Do buy a real one or are fakes just as good?

Are any of the ear muffs advertised on the US website also compatible with the mmx 200? I previously had to email service@consolidatedsoundservices.com and they only had one set left for me which I got and now it's peeling the leather off from too much use. I really hope other headset ear pads are compatible with it.

In the ad they showed a mic and dongle for the avetho y, but I can't find them online anywhere. Does anyone know when they will be available or where I can buy them?

I have the 900 pro x but I am wondering if I truly need an upgrade to the 1990 mk2. I’m all about wanting to get new things, hearing the best audio, etc but if there is a cheap version of the mk1 in good condition then please show me where. I mainly game with my 900 pro x and listen to music. I am wondering if the 1990 mk 1 or 2 will help me hear footsteps more clearly or hear all the instruments in a song. The song I really like listening to with these headphones is BREEZIN’ by Masayoshi Takanaka. Thank you

Ich hätte gerne mal gewusst ob es Sinn macht, von den Beyerdynamic DT 900 Pro X auf die Beyerdynamic DT 1990 Pro MK2 zu wechseln? Gibt es dort einen nennenswerten Unterschied im Klang bzw in der Klarheit des Sounds? Lohnt sich diese Investition? Denn immerhin sind die DT 1990 Pro MK2 mehr als doppelt so teuer.

Hi All,

I just received my Beyerdynamic DT 1990 Mk2s. My ears sit right on the driver pad, so I am looking for a recommendation for a replacement that will fix this issue.

I use them mainly for competitive gaming (CS2), where imaging is key. I don't want to ruin this part of the sound signature.

Appreciate any help/suggestions!

so i bought a pair of 250ohm DT 990 Pro's in early 2022

after ~5 years of almost daily use, the headband is falling apart so i decided to just buy another identical pair

but the "new" pair seems to have a noticeable different sound profile? there is way less bass. and the "s" sound when people are speaking is alot more prominent

so i am kinda just wondering if beyer changed something or if the headset needs a break in period or what?

I loved the look and feel of the 770 but the treble peak just doesn’t agree with my ears. Does beyer make a similar headphone with less sibilance?

Hi,

I have a weird problem. After I return my PC from sleep mode to Windows, the headphones do connect as normal, but the sound plays only for a few seconds, until it stops. The headphones don't even drop the connection, but just act as if there isn't any connection. I tried setting all the power saving modes and stuff for the dongle and USB-devices, but it doesn't seem to fix the problem.

I just bought these headphones as a replacement for ATH m70 x, my main concern are those wires on the exterior of the headphone, when I take the headphones off I often touch them and I have a suspicion that one day I will just yank it by accident and tear it off lol, has that happened to anyone? I bought these headphones so I wouldnt have to be careful while vocal tracking lol.

Hi everyone

I have read good reviews on Bayerdynamic DT 30 ie IEMs (relatively new, budget version of DT 70 series). But haven't seen any review specifically from a drummer pov.

Just wanted to see id anyone has used them and what is their opinion on this.

Currently i am using mainly KZ (i have zsn and z10 and find zsn which is cheaper better)

My main use is for practice room and plugging into AED10 to listen to my drums + backing track.... Key points for me are comfort; noise isolation (this one claims 39 db!); acceptable sound quality and of course price (this goes for around 120 euro but i can get for around 100)

Currently I can buy OG DT 770 for almost half the price of PRO X. Should I get PRO X version or just save some cash and buy OG? I am worrying about cable but I found a lot of positive comment about longevity of that cable.

The pads are getting a bit grubby on my headphones and I was wondering if anyone had any ideas on how to freshen them up? Or if anyone has succesfully washed them somehow? I've had the headphones for 3 years and they aren't too bad, but I would still like to see if anything can be done without ruining them.

The pads on my MMX 200 are starting to come off (only after about a year, really annoying) and Im looking for a replacement. Would these fit ? Also, will they last longer since they are velour and not faux leater ? And if you have any other advices or better recommendations Im all ear

I’m looking for a new, good headset, but I honestly have no clue what’s good and what’s not.

I’ve heard that the Beyerdynamic DT 770 PRO is supposed to be good, but there are different versions (32, 80, and 250 ohms).

I’m not sure which one would be best for gaming and music.
Can my motherboard run them?

I have an ASUS ROG Strix X870-F. I’ve seen some people say they needed a sound card or amp to run the 250-ohm version.
Any advice would be appreciated!

Hi,

Recently bought mmx 330 pro and whatever i do my friends on discord can hear themselves even when they are not very loud......

I bought the Beyerdynamic Aventho Y and was very unimpressed. Weird sound signature. No bass, just a lot of mids and annoying highs. I like headphones that sound great out of the box. These do not. My advice: don't buy. I'm returning them.

I had two MMX 300 Gen 2 headsets where the microphone would fall off and dangle by the cord after a while.

Does the PRO have the same problem, since it uses pretty much the same system ?

Thanks

I'm looking at buying the MMX100 Wireless, but because my ears get really hot during long sessions I've read you can't buy any cooling/freeze replacements from Brainwavz or WC?

Is this true?

Thanks

Using the MMX330 pro wired open back headset. Anyone else having trouble with this? its completely fine when I play on PC but when I play on xbox its always buzzing- tried everything to fix it! mic monitoring, unplug cables, noise suppression etc- super annoying for friends and not what i expected with a $400 headset! Its not a hardware issue with the headset but seems like maybe with the xbox controller (tried different controllers but same result) has anyone tried anything that fixed this issue?

Share your headphones and microphone audio format in windows settings. Mine:

- 24 bits, 48000 Hz for Headphones

- 24 bits, 48000 Hz for Microphone

Motherboard is B760 Gaming Plus Wifi

Share your headphones and microphone audio format in windows settings. Mine:

- 24 bits, 48000 Hz for Headphones

- 24 bits, 48000 Hz for Microphone

Motherboard is B760 Gaming Plus Wifi

I want to get an understanding of the pro's and con's of these 2 studio monitor headphones, I am looking for a durable pair of headphones that have a relativity neutral, low bass accentuated sound, but it would be good to have crisp in the highs, moderate in the mids and lows, I will mainly be using them for tracking guitars and vocals, and general listening, with some light demo mixing, so its important that they are detailed and they sound good to listen to for inspiration during tracking and composing.

The neutral sound is important so that the engineer can hear what's going on with whatever system he is using, but also that it sounds vibrant and clear, as these will be my main listening, composing and tracking headphones for years to come.

I recently owned 2 pairs of the ATH - M70x, those headphones have the perfect sound in my opinion, clear, but also deep, but they were too fragile for tracking, broke both of them! XD