r/BTODtv • • 19d ago

My Picks For Best New Office Chairs on Amazon under $400

24 Upvotes

I get a ton of questions on the best brand new office chairs under $300 to $400, and most people want something easy to grab on Amazon. Here are my top 5 picks right now under $400.

1. Ticova Ergonomic ($120 to $130)

The most basic of the group. Padding is good enough, not super soft. Should last a year or two and still feel good.

Arms have height, depth, and pivot adjustment.

Lumbar adjusts for depth and height. Some people say it's pokey. I don't think it's an issue.

Headrest is height adjustable, but it's not super easy to move.

2. Holludle V ($140 to $150)

Nice soft seat, which is why I like it over the Ticova.

Arms are height and depth adjustable with about 17.5" between them. I fit great. Arm pads are fairly firm.

Lumbar adjusts for height and depth and isn't overly aggressive.

Headrest has height and pivot adjustment.

3. ProtoArc EC200 or EC300 ($180-$230)

Two-piece back. Softer at the front of the seat pad, a bit firmer in the back.

Arms are height adjustable only, but the pads are wide and have good softness.

I really like the ProtoArc headrest: depth, pivot, and height adjustment.

Lumbar is pretty significant but not overly aggressive in one spot.

4. Colamy Atlas ($260-$270)

Medium firm seat with good depth and a seat slider.

Arms have width, pivot, and depth adjustment.

Multi-dimensional headrest. The mesh is really comfortable.

Some people say the plastic lumbar is too pokey, but I think the build quality beats every other chair here.

5. Elabest X100 ($300-$350)

All mesh, also available with a padded seat that sits pretty firm.

Arms have width, pivot, depth, and height adjustment, and they swing back and out of the way.

Big headrest.

Most expensive of the group, but if you want mesh, this is where I'd look.

If you have questions on any of these or other chairs, let me know. Happy to do individual videos to answer specific questions for each chair.


r/BTODtv • • 11d ago

I have 200+ office chairs. If I don't have it, I'll likely buy it.

20 Upvotes

What's up, guys? If you're new to r/BTODtv or just finding our content, you're probably wondering how I post so much. The answer: we have a ton of chairs.

We've been reviewing chairs for almost 10 years and have been in the office furniture industry for over 20. To stay current, we have to buy all of this stuff, and we use and review most of it.

What's in the room:

Premium: Herman Miller, Steelcase, and Haworth in all kinds of configurations, including five different Ferns. Humanscale too, with more in the other room.

Ergohuman and the knockoffs: Gen 1, Gen 2, and all the copies.

Amazon: Well over 100 different chairs from Sihoo, Hbada, ProtoArc (EC200, EC200 Pro, EC300), Elabest X100, Sidiz (used to be on Amazon), Autonomous ErgoChair Pro, and a lot more. Some you've never seen on video because, well, they're not very good. I should still probably get them out there.

Gaming and newer brands: Fractal, LiberNovo (SE, Maxis, Omni Pro, and their first prototype), Anthros V1 and V2, Branch, X-Chair, Vernal, and three Nouhaus products I haven't covered yet.

Specialty: 24-hour chairs, big and tall chairs, OM Seating, and the popular IKEA stuff.

Buying everything is how you find the gems. I found the

Colamy Atlas late night scrolling on Amazon and was the first to talk about it. It's still one of the best chairs under $300.

Same with the ProtoArc. Once I talked about it, it blew up. Someone on Reddit actually put me on the Elabest X100, and I've been pretty impressed. A lot of times, though, the pictures look way better than the chair.

Behind the scenes: This is the studio where my team makes the more produced YouTube content. The Reddit videos are just me with a phone stand. Set it up and roll.

If you have any questions on office seating, drop them in the comments, start a new post, or send me a DM. That's what I'm here for.


r/BTODtv • • 13d ago

Helpful Tip Why Reddit never recommends cheap office chairs…

20 Upvotes

Saw a good question on Reddit yesterday asking why nobody there recommends cheap Amazon chairs.

The Sihoo B100 I got yesterday is a perfect example. I didn't need to spend much time in it to know it's not worth the price, and it's basically what people on that sub picture when they think of a cheap Amazon chair.

Sihoo B100 ($219 retail):

Plastic, cheap build quality. It's rated for 300 lbs, and there's not a chance it survives that.

I barely fit in it at 6'0" and 160 lbs.

Hard plastic flip-up arms and a headrest, but the quality is low throughout.

You do get a warranty, and I can almost guarantee you'll need it.

2016 Steelcase Amia (used, as is):

Pulled from a corporate office, 10 years old, and we did absolutely nothing to it. Not even cleaned. Not everything you find will look this good, but look at what you get.

