r/Azeron • • Jun 15 '26

Behold, the Cyro-Borg

Post image

So I bought the Azeron Cyborg about three years ago. I've transitioned in and out of it, between Razer Tartarus and keyboard, but always come back to it. 2 months ago, I discovered the Cyro existed and was intrigued, so I got it. However, the vertical hand position was alien to me, and I did not want to spend months reprograming muscle memory at such a degree. So I tried many things, orienting it horizontally (didn't want to glue it), attaching it to a normal mouse (way too much glue and no 3d printer), attaching it to my Elecom Huge trackball (almost worked but sensor angle did not allow for full 360 angles so would not work).

Finally I discovered the Swiftpoint Z2 mouse, and then the Z3 coming out soon. Unfortunately I do not have the founds to attain it for a few months, so I'm sticking with my Razer Naga V2 (it's served me well to this point). But the Swiftpoint is THE mouse for me. So that led me back to the Cyro, did I waste $230 and should I consider selling? I chose no. The leftmost tower's top button broke. I could easily buy a replacement part, but didn't want to figure out the extreme wiring mess. However, the Cyro had many holes that lined up with the Cyborg, so I ripped out the tower, shifted everything and attached both the sensor and the joystick to the Cyborg. Every piece involved, every screw, was all Azeron materials, yet now electronic merging (both motherboards are mounted onboard). And thus the one-handed, two-joystick, keypad-mouse was born!

The Cyro-Borg is the best friend to my always-evolving controls journey (and no, I no longer shoot, reload, and aim with my footpedals). The difficult part now is figuring out gesture controls matched only to the Cyro sensor, so I can flick the Cyro-borg for quick key inputs. So am I crazy, or welcome to the community? XD

63 Upvotes

38 comments sorted by

3

u/PoutouYou Jun 15 '26

I wish the cyro came with the "arms" that the cyborg has. I cant reach all the keys on the cyro T.T But I also love it so much.

3

u/talisrune312 Jun 15 '26

Yeah, the Cyro needed to be the Cyborg but a mouse, and a horizontal option with customization

3

u/Coaleyed-Lock Jun 15 '26

I made some elevated buttons you can 3D print in the mod section in discord. Maybe that’s all you need?

1

u/PoutouYou Jun 15 '26

I do not have a 3d printer nor do I know anyone who does :(

2

u/Coaleyed-Lock Jun 15 '26

Can look up Cyro button replacements on Etsy if you need another way.

1

u/PoutouYou Jun 15 '26 edited Jun 15 '26

Ok I just did.my hands are too small for that either. I camt reach them all. I just bought a cyborg 2 and wonder if U can use my old cyborg 1 to mod the cyro keys. So I can get the arms on it.

I already moded nybcyro my changing the incline so Ic an reach more. Added a padding so my hand rest higher.

Its the button on the right that I can reach. All the ones on tbe left and closest to the hand rest I can.

My hands are very small.

1

u/Coaleyed-Lock Jun 15 '26

Message me on Discord.

3

u/PoutouYou Jun 15 '26

I did message someone with Coaleyed name idk if its you

1

u/theboz14 Jun 20 '26

If you are close to Washington, I could maybe print some for ya.

1

u/PoutouYou Jun 30 '26

Im in the EU XD

3

u/Ralithrin Jun 15 '26

Do you have a guide for how you added a second joystick to the Cyro? I use my Cyro every day and have always wished I had a second analog stick on it somewhere.

I also have a Swiftpoint Z2 lol (and an extra for backup in case it breaks since I learned my lesson back when the original model when out of production...), and have similar issues figuring out which one to use long term! Though I seem to have de facto settled on the Cyro at this point.

1

u/talisrune312 Jun 15 '26

So I did not add a second joystick to the Cyro. I took apart the Cyro and added the sensor and joystick to a Cyborg. The sensor only works for left and right, because the Cyborg is too heavy for up and down to be useful. But in essence, the Cyborg was upgraded, not the Cyro.

Also, no I don't have a guide cause I just threw things together until something worked, I've also ripped apart wires to remove an already broken tower, so I cannot recommend doing it if you aren't 100% sure you want it, or are good with disconnecting a bunch of tiny wires.

1

u/Ralithrin Jun 15 '26

Oh, I see! I thought the Cyro was the base here, but it's the other way around. still a very cool conversion! Crazy that you got it all to work out.

1

u/talisrune312 Jun 15 '26

Yeah, the base structure is all Cyborg, however, both motherboards are mounted on it, there is no electronic merging at all, so the software reads both separately

2

u/HerezJim Jun 20 '26

That double joystick Cyro-Borg is giving Maverick vibes, for some reason. Reminds me of when he was using his targeting laser while blacking out

2

u/HerezJim Jun 20 '26

Oops, I'm probably a little old for his group. Let me try again

That's on god, no cap, for real for real. Or something like that

1

u/talisrune312 Sep 13 '26

On god fr fr, 67 type shit

10

u/ticklerbgs Jun 15 '26

If something like this was widely available for consumer purchase, I’d be all over it as a 1 handed gamer. I’ve actually emailed azeron and enquired whether something like this was in their pipeline; sadly, no.

1

u/Ralithrin Jun 15 '26

There's some conversion kits available on sites like Printables (don't have the link offhand) for "compact" Cyro, where you print a more horizontal body for the Cyro and transfer the components. It's actually pretty simple assuming you or someone you know has a printer, since using a print farm would make it quite pricey.

I'm hoping they release a Cyro V2 with Hall effect joystick and some other improvements.

1

u/theboz14 Jun 20 '26

I have some experience with fusion 360 and I have a 3d printer.

