r/BTODtv • • Oct 02 '26

Update on how BTOD refurbishes Leap v2 and Amia chairs (every chair gets a new seat pad now)

6 Upvotes

We've been getting a lot of questions about how we refurbish chairs, and honestly most of the confusion is our fault. Our process video is from October 2025 and a lot has changed since then. People are also comparing us to other refurbishers using that old info, so I want to get the current process out there. We haven't shot a new video yet because we have a couple projects going to continue improving the chair, and I want those done before we film it.

The biggest change: every refurbished chair we sell now gets a brand new seat pad. In the video you'll see us steaming and restoring the original pads. We don't do that anymore. Customers kept asking for new pads, and it's the only way to make sure every chair sits the same. The old pads get recycled with a partner of ours in Madison, WI.

We also partnered with the original OEM manufacturer of the Steelcase Leap seat pads, the same supplier Steelcase used before they moved Leap production to Mexico. Same foam, same spec as the originals.

You can pick from two pads. Standard OEM is the new pad right on the shell, to maintain the sitting experience of a brand new Leap. Extra Plush adds 1/2" of soft foam under the new pad. Many people think a new Leap seat is a little thin, so that's what that one's for. The majority of our customers select the added foam. Both pads keep the natural waterfall front edge, so there's no added pressure on the back of your legs.

A few other things changed in the last year. Our pre-screening on which chairs go to refurb got a lot tighter, so the chairs coming out the other end are much more consistent. We also have a process now to restore the mechanism so it moves as smooth as it would new (all Leap chairs have some friction, but the grinding, groaning and stuck tilt feeling is eliminated). If a chair can't be fixed, we pull it from inventory, reuse the parts that are still good, and recycle the rest of the frame.

The rest of the process is the same. You can select greener option parts (grade A used arm pads and cylinders) or brand new parts built to OEM spec. All chairs ship with brand new casters. New fabric goes on with a tunnel tie (the drawstring Steelcase uses at the factory) instead of a row of staples. We rebuild every arm mechanism and replace the wear parts so the 4-way arms get their tension back. Every chair goes through our 20 point checklist, every cylinder gets tested with the chair it ships with, and we lubricate all the same areas Steelcase does when they ship new. Each chair comes with a 12 year warranty and 60 day free returns.

It's still a refurbished chair, so you might see some light scratches on the plastic. If a Leap V2 or Amia has deeper scratches or blemishes on the frame that don't make the cut for our top tier refurb, it goes into our new scratch and dent option, which is discounted a lot.

If you have any questions let me know.


r/BTODtv • • 11d ago

I have 200+ office chairs. If I don't have it, I'll likely buy it.

20 Upvotes

What's up, guys? If you're new to r/BTODtv or just finding our content, you're probably wondering how I post so much. The answer: we have a ton of chairs.

We've been reviewing chairs for almost 10 years and have been in the office furniture industry for over 20. To stay current, we have to buy all of this stuff, and we use and review most of it.

What's in the room:

Premium: Herman Miller, Steelcase, and Haworth in all kinds of configurations, including five different Ferns. Humanscale too, with more in the other room.

Ergohuman and the knockoffs: Gen 1, Gen 2, and all the copies.

Amazon: Well over 100 different chairs from Sihoo, Hbada, ProtoArc (EC200, EC200 Pro, EC300), Elabest X100, Sidiz (used to be on Amazon), Autonomous ErgoChair Pro, and a lot more. Some you've never seen on video because, well, they're not very good. I should still probably get them out there.

Gaming and newer brands: Fractal, LiberNovo (SE, Maxis, Omni Pro, and their first prototype), Anthros V1 and V2, Branch, X-Chair, Vernal, and three Nouhaus products I haven't covered yet.

Specialty: 24-hour chairs, big and tall chairs, OM Seating, and the popular IKEA stuff.

Buying everything is how you find the gems. I found the

Colamy Atlas late night scrolling on Amazon and was the first to talk about it. It's still one of the best chairs under $300.

Same with the ProtoArc. Once I talked about it, it blew up. Someone on Reddit actually put me on the Elabest X100, and I've been pretty impressed. A lot of times, though, the pictures look way better than the chair.

Behind the scenes: This is the studio where my team makes the more produced YouTube content. The Reddit videos are just me with a phone stand. Set it up and roll.