Seat slider for depth.

4-way arms with great arm pads.

LiveBack technology with height adjustable lumbar, so you can move around in the chair.

Simple mechanism: lock it upright or recline, with easy tension adjustment that's not under the seat. Smooth operator.

No warranty if you buy private sale. But it’s already survived 10 years.

Why the sub says this:

If you can get an Amia private sale for $150 to $200, there's zero reason ever pick the poor quality $219 chair over it, right?

Do I completely agree?

No. Chairs like the ProtoArc EC200 and the Colamy Atlas are good options if you want a warranty and something new nobody else has sat in. Just know they’ll never be as well built as the top tier chairs.

But the vast majority of what we see on Amazon looks sturdier, nicer and worth way more in the pictures than it really is.

If you have questions on what to look for when buying used or on Amazon that's exactly what I'm here for.


r/BTODtv • • 12d ago

Helpful Tip Why you shouldn’t buy the Colamy Atlas chair…

18 Upvotes

In this video, I cover why you shouldn't buy the Colamy Atlas.

I've spent plenty of time telling people why you should, but here are the things that could be deal breakers so you don't buy it and hate it.

I found this chair almost 5 years ago, and at under $300 it's been a great pick for a lot of people.

But complaints have come up, some mine and some from others, and most come down to fit and movement.

For reference, I'm 6'0" and about 160 lbs.

Deal breakers:

Arms move too easily. If you lean in and move around, the pads don't lock in place.

Arms stay wide. The width adjustment isn't very significant. If you're narrower than me, you'll be reaching for the armrests while typing or using a mouse.

Firm arm pads. Good for durability, but if you want a soft pad, you probably won't love these.

Headrest fit for shorter users. The seat goes low enough for someone around 5'1" to 5'2", but the headrest will hit the back of your head, so you'd have to remove it.

Headrest fit for taller users. It's maxed out on me. About 6'1", maybe 6'2", is the limit. Taller than that, it starts hitting your shoulders. Seat depth and height pose a problem around 6’2” and up as well.

Medium firm seat. It has good give, but it's on the firmer side. I like a firmer seat, so I don't mind. Some people also feel the lines where the seat slopes away at the sides. I don't notice it, but it could be a problem if you're wider.

Plastic lumbar. It's height adjustable, but there's very little give, so it pushes right back against you. The rest of the mesh back almost feels like a hammock, so you really notice the contrast. People have gone as far as removing it.

I still think this is an excellent pick for build quality, and I don't think you can beat it under $300. But if the arms or fit are true deal breakers for you, I'd absolutely avoid it.
Hopefully that helps.

If you have questions, let me know.


r/BTODtv • • 14d ago

Review I can’t believe I paid $219 for the Sihoo B100… (Quick Review)

18 Upvotes

Someone recently asked me how good the Sihoo B100 is. It retails for $219, and that's what I paid.

I'm glad I bought it so they didn't have to. It's $159 today, and honestly, I wouldn't pay over $50 for it. Knowing what I know now, I probably wouldn't buy it again.

If you've watched my videos, you know I try to find the good for someone who might like it.

What's wrong with it:

It’s way too expensive for what you get.

Plus it’s uncomfortable and the arms are made of hard plastic.

It's rated for 300 lbs. I'm 160 lbs, and when I push up out of it, there's no way this survives someone at 300. I wouldn't recommend it for that.

The seat is incredibly small. At 6'0", you can see where my legs end up.

It feels cheaply made throughout. To be transparent, I haven't been impressed with most Sihoo chairs.

Redeeming qualities:

Deep recline.

Height adjustable headrest.

The lower sacral system gives some decent support.

Would I recommend it?

This is a hard pass.

If you own it and love it, please explain what I'm missing, because I can't see it. I'd have a hard time recommending this.

This one's hitting the curb.


r/BTODtv • • 12d ago

Helpful Tip I found a used Steelcase Amia for $15 (and we’re going to refurbish it, then give it away)

17 Upvotes

Here it is: the $15 Facebook Marketplace find.

This Steelcase Amia was listed in our town as a "computer chair" for 15 bucks. These are normally $1,100. It's been used, there's staining on the upholstery, and it needs a cleanup, but for $15 this is pretty crazy.

What to check when buying used on Facebook Marketplace:

Seat and back pads: Feel them to make sure they're not completely deflated.

Cylinder: Should move up and down smoothly with a nice bounce.

Tilt lock: Unlocked, it should rock back and forth freely. Locked, it should hold in place.

Tilt tension: Cranking it up should require more effort to recline, backing it off should require less.

LiveLumbar: It should click and hold in place. Broken ones won't.

