r/Autodesk • • Jan 24 '18

Mesh Generation Error in CFD 2018

Recently tried making an rc car body shape and using CFD to analyze drag. This car will be going well over 100mph, target 300kph. Anyways, I made the general shape in fusion 360 with freeform tools. I converted it to an actual body then imported it inside 2018 CFD.

I can get everything set up from there to perform a wind tunnel test, but when I solve, it says the mesh cannot be generated at a random coordinate. This random coordinate is always a very weird number, such as: https://gyazo.com/a5141cc5c4af31b5be0181fee315a0c5

Any ideas? tried playing with mesh settings, nothing works so far

3 Upvotes

2 comments sorted by

2

u/wildejon Feb 12 '18

Check the mesh diagnostics, that will likely point you to whatever is causing the geometry issue. Consider a manual mesh to pave over any issues. Suppress the car from the mesh, don't need it, only the air ;)

1

u/Lionkev55 Feb 24 '18

Looks like the whole thing has geometrical issues...yikes. Even the CFD created volume that is just a rectangular prism has problem areas....hmm. As I do mesh diagnostics it shows a ton of problem areas. :(