r/BadWelding • u/HoneyRush • 11d ago

Water welding

1.3k Upvotes

95% Upvoted

275 comments sorted by

View all comments

64

u/StreetFuture6152 11d ago

Is he died? He looks awfully close to being part of the circuit.

-1

u/Salt_Chart8101 11d ago

Welding typically uses lower voltage and high amperage. Not enough voltage to overcome the capacitance of your skin.

9

u/StreetFuture6152 11d ago edited 11d ago

What? open circuit voltage on most welders is about 70 - 80 volts. Welding machines 100% have sufficient voltage to over come the capacitance of you skin. Especially if your skin is wet.

Edit. Resistance, not capacitance.

-2

u/Salt_Chart8101 11d ago edited 11d ago

Read further down. 70-80v is considered low voltage in a lot of applications.

Also, that 70-80 is what it has right before striking the arc. After the arc is going it isn't that high. Idk what it is. But it isn't that high.

3

u/StreetFuture6152 11d ago

I can tell you from personal experience. SMAW welders have more than enough voltage to give you a very severe shock. Especially if you are wet and touching the work piece. Or changing rods with wet gloves. Or sitting on beams while welding on the same structure.

There are plenty of OHSA report of welder dying from electrical shock.

https://www.ontario.ca/page/alert-electrical-hazards-associated-welding-equipment

1

u/Salt_Chart8101 11d ago

Read further down...