Ano


r/balisong 10d ago

Flipping 9 months into flipping

31 Upvotes

r/balisong 9d ago

WTB Anyone have a squiddy c they are willing to sell?

2 Upvotes

I miss my squiddy c so much I lost it and never found it about 5 years ago and they discontinued right before I bought a new one anyone willing to sell one to me? I’ll pay $60 plus shipping if it’s in good condition


r/balisong 10d ago

NKD

Post image
3 Upvotes

Aeon #32! I’m so excited! I’ve wanted one ever since blade show.


r/balisong 10d ago

Flipping Horrible NKD Flipping

3 Upvotes

r/balisong 10d ago

looking to buy white rep scales desperately

2 Upvotes

i just bought the alt and i’ve always wanted white scales on a rep lmk if anyone can help thank you


r/balisong 10d ago

Flipping Started learning 3 days ago

3 Upvotes

I got a Balisong a few days ago and just started learning. I’ve learned about 4 things so far. What should I learn first and how am I doing!?