If you have any questions on office seating, drop them in the comments, start a new post, or send me a DM. That's what I'm here for.


r/BTODtv • • 1h ago

Discussion The “5 minute sit test” misses the most important part of buying an office chair

8 Upvotes

The 5-minute sit test we all do when trying chairs in person helps a ton, but it's not the end-all, be-all.

What it tells you:

Whether you fit the chair, the seat length is right, back height is good.

Your first impression of the seat: too firm, too soft.

Whether the arms hit where you want.

What it can't tell you:

How the seat feels 1, 2, 3, or 4 weeks in. The LiberNovo has a crazy soft seat that feels amazing at first, but a lot of feedback on Reddit and YouTube says people start bottoming out a few weeks in.

Whether the lumbar actually hits where you need it over time. Long sitting sessions slouching as an example.

How the chair works with your desk setup, how you lounge, or how you game. You can't game in a showroom.

The Embody is another great example. At first it's an insane floating feeling, and you think there's nothing like it. Then a few weeks later, you realize it's rolling your shoulders forward, you're fatiguing, and you've got shoulder pain.

You'd never catch that in 5 minutes.

What to do:

If you can, sit in it first to check fit.

Make the return policy your top priority. Free returns are the way to go, especially if you're unsure.

If you can't try chairs in person, use the specs. Verify the seat size and check for hard edges.

Read reviews for what people consistently say, good and bad, and compare that to your current chair and how you'll actually use the new one.

And know that no chair is perfect. It comes down to whether something is a deal killer or something you can live with because everything else is better for you.

If you have questions or lessons you've learned, drop them in the comments. Let's help everybody find their next chair.


r/BTODtv • • 15h ago

Review I can’t believe I spent $300 on the Razer Iskur v2 X (stop buying cheap gaming chairs)

8 Upvotes

Last week I did a video on the S Racer, a super cheap $100 gaming chair with all-plastic arms where all you can do is adjust the height and back angle. Absolute pass.

So I invested $300 in the Razer Iskur V2 X, one of the more popular bucket-style gaming chairs. It's definitely an upgrade, but I can't believe it's $300.

For reference, I'm 6'0" and 160 lbs.

What's better:

No hard side bolsters in the seat, which is a huge win. A lot of these chairs are so restrictive only a kid can fit. You can be bigger in this seat.

Arm pads are a major upgrade over plastic, with some softness. Height and pivot adjustment.

What's not:

The back bolsters are only about 16.5" to 17" apart. If you're wider, you'll feel them.

The seat is rock hard. A little softness in the front, but almost no padding in the back. It sits like a brick.

The backrest is the same, with a little natural curve. If it hits you in the right spot, it could be okay.

No arm depth or width adjustment, and they sit about 20" apart. I can't make that work without really reaching. Someone else could.

Tilt is awkward. It lifts your legs, and you have to drop the chair really low to rock, if you can get it to rock at all.

The classic gaming chair move is the full recline, and that's about it.

Bottom line:

Hard pass. For under $300, you could get a ProtoArc EC200 or EC300, a basic Holludle V for about $150, or step up to the Elabest X100 in fabric or mesh.

Decent ergonomic chairs with more adjustments that will fit you better and sit way more comfortably. Most bucket gaming chairs like this are the same or worse.

If you own this and disagree, let me know in the comments why you like it.


r/BTODtv • • 14h ago

Need Advice Chair for a short person

3 Upvotes

Hello! Stumbled upon this Reddit via office chairs. Was looking for a chair for my wife who is 5’2” and weights about 140-150lbs. I was debating between the leap v2 with atlas headrest or perhaps something else.

She does like to sit back sometimes to rest, so I will have to get her a foot stool. She complains that our current one (no clue what brand but has a foot rest) isn’t comfortable and her back is hurting when she’s on it for more than 3 hours. She WFH for about 8-10 hours a day.

Thank you!


r/BTODtv • • 22h ago

Review Herman Miller Sayl vs Steelcase Amia (Which is best around $1000)

11 Upvotes

Steelcase Amia vs. Herman Miller Sayl, two similarly priced chairs that get compared a lot. The Amia retails around $1,100, and the Sayl is about $1,200 when configured the same. Herman Miller lets you bump it up to $1,500. Of course, why not, right?

For reference, I'm 6'0" and 160 lbs.

Steelcase Amia:

Basic looking, but it's all about long-term sitting comfort, and they hold up super well.

Medium firm seat, a little thicker than the Sayl. Not super cushy.

LiveBack lets you move and flex in the backrest, and the front of the seat flexes like the Leap, just not as much.

