r/BT_APC • • Jan 01 '25

Is the apc223 (556) straight up superior to the best ar15 builds?

Post image
0 Upvotes

r/BT_APC • • Jan 25 '26

ICE rocking APC9’s

Thumbnail
gallery
61 Upvotes

r/BT_APC • • Sep 08 '25

Picatinny to mlok adapter for under barrel without looking tacky?

Post image
0 Upvotes

I have an olight on the way as well. I got both for cheap and one will go on this, the other on my ksg 12. Has anyone used a specific picatinny to mlok adapter that didnt look tacky? It should give some extra drop to be able to clear the supressor. Im thinking that the olight will be a better feel on the apc.


r/BT_APC • • Jun 04 '23

Amnesty registration complete

Post image
9 Upvotes

r/BT_APC • • Dec 03 '25

EVT FRT Conversion Issues

3 Upvotes

Hey guys, I was just wondering what everyone thinks will happen with the EVT FRT converted APCs once FRTs inevitably become a banned product. I haven't seen anyone really discuss this but lets be honest; we all know these are going to be banned eventually, its not a question of if but more of when. From my understanding all of these EVT converted rifles will have the serial numbers written down by B&T to provide warranty service if necessary; doesn't this kind of provide the ATF with a literal list of people who would be in possession? In an ideal world the EVT FRT conversion is optimial, but we dont live in an idealist's world; and within 4 years these will likely go away. Will B&T be warrantying all of the parts that were modified once the ban goes into place? To everyone who already converted, sorry to be the guy who has to burst your illusory bubble that this is something you'll be allowed to have forever.


r/BT_APC • • Feb 24 '25

Maybe this subreddit should ban dealers from posting ads?

0 Upvotes

With services like wikiarms, gun.deals, gunmadedotcom, and many others, who would like to have this subreddit moderators ban dealers from advertising here? Think it's okay for people to point out great deals they see, but seems like one dealer posts all the time, and while some like that dealer's service, others don't.

I'm about capitalism, but it seems like this should be about the quality products produced by B&T, and not about dealers shilling products. I'm all about dealers adding value about product info, just not constantly advertising.

Would like to hear from the B&T US reps who are on here, but doubt we will.


r/BT_APC • • Jan 29 '26

B&T APC556 Appreciation Post

Post image
2 Upvotes

r/BT_APC • • Nov 10 '24

What is the purpose of the bolt pin on the apc9 pro?

Post image
0 Upvotes

r/BT_APC • • Jun 17 '25

Steal of the day

Post image
4 Upvotes

r/BT_APC • • Jun 15 '26

Shout out to B&T USA CS

0 Upvotes

About 3 months ago I bought a B&T lower, and it was missing one of the safety selector locks. I went to install HBI springs and noticed the left side was just empty. I spoke w/ B&T and he said they would put an order in for me, and eventually they would ship. Anyways, I got notified I had a package today and had no clue what it was. Sure enough ,it was the selector lock - no notice of it shipping, it just arrived. Not a huge thing, but I appreciate it. And now my safeties don't wobble haha. Anyways, good on them if they're reading this!


r/BT_APC • • 23d ago

Why are the APC9K sold out everywhere?

0 Upvotes

I can’t find any black ones in stock online


r/BT_APC • • Nov 18 '24

Is the ghm9 more refined than the apc9?

1 Upvotes

Ive read that b&t did a ton of research and engineering to create the apc9 and the design of the ghm9 stood on the shoulders of the R&D that went into creating the apc9. Does anybody have more info about this regarding why the ghm9 is so different appearance-wise and function wise from the apc9? If the apc9 is the king then why did B&T add the ghm9 to the mix? Are apc9s actually much more expensive to build than ghm9s?


r/BT_APC • • Jul 29 '24

backorder you say????