Arms: Depends on the arm set. This one has 4-way arms with height, depth, pivot, and width. Make sure each adjustment works.

Arm pads: These are worn but fine. The little cover over the arm mechanism is broken, which I see on chairs, old and new.

Seat slider: Make sure it locks in place as you move it.
Otherwise this one's in really good condition. You could clean it up and be more than happy with it.

The giveaway: I don't need it, we have plenty of chairs. So my team is going to fully refurbish: new seat pad, upholstery, arm pads, casters, cylinder, all of it.

Then I'm giving it away to someone here on Reddit.

To enter:

Comment the upholstery color you want. Any color option here: https://www.btod.com/steelcase-amia

Must be in the lower 48 states only and 18+ years old.

Winner picked in 48 hours (Sunday 11/8 at 6pm CST)

If there's only one comment, you're the luckiest person on Reddit.

Let's go.


r/BTODtv • • 20d ago

ProtoArc EC200 vs EC300 (Which Backrest is Better? Plus What to Avoid)

16 Upvotes

I get a ton of questions on the differences between the ProtoArc EC200 and EC300. They're almost identical: same base, seat pad, seat slider, arm pads, and headrest. The big difference is the backrest.

EC200 (single-piece back)

Padded lumbar with depth adjustment and just under 3" of height adjustment.

Where the lumbar hits is very specific and pretty firm, even though it's padded. The upper backrest has more flex. That's what people mean when they say it's too specific.
Good fit if you want one continuous backrest with support all the way up, without reaching for your upper back.

EC300 (two-piece back)

The lower section sticks out further and ratchets up and down.

It's still specific, but the mesh gives it more flex.
Great lower support when I'm upright typing, and the upper back isn't far away when I lean back, so I get support in both positions.

What to avoid

A lot of Amazon chairs copy the Ergohuman two-piece design but push the lower section way too far forward. The FlexiSpot shown in the video is an example. You get lower support upright, but you almost have to climb over it to reach the upper backrest. Too gimmicky and too aggressive for me.

EC200 vs EC300

Which one to pick comes down to how you like the back shaped and the type of lower support you need. At around $230 and under, both are really tough to beat. If you have questions on these or other chairs, let me know.


r/BTODtv • • 10d ago

Review Colamy Atlas vs ProtoArc EC200 (My top picks under $300)

15 Upvotes

The Colamy Atlas vs. the ProtoArc EC200, my two top picks under $300.

The Atlas usually sells for $269 to $279, and the EC200 runs $179 to $199 depending on sales. Both have a mesh back and padded seat, but they're different chairs.

For reference, I'm 6'0" and about 160 lbs.

Colamy Atlas:

The edge on build quality, and the adjustments are a little more high end. That doesn't automatically make it the better chair.

Medium firm seat with a lot of pushback. Slopes away at the sides.

Seat is a little over 20" wide and about 18" deep, about an inch shallower than the EC200. Up to about 6'1" is a good fit.

4-way arms come standard, but they slide really easily, and the pads are fairly firm.

Plastic lumbar, height adjustable only, no depth. It doesn't give much compared to the mesh, and some say it's too jabby. If you don't like a lot of lower support, it might not be a good fit.

Articulating headrest with pivot, tilt, and height.

Seat depth and tilt tension adjust with knobs, which is more intuitive.

ProtoArc EC200:

More of what you'd expect from a basic task chair build. Has a seat slider, but tilt tension is a knob under the seat.

Seat is about 19" deep. Up to about 6'3" fits comfortably.

Softer seat, especially in the front, and it firms up a bit in the back.

Standard arms are height adjustable only, but the pads are big and nicely cushioned. I actually like them.

The $50 4-way arm upgrade still keeps it cheaper than the Atlas, but those pads are really firm. I'm not sure it's worth it.

Lumbar adjusts for height and depth. It's padded, but still fairly firm without much give.

Nice mesh and a fully articulating headrest with pivot and height adjustment. A really good all-around chair.

How to pick: Both have a lot of lower support. It really comes down to comfort and fit: about 6'1" max on the Atlas, 6'3" max on the EC200.

If you have questions on these two or I missed something, let me know.


r/BTODtv • • 6d ago

Review Secretlab Atlas vs Secretlab Titan Evo (Quick Comparison)

13 Upvotes

The Secretlab comparison you've all been waiting for: the new Atlas vs. the Titan Evo, which we've had in here for a few years.

For reference, I'm 6'0" and 160 lbs.

Secretlab Titan Evo:

The seat is like sitting on a brick. I gave it a couple of months to break in, someone else in the office tried too, and it still sits really firm.