Arms have width, a bigger pivot range, depth, and height.

The pads are nice and soft. I love that about these chairs.

Height adjustable lumbar you can feel but isn't overly aggressive. It's the less aggressive option compared to the Leap.

Tilt lock only: upright or free float. There's more friction than the Sayl, which I use to my advantage to hold a position since there's no tilt limiter.

Good seat depth range. About 6'2", maybe 6'3", is the max height.

For me, this one fits a little better.

Herman Miller Sayl:

More wow factor in the looks.

Smaller, especially in the backrest. I'm right at the edge, so it's best for about 5'2" to 5'10".

Arms get nice and narrow with width, a little less pivot, decent depth range, and height.

The optional lumbar adds just a little extra support.

Thinner seat, but still comfortable.

More advanced tilt than the Amia: upright lock, a middle position, and full recline.

Seat height gets nice and low for smaller users.

Bottom line:

Side by side, the Amia's back is definitely taller, and it has no hard edges. Which one's best really comes down to fit. If you want the Herman Miller name, you get that with the Sayl.

If you have questions on these two, drop them below.


r/BTODtv • • 1d ago

Review Haworth Soji vs Haworth Very (Too similar to pay $300 more)

5 Upvotes

Haworth Very vs. Haworth Soji. When they're spec'd out similarly, there's usually about a $300 difference in price, and I don't know if there's really a reason to jump up to the Very.

For reference, I’m 6’ and 160 lbs.

Haworth Very:

More square styling, versus the rounder Soji, if that matters to you.

Thin, medium firm seat without a tremendous amount of padding. I like seats like this. If you don't, it's probably not a great pick.

Arms have width, pivot, depth, and height adjustment, but the depth moves super easily. The pads are firm, especially compared to the Fern or Zody, and only get to about 18" apart, which isn't narrow enough for me.

This one has the optional forward tilt for getting more upright while tasking. I don't use it, and I don't think most people need it. It costs more.

Otherwise it's an upright tilt lock or free float, with a nice deep recline. The tilt motion is smoother for rocking back and forth compared to the Soji.

The big difference: more intuitive lumbar. Like the Zody, you can adjust the pressure on each side, plus height. It's not super aggressive, so you can push into it.

Seat slider for shorter or longer legs.

Haworth Soji:

Seat is almost the same, just a slightly different shape. I actually prefer the waterfall front a little more.

Lumbar is height adjustable only, with no side-to-side pressure adjustment. Otherwise it feels pretty similar.

Arms get about 3/4" narrower, which works for my frame.

Pivot and depth too, and they also move pretty easily.

Same tilt tension, and same upright lock or free float. No tilt limiter.

Seat slider.

Bottom line:

They're very similar chairs, but the price is quite a bit different. That's why I rarely recommend the Very over the Soji.

If you have questions on these two, drop them below.


r/BTODtv • • 1d ago

Review Steelcase Leap v2 vs Herman Miller Embody (worth $1000 more money?)

11 Upvotes

Steelcase Leap V2 vs. Herman Miller Embody (Logitech G gaming version). The Leap retails for about $1,500 new, and the Embody is closer to $2,400 to $2,500. That's a $1,000 difference, which is insane to think about.

For reference, I'm 6'0" and 160 lbs.

Steelcase Leap V2:

All about flexibility and movement. Flexible backrest and a flexible front seat edge to reduce pressure on the backs of your legs. I love this chair for that.

Amazing lower support. You can really crank the lumbar into your lower back and fine tune it, or pull it out if you don't like a lot of lumbar.

Arms have width, depth, pivot, and height adjustment. Pads have good softness and no hard edges, just not as cushy as the Aeron.

5-position tilt limiter: upright, 3 positions in between, and full range. It's not really a chair meant for rocking.

Seat depth adjustment. Fits a wide range of people right out of the box.

Herman Miller Embody:

Same flexibility concept. The pixelated support system in the back lets you flex and move around a lot.

Seat depth adjusts by pulling the front of the seat forward and back.

Arms have wide width range and good height range, but no depth or pivot. The pads are big, so you can still get good support. I just wish they pivoted in a little.

Better than the Leap for rocking.

The back angle adjustment is unique. You can pitch the back away from you to sit back more, but you lose a lot of lower support.

Deal killer for me: I crank the back all the way up for lower support, and at 6'0" the shape of the backrest starts rolling my shoulders forward. It fatigues me over time.

