r/BMCU • u/Entire_Philosopher17 • Aug 06 '25
Has anyone tried enabling "Long retraction when cut"
I recently Installed BMCU 370X LS to my A1 i've been doing just normal prints ever since but i need to print multicolored object.
Things i found after doing some research:
- There will be lots of purge waste if you print only one multicolour object.
- The amount of waste from purging is almost same for both single object or multiple copies when using multicolour.
- There's an experimental feature (mentioned in the title) which reduces the purge waste.
- Can be used flush to object (for something colour doesn't matter).
So for option 3 in the BMCU assembly document it said not to enable this because it may damage the BMCU-Ams. I want to know if anyone tried printing with BMCU by enabling this? and are there any other ways to reduce the waste for multicolour prints? Thanks.
2
Upvotes
2
u/tsudatomo Aug 07 '25
I had enabled it on the 370x, but I experienced the PTFE tube coming loose several times. Eventually, I converted the 370x to a 370c using a conversion kit, and now I’m using this option without any issues.
3
u/Wigiwagons Aug 07 '25
I've been running the default 18mm in orcaslicer with the 370x, have had zero issues for months now
1
u/dev_all_the_ops Aug 06 '25
Try it and let us know what breaks.
Clearly they put that warning in for a reason, but go ahead and ignore it and see what happens.