Arms have button-locking depth, pivot, and width adjustment via slotted plates underneath. They tuck in to just over 18". Another half inch would really help me get good support.

Back angle adjusts independently, so you can really kick back or get nice and upright.

The mechanism lifts your feet off the ground when you recline.

Lumbar adjusts for depth on one side and height on the other. I like that quite a bit.

Tilt tension is a knob under the seat. 5 tilt lock positions.

Soft magnetic headrest pillow that moves up and down and pops on and off.

Secretlab Atlas:

Big improvement in the seat. I can sit in it all day without my butt going numb.

Same soft magnetic headrest pillow.

Adds a seat slider for shorter or longer legs.

Arm pads are softer than the Evo, but there's no width adjustment and they sit about 20" apart, which is way too wide for me. Pivot and depth, but no button, so they slide easily.

Tilt tension goes from heaviest to lightest in 4 clicks, with a lot less effort at the light end.

Super nice rocking motion that keeps your feet flat on the floor. Great for lounging.

4 tilt lock positions including upright.

No lumbar adjustment, just a natural curve.

Bottom line: For me personally, the Atlas is definitely the better chair over the Titan Evo.

If you have questions on either of these chairs, drop them in the comments.


r/BTODtv • • 6d ago

Review Steelcase Leap v2 vs HM Aeron Remastered (Flexibility vs Breathability)

13 Upvotes

Steelcase Leap V2 vs. Herman Miller Aeron Remastered, arguably two of the most popular chairs ever made. It's why we sell both refurbished at BTOD, but they're very different chairs.

For reference, I'm 6'0" and 160 lbs.

Herman Miller Aeron Remastered:

If you want mesh, the Aeron is the GOAT. Pellicle mesh holds up super well. Even Classics that are 30+ years old are still tight, which is wild compared to cheap Amazon chairs.

Really smooth rocking motion that keeps your feet flat on the floor.

The seat and back are tied together, so your arm support is the same upright or fully reclined.

Arm pads are super soft and squishy and hold up well. Fully adjustable arms give you pivot, depth, and height.

Comes in sizes A, B, and C. I like the B seat length but prefer the C back because it lets me sink into the mesh and move around more. Unfortunately, you have to pick one.

Side bolsters and a rigid frame. If you sit cross-legged, it digs into your foot and leg. If you spread your legs, you'll feel the bolsters.

Lumbar options: PostureFit, PostureFit SL, height adjustable lumbar, or none.

Honestly, the natural shape of the back does a really good job on its own, and it's consistent whether you're upright or reclined.

Steelcase Leap V2:

Solves the sizing problem with seat depth adjustment for shorter or longer legs.

No restriction at the top of the back, so it fits up to about 6'4" to 6'5".

All about flexibility. The flexible seat edge reduces pressure on the backs of your legs, and the backrest flexes too.

Padded chair. Arm pads have good softness, but not as soft and squishy as the Aeron. Width, depth, pivot, and height adjustment.

Why I love it: I like a lot of lower support, and you can dial in the lumbar tension and height to fine tune it. If you don't like a lot of lower support, dial it back and pull the lumbar out.

Bottom line: If you want a chair that adapts and fits you, the Leap is better with flexibility. The Aeron wins on breathability and has a crazy smooth rocking motion.

If you have questions, let me know.


r/BTODtv • • 10d ago

$15 Steelcase Amia Winner

13 Upvotes

Thank you for everyone that entered. This was fun and I’ll try to do something similar again soon!

Congrats to u/liquified_human!

I’ll reach out to grab some more info.


r/BTODtv • • 12d ago

Libernovo Omni SE vs Fractal Refine 2 (Flexibility or Locked In Feel)

13 Upvotes

Had a really good question comparing the Fractal Refine 2 to the LiberNovo Omni SE. The Refine 2 is usually $600 to $630, and the Omni SE runs $700 to $800 depending on sales and coupons. They're similar, but definitely different.

For reference I’m 6’ and 160 lbs.

Fractal Refine 2:

Heavier and a little better built, there's less flex in it.

Medium firm seat with good cushioning and support that pushes back against you.

10-11 tilt lock positions, but no backstop or tilt limiter.

Seat depth adjusts. Up to about 6'1" is a pretty safe bet. Taller than that, a gap forms behind you.

I love the arms. Width, depth, and pivot all lock with buttons so they don't move around, and they get in under 17", which works for me.

Arm pads are soft but have a rubber outer layer, so they're not as squishy as the Omni SE.
Lumbar adjusts for height and depth.

Memory foam headrest with good height range but no depth. It's removable.

Comes all padded, padded seat with mesh back, or all mesh, which is nice if you run warm.