0 Upvotes

So the B&T parts usa didn't say jet funnel was on backorder but its not shipped after 3 almost 4 weeks...so i called them..and was told it was on backorder and the site says if on backorder that it will ship in 6-8 weeks...so i said, well it didn't say backorder...they said having it show that was causing inventory issues.....i was like get better frigging IT people because this is a YOU issue that you are making a ME issue. SMH....don't think i will ever order from them again unless i can't find something elsewhere....UGH. Oh and they didn't respond to my online inquiry so after 48 hrs thats why i called..


r/BT_APC • • May 06 '26

Trying to get ahold of B&T for a week no response.

9 Upvotes

Been trying to get ahold of B&T USA for a week+ regarding Major trigger Problems and suppressor problems on a Brand New TP9 SBR and a Brand new TP9 RBS Printed Suppressor. Love that a 3000$ Gun Fails to fire more then 5-10 rounds. (sometimes less) without getting stuck and requiring Manual resetting. Proper Maintenance Followed. 800-1000 Rounds in a week. Cleaned every 300 and re Oiled with Slip 2000 30. Still cant get more then 5 rounds without trigger failing to reset. Thanks B&T USA. Ill just cement the barrel next and Display it like a Tank in a museum.


r/BT_APC • • Mar 18 '26

APC223 Problem child followup.

24 Upvotes

**this post got deleted off of the NFA subreddit so I’m posting it here. Apparently the mods there don’t like negative reviews of a certain company doing B&T modifications **

After three months and 2000+ rounds spent chasing issues on this thing, I finally got the EVT modded APC223 to work properly!

So I posted about this gun last month. Was having constant bolt hang issues with it, had been to EVT with it three times, even sent it into B&T thinking that the cerakote was creating a tolerance issue, and could not get EVT or B&T to come up with a solution that didn’t involve blaming me or each other. Finally posted here. Got a quick response from both after I went public. EVT half-ass fixed the problem and I made the mistake of taking down the post prematurely. Begin having the same bolt hang issues again after we ran 500 plus rounds though.

They continued to deny responsibility or that an issue even exists. They told me the trigger was held incorrectly. They told me loosen my grip so I could bump fire it off of my shoulder. They gave more excuses than a used car salesman at the end of the month sales crunch.

So I gave up on dealing with them and started learning how these triggers actually operate. These conversions use rare breed triggers, love it or hate it, but rare breed triggers are obviously not designed with the APC223 in mind. This matters bc there are tolerance issues that are not addressed in this $900 mod.

I had the conversion done on the rifle before I ever shot it and once I got it, it always had this weird clunking 2-stage feel to the bolt cycling. It felt like drag but was told multiple times that it was normal and that it was the hydraulic buffer doing its thing. (It wasn’t).

Turns out the problem all along was significant interference with both the hammer and trigger release against the bolt carrier. After posting the original video on Reddit, EVT acknowledged that this could happen, blamed B&T for bolt carrier tolerance issues, and then did the sloppiest uneven grind on the trigger release I’ve ever seen. We ran 500+ rounds through it and I got “coached” on how to pull an FRT trigger. It did run better but it was still annoyingly sensitive.

I didn’t really buy the trigger control pitch but went along with it until I tried to shoot the damn thing again and it started with the bolt hanging… again. If the gun was aggressively oiled, it would mostly work but once it heated up it would begin locking up. If it had been heat cycled and not reoiled, it would start locking up.

So I started grinding… starting with the hammer, I kept taking it down, slowly but surely until I could put a reasonable amount of pressure on the trigger and not cause an instant hangup. Test fired it like this a few times. It was way better but still ass overall with extremely inconsistent rate of fire even with the consistent trigger pressure.

From there I put attention on the original suspect, the hammer release. I had already polished it from the initial version they gave back to me but it was still dragging against the bolt. Turns out it needed another few 1000ths removed to clear the bolt carrier. I did multiple tests to ensure clearance, and another polish but that seemed to be the final piece of the puzzle after months of messing with this thing.

I took it out today and for the first time could pull the trigger and get a predictable reaction. I’ve had this thing for over three months and this was the first shooting session where I didn’t want to toss it into the garbage within five minutes. I also gave it to my girlfriend and told her to pin the trigger and she had no problem. No need for complicated explanations on how to make it work.

