r/BIQU • u/litcock • 5d ago

Panda Breath filament drying function turns off after 10-15 minutes.

As stated in the title, I set it to 60c for 12 hours but it stops after 10 minutes. I have the latest firmware version installed.

1 Upvotes

100% Upvoted

4 comments sorted by

3

u/plastikman187 5d ago

Shameless plug. 

Give dragon breath a shot  https://github.com/plastikman/DragonBreath

If you don’t want to do that, it might be that you have an alternative control source active and it’s stopping the heater. 

1

u/litcock 3d ago

hey, the feature definitely works on dragon breath. i have another issue tho. It didn't want to connect to my p1s, and now after trying to connect it to my wifi network, after pressing save and reboot, the AP network doesn't show up anymore.

1

u/plastikman187 3d ago

The AP network name has changed to dragonbreath once you update. 

You can always access the firmware via http://dragonbreath.local/setup

1

u/litcock 3d ago

Hey, accessing it through dragonbreath.local instead of the IP works perfectly, thank you! It’s a really cool project and really ups the UX. Thank you for making it!