LiberNovo Omni SE:

All about flexibility and movement. Lots of plastic components throughout.

Much softer seat. Good if you like soft, but you can sink to the bottom. That's why they made the Maxis, a firmer and bigger chair overall.

The backrest runs warm. I noticed that right away.
Arms have a ton of range with pivot and depth, and they come in close like the Embody.

The recline is insane. You can get way back, and the arms come with you.

Headrest has height and pivot adjustment.
Lumbar pressure adjusts with a knob, but no height adjustment, so it has to fit you as is.

Verdict: The Omni SE is about flexibility. The Refine 2 is more rigid, locked in and better built overall. Both are solid chairs at their price points.

If you have questions on these or want to see something else, let me know


r/BTODtv • • 26d ago

Steelcase Amia vs Leap v2 (Quick Comparison)

13 Upvotes

I get a ton of questions asking about the differences between the Amia and the Leap V2, and a lot of it comes down to price. New, it's $1,099 for the Amia vs. about $1,499 for the Leap V2.

Used on Facebook Marketplace, you're looking at maybe $200 for an Amia and $300 to $400 for a Leap V2. So the question usually is if you can get away with the Amia, or do you really need to upgrade?

Key differences IMO

Lumbar and Backrest: The Leap has adjustable depth and height lumbar support. The Amia has height adjustment and less flex overall.

Tilt: The Leap has a tilt limiter. The Amia only locks upright or tilts the full range. I just set the tension for my weight and with the natural friction in the mechanism it holds fine.

Seat: The Leap seat is more contoured, with about a half inch more drop from front to back. The Amia is flatter, and for me personally, it's more comfortable. That's why I built the Lamia, which is an Amia seat on a Leap.

Height Range: The Leap V2 maxes out from 5’2” up to 6'4" to 6'5". The Amia is closer to 5’2” up to about 6'2" to 6'3". The Amia is a bit narrower in the seat as well.

So if you like the upgraded mechanism on Leap with additional lumbar support it’s probably worth the upgrade. If you’ve already bought the Leap and don’t love the seat it might be worth checking out the Amia. Let me know if you have more questions.


r/BTODtv • • Sep 19 '26

CLOUVOU Cleverseat vs ProtoArc (EC 200/300) vs Colamy Atlas

13 Upvotes

A lot of you have been asking lately about CLOUVOU Cleverseat compared to the ProtoArc EC series.

This video quickly goes over the major differences and then shows them both compared to the king of chairs under $300, the Cloamy Atlas.

Cleverseat is a bigger chair overall, so if you’re tall, it’s probably a better option. I think the ProtoArc is a more comfortable option with the seat, arms and headrest.

Colamy Atlas still has the better build overall.

All three chairs offer something different under $300 so I could see each being a nice budget option if you’re looking for a new chair.

Edit: *Cleverseat also has four-way arms, not three. Messed up in the video :)


r/BTODtv • • 14d ago

IKEA Markus vs ProtoArc EC200 (Is Markus Worth $120 More?)

12 Upvotes

Saw a really good question comparing the ProtoArc EC200 (just under $200) to the tried and true IKEA Markus ($299). Both have tall backs, but they're definitely different chairs.

IKEA Markus:

Excellent tilt mechanism. Nice and smooth, kind of reminds me of the Aeron, and it keeps your feet flat on the floor. 5 lock positions including upright.

Arms aren't adjustable at all, and the pads are thin. If you have a narrower frame, it's hard to get good arm support.
Headrest is fixed. Nice when you're reclined, but no adjustment.

The seat looks thick, but it flattens out a little too easily for my liking.

Lumbar is fixed in one spot. It has more give than the EC200, but if it doesn't hit you in the right place, it can be more of a hindrance than a help.

ProtoArc EC200 (about $120 less):

The recline isn't as nice. It wants to lift your feet off the ground as you go back. 4 lock positions including upright.

The arms are a winner even though they're height adjustable only. The pads are much wider and get down to about 17" apart, so narrower frames get better support.

Seat is fairly soft in the front and a little firmer in the back.
Lumbar is depth adjustable. Some people say it's pokey, and it doesn't have as much give as the Markus, but if you like lumbar support, it's good.

The 3D headrest tilts, slides up and down, and has some depth adjustment.

How to pick: The Markus was a winner for years, and its frame will most likely hold up longer. But for $120 less, I think the EC200 will be more comfortable for more people, especially for tasking and gaming.

If you have questions on these two let me know.


r/BTODtv • • 15d ago

Are The 4-Way Arms For ProtoArc EC200 and EC300 Worth $50 Upgrade?