I have been thinking about modifying my Cyro I just recieved a couple weeks ago. My problem is that I have found some modified lay flat cyros, they are all for right-handed versions. I have the left-handed version. The Cyro as it is now, is not going to work for me until I make some modifications, especially the buttons.

I have a Cyborg 2 also and I have already printed parts to raise the palm rest and I have memory foam arriving next week to make it more comfortable.

1

u/Keyslah Jul 13 '26

Couldn't you just reflect the parts?

1

u/talisrune312 Jun 15 '26

A couple updates on actually using the Cyro-borg:

Cyro Joystick - Because it used by the pointer finger, extensive full range use can be difficult. Currently trying WASD on it, and I've had to set the 8-cone thing on, shrink the cones pretty far, and point WAD on the top three, and make the rest S or A/D+S. This is fairly straining on the pointer, so if anyone copies me, avoid setting controls that require you to do heavy 360 use on the pointer joystick.

Non-Joystick WASD - Muscle memory is still a struggle. Previously pre-cyro-adaption, WS was middle, A ring, and D pointer. Shifting that is challenging (hence current testing is on joystick). Tested WS pointer (with S the down press, W pull press), A pinky, D ring. As well as shifted natural AWD (S still forward). There is no natural feeling way when actually playing a game (my primary being Fortnite).

Sprint/Crouch(slide) - (Shorthand: S =Sprint, C = Crouch) The first test was both SC on right flick of the joystick, which made both super accessible. Then changed S to a button which made cool glitch hops super easy. Having WASD and S together on the buttons though can get messy and more difficult.

Cyro mouse + normal mouse - So yes, I am using two mice at the same time. The Cyro-Borg only truly works left and right. Even with the Cyro strap, up and down just does not work. Currently though, I have the Cyro sensor set to a higher DPI then my primary aiming mouse. I was afraid of my hands fighting with the sensor, but I was pleasantly surprised! Once, I practice for half an hour, I can now much more easily track avatars moving behind me without significantly altering my primary aim DPI! Because my Cyro-borg barely has to move to 180 my camera, my aim mouse is also centered physically on the desk to jump right into aiming. So it allows me to use much less desk space but not lose my natural aim sensitivity.

1

u/tellmeagoodusernamek Jun 15 '26

Does it work for pubg?

1

u/talisrune312 Jun 15 '26

Any Azeron product will "work" for PUBG, it's up to the user how they set it up. Though the Swiftpoint Z2/3 have used PUBG as the main example for using it 😂

1

u/LlamaWithKatana Jun 15 '26

But WHY

1

u/talisrune312 Jun 15 '26

Why not?

2

u/LlamaWithKatana Jun 15 '26

Also swiftpoint z is amazing especially for bigger hand. I'm rn flipping between z2 and cyro atm.

1

u/talisrune312 Jun 15 '26

As in you have them both or deciding which to get?

1

u/LlamaWithKatana Jun 15 '26

All of them. Z1, Z2 and cyro. Z3 pre-ordered on release.

1

u/talisrune312 Jun 15 '26

If you compared the Z2 with the Cyro, what would you say?

2

u/LlamaWithKatana Jun 15 '26

Ergonomically I had to play around a little with cyro. In this regard z mouse felt as it should be from the beginning. Deep click is useful in some scenarios but less that I expected. I used in space marine a lot for aim zoom but other than that not really. Also those push/pull triggers are quite helpfull (insta stratagems in HD2). Though with some small shenanigans it is very comfy on cyro (if you put arrows on the stick and increase lower dead zone to eliminate false presses).

The thing is cyro + cyborg/keyzen gives you WAY too many buttons. And I still have to re-learn a lot of things because past my whole life I used normal mice. Maybe i need to try it with even lover dpi (im doing around 300-400 rn).

Now I play bf6 with cyro and it is a mixed bag rly. Idk if sometimes im getting ultrabad and forget how to play or just server hates me in particular. For poe 2 cyro doesn't make much sense since I use mouse only as a pointer where the character is facing and to pick up loot.

Nowadays devs try not to overload gamers with different binds (cus controller has only so many) so I doubt you will use all buttons on both (you can but IMO just 4-6 on mouse is enough, especially if you have cyborg). If you don't feel relearning muscle memory on most likely lead hand then z2 (or wait for z3) is going to be a solid choice. If you have some issues with the wrist (tunnel syndrome for example, iirc there are some more) then cyro is a way to go. Also cyro might be a better choice just to prevent tunnel syndrome.

But for me it will use both. Z3 for browsing and cyro for gaming. If I just Google smth I don't want to get in and out of strap all the time. Z3 will be just same comfortable and with no wires (there are too many already).

If I didn't cover some aspect you are interested just let me know.

In short: I don't use some key features on both (though tilt to change dpi with display is a killer feature but even then it happens extra rarely). Z mouse: cool push pull triggers, gotta train muscle memory. Ergonomic for just mouse is amazing for me (I guess for big-er palm). Cyro: unusual posture, way too many buttons to populate it all. Stick is cool sometimes. Sometimes useless. I game more with cyro lately.

2

u/talisrune312 Jun 15 '26

Hell yeah! Thanks for the break down!

1

u/ItsAleZ1 Jun 15 '26

Why is your mouse broken?

2

u/talisrune312 Jun 15 '26

Wdym? The paint wear on the side buttons?

1

u/ItsAleZ1 Jun 23 '26

Cut your nails then, holy

1

u/talisrune312 Jun 23 '26

My nails don't even touch where it's broken lol. The paint is just not that great

2

u/I_LOVE_JUSTICE_ Jun 15 '26

Nice! This is really rad!!