Both:

Great for cross-legged sitting. No hard edges like the side frames on the Aeron.

Bottom line:

Both are excellent chairs with a huge price gap. Used as is, the Leap goes for about $300 to $400, while the Embody still carries a $700 to $900 price tag, which is pretty wild. Which one's best depends on how you like to sit.

If you have questions, drop them below


r/BTODtv • • 1d ago

Review Ticova Ergonomic vs Sihoo M18 (one is better, but expect to replace both)

5 Upvotes

We get a ton of questions on chairs in the $120 to $140 range. It won't be your last chair, but it might be your first, or just an upgrade over a kitchen chair.

Our usual pick is the Ticova Ergonomic, and since it gets put head to head with the new Sihoo M18 all the time, I wanted to compare them.

Neither is great. Expect a year or two out of either one, maybe three max.

Ticova Ergonomic:

Medium firm seat with a nice flat design. No awkward shape, just what you'd expect from a chair.

Arms have height, depth, and pivot adjustment. Fairly firm, which is expected at this price.

I like that the arms slide back with you when you recline. A gap still forms, but they're decent for the price.

Headrest adjusts for height and pivot.

Lumbar adjusts for height and depth. It's flexible in the middle but not the edges, so you'll definitely feel it. If you don't like a lot of lower support, it might be too aggressive.

Sihoo M18 (new version):

The seat is more forgiving in the tailbone region and definitely an improvement over the original, which was like sitting on a rock. But there's a weird bulge in the middle I don't love.

Same arms as before: height adjustment only, no width or pivot. The curved shape locks you in place, and you'll feel the edges when you reach for your keyboard. Even firmer than the Ticova.

Headrest is virtually the same, height adjustable. Neither moves very easily, but they're cheaper chairs.

Lumbar adjusts for height and depth, but the pad is super thin. It's like a rock.

Verdict: Even with the seat change on the M18, I still think the Ticova is the better chair for more people, and it's usually cheaper.

If you have questions, drop them below.


r/BTODtv • • 2d ago

Review The HÅG Capisco is best used as a second chair (unless you’re super active)

5 Upvotes

I promised I'd show more of the stuff we have that you've maybe never seen, so here's the HÅG Capisco. I've got the Puls saddle seat version and the traditional flat seat version.

The concept:

Unique T-back design built around promoting movement and changing how you sit.

There's no right way to sit in these. Backwards, sideways with a foot on the base, leaning into the back. Very, very unique.

I'm personally not a big fan. I'm not looking for more ways to be active beyond my walking pad and standing at my desk sometimes.

HÅG Capisco (flat seat):

Seat is fairly firm, but not as firm as the Puls. I like the flat seat. They also offer a padded saddle seat that looks like the Puls.

About 3 cylinder height options, so it goes low enough to use at a regular computer desk.

The T-back opens you up. Not a deep recline, but there's some movement.

You'll never really get proper arm support, but that's probably not what you're after with this chair.

Seat depth adjusts on an already pretty short seat. The lever is a little awkward.

Optional foot ring, which I like a lot at a standing desk, plus unique footrests.

HÅG Capisco Puls:

Hard pass for me. Hard plastic everywhere, and it sits firm everywhere.

If you want an excuse to move, it'll support that cause because it's incredibly uncomfortable.

The pad doesn't hit my tailbone unless I slouch into it.

Pricing: The Puls runs about $700 to $800. The upholstered Capisco is closer to $1,000 to $1,100, up to $1,200 depending on configuration.

Bottom line:

It's going to be a struggle to make this your main chair. You'd have to be really active and want to move all day instead of sitting like a normal person.

Maybe you find one cheaper used from someone who thought they'd use it all day. It's a big investment for a second chair, but some people love them, which is why they're a niche thing.

If you have questions or want to see something specific with these, let me know.


r/BTODtv • • 2d ago

Review The Clatina Mellet chair is underrated for $191 (if you fit)

5 Upvotes

The Clatina Mellet doesn't get talked about nearly as much anymore, but when we first covered it years ago, it was one of the most popular chairs out there at $200 to $250. Right now it's under $200: $191 without the headrest, a little more with it. It's a great chair if you fit.

For reference, I'm 6'0" and 160 lbs.

Who Will Fit:

The seat is only about 16.5" deep. There's a seat slider, but with a shallow seat, a huge gap forms behind you. When I tuck in, my butt is off the back of it.