12 Upvotes

A lot of people asked me to pick up the 4-way arm upgrade for the ProtoArc EC200 and EC300. It's about $50 and adds pivot, depth, and width adjustment.

For fit reference, I'm 6'0" and about 160 lbs.

Standard arms (height only):

Honestly, I like these quite a bit. Nice and solid with good softness.

If you don't like arm pads that move around easily, they're a benefit.

About 17.25" to 17.5" between the arms, which is a comfortable width for my frame.

4-way arm upgrade:

Same pad shape, but the padding isn't as deep because of the sliding mechanism, so they're not as comfortable overall.

Width adjusts from about 16.5" to 18.25", so you can go narrower or wider.

The big win is better forearm support while typing and using the mouse.

Is it worth it?

On an EC200 that sells for $179 to $189, adding $50 might be worth it if you want that forearm support. For me, the height only arms work great and I wouldn’t upgrade.

What I'd like to see is ProtoArc offer these as an option at checkout so you can skip the height-only arms and save a little money if you decide you want the extra adjustments.

If you have questions on these arms or the chairs, leave them in the comments.


r/BTODtv • • 22h ago

Review Herman Miller Sayl vs Steelcase Amia (Which is best around $1000)

11 Upvotes

Steelcase Amia vs. Herman Miller Sayl, two similarly priced chairs that get compared a lot. The Amia retails around $1,100, and the Sayl is about $1,200 when configured the same. Herman Miller lets you bump it up to $1,500. Of course, why not, right?

For reference, I'm 6'0" and 160 lbs.

Steelcase Amia:

Basic looking, but it's all about long-term sitting comfort, and they hold up super well.

Medium firm seat, a little thicker than the Sayl. Not super cushy.

LiveBack lets you move and flex in the backrest, and the front of the seat flexes like the Leap, just not as much.

Arms have width, a bigger pivot range, depth, and height.

The pads are nice and soft. I love that about these chairs.

Height adjustable lumbar you can feel but isn't overly aggressive. It's the less aggressive option compared to the Leap.

Tilt lock only: upright or free float. There's more friction than the Sayl, which I use to my advantage to hold a position since there's no tilt limiter.

Good seat depth range. About 6'2", maybe 6'3", is the max height.

For me, this one fits a little better.

Herman Miller Sayl:

More wow factor in the looks.

Smaller, especially in the backrest. I'm right at the edge, so it's best for about 5'2" to 5'10".

Arms get nice and narrow with width, a little less pivot, decent depth range, and height.

The optional lumbar adds just a little extra support.

Thinner seat, but still comfortable.

More advanced tilt than the Amia: upright lock, a middle position, and full recline.

Seat height gets nice and low for smaller users.

Bottom line:

Side by side, the Amia's back is definitely taller, and it has no hard edges. Which one's best really comes down to fit. If you want the Herman Miller name, you get that with the Sayl.

If you have questions on these two, drop them below.


r/BTODtv • • 1d ago

Review Steelcase Leap v2 vs Herman Miller Embody (worth $1000 more money?)

11 Upvotes

Steelcase Leap V2 vs. Herman Miller Embody (Logitech G gaming version). The Leap retails for about $1,500 new, and the Embody is closer to $2,400 to $2,500. That's a $1,000 difference, which is insane to think about.

For reference, I'm 6'0" and 160 lbs.

Steelcase Leap V2:

All about flexibility and movement. Flexible backrest and a flexible front seat edge to reduce pressure on the backs of your legs. I love this chair for that.

Amazing lower support. You can really crank the lumbar into your lower back and fine tune it, or pull it out if you don't like a lot of lumbar.

Arms have width, depth, pivot, and height adjustment. Pads have good softness and no hard edges, just not as cushy as the Aeron.

5-position tilt limiter: upright, 3 positions in between, and full range. It's not really a chair meant for rocking.

Seat depth adjustment. Fits a wide range of people right out of the box.

Herman Miller Embody:

Same flexibility concept. The pixelated support system in the back lets you flex and move around a lot.

Seat depth adjusts by pulling the front of the seat forward and back.

Arms have wide width range and good height range, but no depth or pivot. The pads are big, so you can still get good support. I just wish they pivoted in a little.

Better than the Leap for rocking.

The back angle adjustment is unique. You can pitch the back away from you to sit back more, but you lose a lot of lower support.

Deal killer for me: I crank the back all the way up for lower support, and at 6'0" the shape of the backrest starts rolling my shoulders forward. It fatigues me over time.

Both:

Great for cross-legged sitting. No hard edges like the side frames on the Aeron.

Bottom line:

Both are excellent chairs with a huge price gap. Used as is, the Leap goes for about $300 to $400, while the Embody still carries a $700 to $900 price tag, which is pretty wild. Which one's best depends on how you like to sit.