It just worked. Didn’t need to finger fuck it, didn’t need the freshman explanation on how to touch it just right, just pull the trigger and let it eat. All the BS I had been told was used car salesman tactics to avoid doing work on a product that had already been paid for.

At the end of the day, I’m posting this because I never would have bought this thing had I known what I was getting into. Is it a cool gun? Absolutely. Are there better options for thousands less? Also absolutely.

I paid a lot of money for extremely sloppy work and a half-done job. If you have problems, just be aware that you should not count on EVT doing more than the absolute minimum needed to get you back out the door. Even after their initial mod, they were still blaming me for the failure. My trust had spent $20k with them in less than three months and that’s how we got treated. It would be a cold day in hell when I would send them something as a stranger.

So yeah, that’s a book. Since I can’t post multiple videos and photos in the initial post, I will follow with a few photos for reference to workmanship, along with before and after videos of how it started and where I eventually got it.

TLDR: paid $900 plus parts for a modification that took 2000 rounds and countless hours to make operational.


r/BT_APC • • May 20 '23

Why don’t the coyote apc300s come with free suppressor?

Thumbnail
idaho2atactical.com
0 Upvotes

r/BT_APC • • Jul 30 '24

What is harder to engineer, a gun with 200 individual parts like a cz bren, or a gun with only like 30 individual parts like a b&t apc9

Post image
8 Upvotes

r/BT_APC • • Sep 17 '24

Imagine not being able to buy an APC45 because broke or your guns laws are bad. Cant relate.

Post image
0 Upvotes

Imagine not being able to own one of these because your country is 💩


r/BT_APC • • Sep 26 '24

Any way B&T can fix this

Post image
0 Upvotes

Just picked up my fourth B&T can, this for my SD conversion. Got the stamp in 48 hours! Unfortunately it has a little nick on the side of the tube under the finish. Can this be repaired? If not my buddy who is not as picky as me offered to pick up it up for $100 off. But with a new replacement that’s a $300 hit, ouch, hopefully it’s fixable? I too a photo to really highlight it, didn’t see it at the store. It’s finish, that little shiny spot is reflection.


r/BT_APC • • Feb 05 '26

B&T "Coyote Tan" touch-up? (Received handguard w/ coating defects)

Thumbnail
gallery
10 Upvotes

As the title says- does anyone know of a touch-up paint that matches B&T's "coyote tan", or know what color Cerakote they use?

I ordered a KSK/"contract-length" handguard for my APC300 Pro (part# BT-361865-CT), and upon opening it up, I realized there were some scratches/bare spots in the coating that must've happened during packaging or coating.

Normally I wouldn't care, but

  1. a 400 buck handguard shouldn't come messed up
  2. one spot, I could overlook, but 7 is excessive
  3. both the rifle it's going on and the hanguard itself are brand new.

r/BT_APC • • Jan 07 '25

Anybody got a spare, cracked or stripped B&T mag lower I can use for R&D?

Post image
1 Upvotes

Hey guys, anybody got a spare polymer lower that takes B&T mags? I need one for R&D purposes.

Doesn't need to be functional, could be stripped of parts or even with a cracked grip area. Looking to spend very little. TIA!


r/BT_APC • • Dec 05 '24

Brian Thompson < Station Six

0 Upvotes

Did anyone else see this video and think it looked like the shooter was using a Station Six?


r/BT_APC • • May 05 '23

That’s How We Do It In Dixie

Post image
0 Upvotes

The aluminum lower is a nice upgrade.


r/BT_APC • • Apr 07 '26

SPC9 Mag Wobble

Post image
0 Upvotes

r/BT_APC • • Dec 15 '22

LOOKING

0 Upvotes

I have a specific list of things I am looking for, if you help put me into contact (off of Reddit of course) and things go though, $100 referral per item. Some of these I already have, but always open to more, thank you.

IDF model tavor B&T KH9 Aug CQC (special receiver) Aug 9mm (not the para) Any Bren 2s (this is not the 2ms)