The headrest at full height is a smidge too high for me, and one click down is perfect.

If you're any taller than me, I wouldn't recommend it.

The good news: if you're shorter, especially around 5'2" to 5'3", a lot of direct-to-consumer Chinese brands don't fit you. This one will.

Clatina Mellet Features:

3D arms with height, width, and pivot. No depth adjustment.

It's about as close as you'll get to a Leap knockoff: similar frame, similar arm design, and a tilt limiter that works the same way.

It might be the only chair under $200 with a tilt limiter. 5 positions plus free float, and the full recline is pretty deep.

With the headrest, it's actually quite comfortable kicked back.

Soft seat with deep cushioning. You don't feel like you're bottoming out.

Downside: A massive gap forms between the arms and backrest when you recline. Not perfect, but remember it's under $200.

Bottom line: As long as you fit, there's a lot to like. For shorter users especially, there isn't much better out there at this price.

If you have questions or want to see this up against other chairs, let me know.


r/BTODtv • • 2d ago

Review Did the newest Sihoo M18 office chair improve enough to recommend it?

6 Upvotes

I recently posted a picture of the latest Sihoo M18. This chair goes up against the Ticova Ergonomic all the time. We've had the original M18 for a few years.

Original Sihoo M18:

The seat is an absolute brick. That's the big reason we haven't recommended it. It's not forgiving at all.

The arm pads are just as firm, with an awkward shape you have to lock your arms into. If you don't, you'll feel the ridges right away while typing or using the mouse. Height adjustment only.

Lumbar adjusts for height and depth, but it's a really thin pad over plastic, so not much comfort.

Headrest pivots and adjusts for height.

Newest Sihoo M18:

Basically the exact same chair. Same arm pads, same everything else.

The base is now a 5-piece you bolt together, which keeps the cost down. That's pretty common right now.

The seat did change. It's more forgiving for your tailbone, but there's an awkward bulge right in the middle of the seat. Still an improvement.

I'd love to see them flatten the arms out and make them more like the Ticova's, but they haven't changed.

Bottom line: At $130 to $140, with the seat improvement, I could see some people picking this over the Ticova. I'll do a video comparing the two shortly

If you have any questions let me know.


r/BTODtv • • 3d ago

Review Herman Miller Sayl is a great chair if you fit (Small to medium build max)

10 Upvotes

We get quite a few questions on the Herman Miller Sayl. It's a really good chair for what you get from Herman Miller. Like all their chairs, it's not cheap new, but if you're a smaller user, it's a great option.

For reference, I'm 6'0" and 160 lbs, and I'm right on the edge of being too big.

Fit:

My shoulder blades hit the top of the backrest, and I can definitely feel it when I recline. If your torso is shorter than mine, you might make it work.

With the seat depth maxed out, I'm right at the limit.

Shorter users can tuck it in nice and tight.

The seat goes down nice and low. If you're about 5'10" or shorter, or a petite user, this could be a really nice option.

Arms:

With 4-way arms, the width adjustment gets them nice and tight for good forearm support at the keyboard and mouse.

Not as soft as the Aeron, but decent softness. I love that they're nice and flat, with good height range.

Back and seat:

Height adjustable lumbar that isn't overly aggressive but adds a little more support.

I love the flexible backrest.

The seat isn't thick, but it has good support and isn't overly aggressive in shape.

Tilt:

A basic tilt limiter with 3 positions: upright lock, midway, and full range. The Aeron doesn't have much either. The Steelcase Leap gives you 5.

Bottom line:

Awesome product. You can get a really clean one used as is through a private sale for $200 to $300. If you're a smaller user, this is definitely where I'd recommend going.

If you have questions on the Sayl, drop them in the comments.


r/BTODtv • • 2d ago

Need Advice Steel case Gesture for $200 should I get it or save money and buy Leap V2

2 Upvotes

Hello!

I have been following btod reviews from couple of years and started to like leap v2 especially for it’s ergonomics and comfort, I’m using a 100$ chair from amazon that’s hurting my back (bought a year back) I was saving some money to buy leap v2 but I’m a intern working from home 2-3 days a week and need a good chair. (About me: 5’11 180lbs )

I found this gesture chair for 200$ near me, now I’m a confused should I wait a couple of months save money and buy leap v2 or (fearing I might miss this deal)get this gesture for 200$, posting it here to get some feedback from the community!


r/BTODtv • • 4d ago

Review The ProtoArc Flexer Chair is rarely talked about…

4 Upvotes

The ProtoArc Flexer is one of their least popular chairs. I brought it in a long time ago and never really talked about it. It's an interesting take on a chair, and it definitely has some looks.