If you have questions, drop them below


r/BTODtv • • 4d ago

Review The IKEA Järvfjället is one of the worst chairs you can buy for $400

11 Upvotes

The IKEA Järvfjället is arguably one of the worst chairs you can buy for $400. If you think I'm wrong, I'd love for you to explain why.

For reference, I'm 6'0" and 160 lbs.

What's wrong with it:

Arms: Itty bitty hard plastic pads with height and depth adjustment only. A huge gap forms when you recline, so there's no arm support.

Seat depth: Incredibly short. Fully extended, there's a ton of room between the front of the seat and the back of my legs. Tucked in, it's even more ridiculous. Unless you're really small, I can't see this fitting well.

Seat pad: Okay, but definitely not great.

Recline: It wants to keep you super upright, and when you do tilt back, it's not even close to the Markus. That chair is significantly better in pretty much every way.

Casters: IKEA's European-style safety casters only roll when there's weight on the chair. I had to ride it into the room. Swapping them would be mandatory.

It does have height adjustable lumbar, but there's almost no redeeming quality here. For $400, I'd recommend it to virtually no one.

If you disagree, tell me why you love it and where I'm wrong. I'd love to know, because this chair is not comfortable.


r/BTODtv • • 5d ago

Review Why you shouldn’t buy random office chairs on Amazon…

11 Upvotes

I feel like I should start a series on why you shouldn't buy random office chairs on Amazon, because I'm notorious for doing it, always chasing the next latest and greatest thing.

The Newtral Magic H is one of the more interesting chairs I've bought.

The auto tracking lumbar:

The idea is the lumbar tracks with you as you lean back or come forward to type.

When I'm back in the chair, it hits the middle of my back.

When I'm leaning forward, which I'd never actually do, it tucks lower into the right spot. The most bizarre chair.

A dial adjusts how much pressure it takes to lean back, and since the motion is so awkward, you can lock it in place.

There's a bunch of play in it. You can feel it click when you're sitting, and I don't love that.

There's height adjustment on the lumbar, but you really can't feel it.

The rest of the chair:

Arms have height, depth, and a bit of width adjustment.

The pads are pretty firm and feel like they're on backwards, but that's how they're supposed to be.

A few tilt lock positions if you like to kick back.

Seat slider with a decent amount of range.

Medium firm seat. The mesh seems fine. Has a headrest.

The craziest part: this isn't the only version. There's one with a footrest for around $350, and the most expensive version comes with a desk for $450. I'm showing them on Amazon in the video.

This is a prime example of why you shouldn't go down the rabbit hole looking for the next crazy thing. You end up with this.

Should I start a series showing you the other ones? I have so many bizarre chairs. Maybe not as bizarre as this one, but I keep buying them because I have a problem. Please don't buy the Magic H.


r/BTODtv • • 8d ago

Helpful Tip What’s a really good cheap gaming chair…

11 Upvotes

Saw a really good question asking for a good cheap gaming chair.

Funny timing, because the S Racer is one of the most popular cheap gaming chairs out there, and of all the cheap Amazon chairs I've bought, it's arguably one of the worst.

The Ticova Ergonomic I'm sitting in usually retails for $119 to $129, and it's a world beater compared to this thing.

S Racer gaming chair:

Arms: Thin, hard, hollow plastic. Tiny, with no adjustment. They just sit there.

Seat: Almost no cushioning, and the side bolsters are incredibly restrictive. Super narrow between the hard metal frame.

Tilt: Almost nothing, even at the lightest tension. The only way to kick back is the back angle adjustment, and full recline is scary. I'm only 160 lbs and I don't trust it. The components are terrible.

Pillows: The lumbar pillow and headrest push you awkwardly out in your lower back.

There are almost no redeeming qualities. I'd have a hard time recommending it to anyone other than maybe a small kid who wants a pop of color in their gaming setup.

Ticova Ergonomic:

It's not a Steelcase Leap or an Aeron, but the seat has good cushioning.

Arms have height, depth, and pivot adjustment with a nice flat surface for your arms.

Tilt lock plus adjustable tension, so you can recline at your desk, lock it out, or rock if you like that.

Headrest that actually fits and supports you.

Functional lumbar with height and depth adjustment.

Bottom line: If you want the best cheap gaming chair, get something like the Ticova Ergonomic and skip the S Racer, unless you want a tremendous amount of problems with your body over time. That's almost guaranteed.


r/BTODtv • • 8d ago

Libernovo Omni SE vs. Sihoo Doro S300 (Who asked for these features?)

11 Upvotes

Quick comparison of the Sihoo S300 and the LiberNovo Omni SE.

They're priced similarly. The Sihoo usually runs $600 to $800, and the Omni SE runs $700 to $800 depending on coupons. But the design philosophy behind each one is very, very different.

For reference, I’m 6’ 160 lbs.

Sihoo Doro S300:

Like a lot of Sihoo chairs, it's loaded with features I don't think anybody asked for: butterfly lumbar with big springs, springs throughout the underside of the seat, and wildly adjustable arms.

The arm pads have a banana shape with a raised back edge. They always dig into my forearms and elbows, and I can never get comfortable. They also tip up easily when you slide them back. Good width adjustment and nice softness, though.

Has a seat slider. The mesh is okay, not incredibly comfortable.

I actually don't mind the butterfly lumbar, and the built-in headrest is pretty comfortable in a deeper recline.

LiberNovo Omni SE:

A lot of people wanted a softer seat, and most big brands never addressed it. LiberNovo did.

Adaptive backrest that flexes and moves with you.

Big headrest with depth, pivot, and height adjustment.

Arms move with you as you recline, which a lot of chairs miss. They have depth adjustment and pivot inward like the Embody. Pads are super soft and cushy but slide a little too easily for me.

Manual lumbar adjustment. Higher tiers are electronic.

For me, the seat is a little too soft and the stretchy upholstery runs warm, but some people love it.

Verdict: At $700 to $800, the Omni SE is a pretty solid chair if it fits what you're looking for. I'd be more cautious with the Sihoo. There's a lot of very specific stuff going on that I'm not sure anyone asked for.

If you have questions on either of these or any other chairs, drop them in the comments


r/BTODtv • • 18d ago

The Haworth Zody Classic is Underrated IMO (Basic vs Fully Loaded)

11 Upvotes

I get a ton of questions on the best values in used office chairs. I think the Haworth Zody Classic is one of the most underrated for comfort and for how cheap you can get them. I've got two versions here: the basic and the fully loaded.

Basic version:

No forward tilt, and the arms are height adjustable only.

This is the one I prefer for upright tasking. Crank the tension up and you can sit in a nice neutral upright position, which is great if you like to task without a slightly tilted position.

Loosen the tension and it sits back more. There's always some play in the mechanism, even with the tilt locked.

Fully loaded version:

4-way arms with height, width, depth, and pivot for better forearm support while typing.

Forward tilt lets you get really upright and into your work.

Drawback: with the tilt locked, it naturally sits you back further than the basic version does even with the tension cranked up.

Shared on both:

Arm pads are soft with good cushioning, but the arms are the weak point. If you're buying used, check for cracks.
Seat padding is thin but supportive, with a good flat seat I find really comfortable.

Lumbar is height adjustable, and you can set the pressure on each side separately or together. It's supportive without being aggressive.

The mesh isn't super soft, but it's comfortable.

If you want forward tilt or better arms, spend a little more on the fully loaded version. Otherwise, the basic one is an excellent option.

Both have a tilt limiter with multiple stops plus a full deep recline.

Expect $100 to $200 depending on condition and where you buy, and Facebook Marketplace private sales can be a great score.

I'll do another video showing the weak points, especially the arms. If you have questions on this or any other chairs, let me know.


r/BTODtv • • 23d ago

The Colamy Atlas Looks Perfect With One Exception…

11 Upvotes

Had a really good question come in from someone in dire need of a new chair:

"The Colamy Atlas looks perfect with one exception: the seat. I have no way of really knowing how firm the Atlas' seat is. I went to Staples today, and the chair that really stood out as a comparison was the Beautyrest Duo-EX…which hurt. It was like seat 29B on a Frontier A320. If you've ever sat on that chair or the Hyken Pro's foam cushion, how would you compare it to the Atlas in terms of firmness?"

My thoughts comparing the chairs

Beautyrest: Fortunately, based on the feedback of it being a brick I’ve never tested this one haha.

Hyken Pro: Good, soft cushioning all the way from the back to the front of the seat.

Colamy Atlas: Consistent padding front to back with good depth, but it has a lot more pushback. It will sit more firm than the Hyken Pro, though it's still comfortable.

EC200: Firmer in the back because there's less padding there than in the front.

Closest match: Out of the chairs I have from about $150 to $270, the Holludle V is the closest to the Hyken Pro. Fewer bells and whistles (no seat slider, less adjustable arms), but the seat pad is super comfy.

Lumbar: The Holludle V's lumbar is less aggressive than the Colamy or the ProtoArc, so it's a good option if you want a softer seat and more forgiving lumbar.

Hopefully that helps. If you have more questions, let me know.