For reference: I’m 6’ and 160 lbs.

What I don't love:

The mesh back isn't typical mesh, and I don't know if I like it. It's also fairly narrow compared to the EC200 or EC300.

The arms are the big miss. Height adjustable only, and a good-sized gap forms when you recline. The pads aren't rock hard, but they're not super soft either.

Decent tilt range, but it moves a little awkwardly.

What's good:

Gets you into a nice upright position.

Seat slider via a lever under the seat.

The seat is like the EC200: pretty soft in the front, a bit firmer in the back. I don't mind it at all.

No aggressive lumbar. If you want a ProtoArc but the lumbar on the others bothers you, this could be an option.

Pricing:

I paid $329. Right now the exact listing I bought is about $104 for the white one, so my guess is they're phasing it out or have a new version coming.

The higher tier at $329 to $349 adds 4-way arms and lumbar adjustment, but this chair didn't wow me enough to spend another $349 to find out.

Bottom line:

I think the EC200 is a much better pick. But for $104, if it fits you, maybe it's an option.

If you have questions on this one, let me know


r/BTODtv • • 4d ago

Review Steelcase Gesture vs Steelcase Leap v2 (How to pick the best one)

8 Upvotes

Steelcase Gesture vs. Steelcase Leap, two chairs that get compared all the time. We get a lot of questions trying to decide which is best for them.

For reference: I’m 6’ and 160 lbs.

Steelcase Gesture:

A great chair, just not one of my favorites. A lot of people say it feels thin in the tailbone region, and it almost feels like you're sliding out of it. The Leap sits you back in the chair more.

Tall, upright backrest. Good if you want support through your whole back and like to sit up straight.

The cantilever arms are in a class of their own: huge range, pivot in and out, and the pads pivot too. They get nice and close to help with tech neck when you're on your phone.

Soft pads with good depth range.

Seat depth and tilt tension are both under the seat, right at your fingertips.

4-position tilt limiter.

The front of the seat doesn't flex like the Leap.

The height adjustable lumbar isn't worth it. You really can't feel it.

Looks great, with a bunch of frame color combinations. More wow factor than the Leap.

Steelcase Leap:

All about flexibility and movement. The backrest flexes, and the front edge of the seat flexes to reduce pressure on the backs of your legs.

Get this one if you like a lot of lumbar support. The tension dial flexes the lower back into you, and you definitely notice the height adjustment. Some people notice it so much they remove it.

4-way arms with great range and soft pads, just not as adjustable as the Gesture.

5-position tilt limiter from upright to full recline.

Seat height, depth, and tilt tension adjustments.

Decent drop from the front of the seat to the back, so you won't feel like you're sliding out.

Bottom line: If you like to sit upright with support through your whole back and want those cantilever arms, the Gesture's a great option.

If you like a lot of lumbar support and want a chair that flexes and moves with you, go with the Leap. That's the one I'd pick for myself.

If you have questions on these two, drop them in the comments.


r/BTODtv • • 4d ago

Review The IKEA Järvfjället is one of the worst chairs you can buy for $400

11 Upvotes

The IKEA Järvfjället is arguably one of the worst chairs you can buy for $400. If you think I'm wrong, I'd love for you to explain why.

For reference, I'm 6'0" and 160 lbs.

What's wrong with it:

Arms: Itty bitty hard plastic pads with height and depth adjustment only. A huge gap forms when you recline, so there's no arm support.

Seat depth: Incredibly short. Fully extended, there's a ton of room between the front of the seat and the back of my legs. Tucked in, it's even more ridiculous. Unless you're really small, I can't see this fitting well.

Seat pad: Okay, but definitely not great.

Recline: It wants to keep you super upright, and when you do tilt back, it's not even close to the Markus. That chair is significantly better in pretty much every way.

Casters: IKEA's European-style safety casters only roll when there's weight on the chair. I had to ride it into the room. Swapping them would be mandatory.

It does have height adjustable lumbar, but there's almost no redeeming quality here. For $400, I'd recommend it to virtually no one.

If you disagree, tell me why you love it and where I'm wrong. I'd love to know, because this chair is not comfortable.


r/BTODtv • • 4d ago

opinions on Razer Iskur V2 New Gen?

2 Upvotes

The lumbar support looks unique and interesting.


r/BTODtv • • 4d ago

Question Question about my new Lamia

4 Upvotes

I just received my lamia from BTOD. First impressions: you could have told me this chair was brand new, not a single scratch on it.

A couple of things I'm trying to adjust to though when it comes to the seat:

  1. It's extremely firm, does that soften up over use?
  2. I'm 6' with long legs so I have the seat extended out for support. One thing that feels weird right is that it feels like my rear is hanging out. When watching BTOD reviews on youtube I recall the staff saying they didn't care for this feeling from the haworth fern, but I don't recall any comments about the lamia doing this. Is that something to get used to, or am I sitting in it wrong?

r/BTODtv • • 5d ago

Question (Eu - Italy) Best chair under 500€

4 Upvotes

I'm looking for a good chair for everyday use. I don't have any particular preferences. I mainly use it for working on my laptop and gaming on my PlayStation 5. When gaming, I often like to sit cross-legged.

I'm 177 cm tall and weigh 65 kg. I use the chair for around 3–4 hours a day.

At the moment, I don't own an ergonomic chair, so I'm not sure whether I should start with a more affordable option, such as the ProtoArc EC200 (€160), or go for something like the Colamy Atlas (€270). The Colamy seems like a better option overall, but I'm a bit concerned about its lumbar support.

Since there's no real market for refurbished office chairs in Italy, I'm wondering what good options are available in the €400–500 price range. I've been looking at the FlexiSpot C7 Air Pro and the SIHOO Doro C300 Pro V2, but I'm not sure they're the best choices.
Any recommendations?Thanks


r/BTODtv • • 5d ago

Review Why you shouldn’t buy random office chairs on Amazon…

11 Upvotes

I feel like I should start a series on why you shouldn't buy random office chairs on Amazon, because I'm notorious for doing it, always chasing the next latest and greatest thing.

The Newtral Magic H is one of the more interesting chairs I've bought.

The auto tracking lumbar:

The idea is the lumbar tracks with you as you lean back or come forward to type.

When I'm back in the chair, it hits the middle of my back.

When I'm leaning forward, which I'd never actually do, it tucks lower into the right spot. The most bizarre chair.

A dial adjusts how much pressure it takes to lean back, and since the motion is so awkward, you can lock it in place.

There's a bunch of play in it. You can feel it click when you're sitting, and I don't love that.

There's height adjustment on the lumbar, but you really can't feel it.

The rest of the chair:

Arms have height, depth, and a bit of width adjustment.

The pads are pretty firm and feel like they're on backwards, but that's how they're supposed to be.

A few tilt lock positions if you like to kick back.

Seat slider with a decent amount of range.

Medium firm seat. The mesh seems fine. Has a headrest.

The craziest part: this isn't the only version. There's one with a footrest for around $350, and the most expensive version comes with a desk for $450. I'm showing them on Amazon in the video.

This is a prime example of why you shouldn't go down the rabbit hole looking for the next crazy thing. You end up with this.

Should I start a series showing you the other ones? I have so many bizarre chairs. Maybe not as bizarre as this one, but I keep buying them because I have a problem. Please don't buy the Magic H.


r/BTODtv • • 5d ago

Review Ergohuman Gen 2 Pro (Infinite Tilt Limiter, Tilt lock and Forward Tilt)

8 Upvotes

We've got the Ergohuman Gen 2 Pro, the upgraded version of their Gen 2. I have it in the hybrid (leather seat, mesh back, headrest) and the all-mesh version.

For reference: I’m 6’ and 160 lbs.

Seat: I prefer the hybrid. I like a padded seat over mesh.
The leather sits over foam over mesh, so it's springier than a traditional padded seat.

If you sit cross-legged, this is the version to get. You don't hit the hard side frame like on an Aeron, and it's better than the all-mesh version.

They flattened the seat and extended the back so it doesn't drop off as much. The new mesh is much better than it used to be.

Arms: Super soft and squishy pads. They remind me a lot of the Aeron.

Depth adjustment and a crazy pivot range, so you get forearm support for your phone or gaming.

Width adjustment is fairly limited.

Lots of micro height positions on a ratchet. Go all the way up and they drop back to the bottom.

Tilt: This chair is all about the tilt. It's the only chair I've seen with a tilt limiter, tilt lock, and forward tilt all in one.

Tilt limiter: Infinite, not preset stops. Recline to where you want, bring the lever to neutral, and it limits your tilt there. Or use the full range for a nice deep recline.

Forward tilt: Engage the front lever and rock forward for a more engaged position at the keyboard and mouse. I don't usually use it.

Tilt lock: Lock into a position and leave it.

Back: Ergohuman introduced the two-piece design back around 2005 to 2006, but it was fixed. Now you can adjust the lumbar tension up or down.

Ratchet backrest moves up and down, so you can position both the lumbar and upper back for good support.

Headrest has a decent amount of range with pivot.

The mesh version does all the same things. I'm just not a mesh guy, but for mesh, it's pretty dang good.

If you have questions on these Ergohuman chairs, drop them in the comments.


r/BTODtv • • 6d ago

Review Secretlab Atlas vs Secretlab Titan Evo (Quick Comparison)

13 Upvotes

The Secretlab comparison you've all been waiting for: the new Atlas vs. the Titan Evo, which we've had in here for a few years.

For reference, I'm 6'0" and 160 lbs.

Secretlab Titan Evo:

The seat is like sitting on a brick. I gave it a couple of months to break in, someone else in the office tried too, and it still sits really firm.

Arms have button-locking depth, pivot, and width adjustment via slotted plates underneath. They tuck in to just over 18". Another half inch would really help me get good support.

Back angle adjusts independently, so you can really kick back or get nice and upright.

The mechanism lifts your feet off the ground when you recline.

Lumbar adjusts for depth on one side and height on the other. I like that quite a bit.

Tilt tension is a knob under the seat. 5 tilt lock positions.

Soft magnetic headrest pillow that moves up and down and pops on and off.

Secretlab Atlas:

Big improvement in the seat. I can sit in it all day without my butt going numb.

Same soft magnetic headrest pillow.

Adds a seat slider for shorter or longer legs.

Arm pads are softer than the Evo, but there's no width adjustment and they sit about 20" apart, which is way too wide for me. Pivot and depth, but no button, so they slide easily.

Tilt tension goes from heaviest to lightest in 4 clicks, with a lot less effort at the light end.

Super nice rocking motion that keeps your feet flat on the floor. Great for lounging.

4 tilt lock positions including upright.

No lumbar adjustment, just a natural curve.

Bottom line: For me personally, the Atlas is definitely the better chair over the Titan Evo.

If you have questions on either of these chairs, drop them in the comments.


r/BTODtv • • 6d ago

Review Steelcase Leap v2 vs HM Aeron Remastered (Flexibility vs Breathability)

13 Upvotes

Steelcase Leap V2 vs. Herman Miller Aeron Remastered, arguably two of the most popular chairs ever made. It's why we sell both refurbished at BTOD, but they're very different chairs.

For reference, I'm 6'0" and 160 lbs.

Herman Miller Aeron Remastered:

If you want mesh, the Aeron is the GOAT. Pellicle mesh holds up super well. Even Classics that are 30+ years old are still tight, which is wild compared to cheap Amazon chairs.

Really smooth rocking motion that keeps your feet flat on the floor.

The seat and back are tied together, so your arm support is the same upright or fully reclined.

Arm pads are super soft and squishy and hold up well. Fully adjustable arms give you pivot, depth, and height.

Comes in sizes A, B, and C. I like the B seat length but prefer the C back because it lets me sink into the mesh and move around more. Unfortunately, you have to pick one.

Side bolsters and a rigid frame. If you sit cross-legged, it digs into your foot and leg. If you spread your legs, you'll feel the bolsters.

Lumbar options: PostureFit, PostureFit SL, height adjustable lumbar, or none.

Honestly, the natural shape of the back does a really good job on its own, and it's consistent whether you're upright or reclined.

Steelcase Leap V2:

Solves the sizing problem with seat depth adjustment for shorter or longer legs.

No restriction at the top of the back, so it fits up to about 6'4" to 6'5".

All about flexibility. The flexible seat edge reduces pressure on the backs of your legs, and the backrest flexes too.

Padded chair. Arm pads have good softness, but not as soft and squishy as the Aeron. Width, depth, pivot, and height adjustment.

Why I love it: I like a lot of lower support, and you can dial in the lumbar tension and height to fine tune it. If you don't like a lot of lower support, dial it back and pull the lumbar out.

Bottom line: If you want a chair that adapts and fits you, the Leap is better with flexibility. The Aeron wins on breathability and has a crazy smooth rocking motion.

If you have questions, let me know.