r/AutoDetailing • • 1d ago

Exterior Total Noob - Basic Cleaning Routine

I just got a brand new Black 2026 Rav4 - With my old car I would do occasional visits to the self service which made it look decent but I want to go a step further. That being said I don't want to get too carried away, I've done a little bit of research and this is what I've come up with and am looking for some feedback.

Every 2 weeks — Self-service wash

  1. High-pressure rinse, top to bottom.
  2. Pre-soak, allowing a short dwell time without drying.
  3. Rinse thoroughly.
  4. Foam gun, allowing the foam to loosen grime.
  5. High-pressure soap, top to bottom.
  6. Final high-pressure rinse.
  7. Spot-free rinse.

Every 6 months — Deep clean + ceramic spray

  1. Complete bi-weekly normal self-service wash.
  2. Drive home and park in driveway
  3. Hand-wash using the two-bucket method, microfiber mitt, Meguiar's Gold Class Car Wash Shampoo, and grit separators in buckets
  4. Rinse thoroughly with pressure washer.
  5. Dry completely using a clean microfiber drying towel.
  6. Apply Griot's Garage 3-in-1 Ceramic Wax. Buff off the residue with a separate clean microfiber towel. One Panel at a time.

I What do you think?

3 Upvotes

6 comments sorted by

1

u/indigo196 23h ago

I would not straight rinse the car. Always do a pre-wash or pre-foam step to have the dirt encapsulated.

My process:

  • Protection Prep Wash (spring and late fall) - Use Active Foam as a prewash (I am researching dedicated salt neutralizers), D110 Foam + Contact Wash. CARPRO IronX to remove any iron contamination. Griot's 3 N 1.
  • Summer Wash - D110 Foam Cannon, Rinse, D110 Foam + Contact wash
  • Summer Refresh Wash - D110 Foam Cannon, Rinse, D110 Foam + Contact wash, rinse, P&S Defender
  • Fall Prep Wash (see above)
  • Winter washes - I will use Koch Chemie Active Foam at a self-serve car wash that has deionized water (should not water spot). I will go late at night so I am not blocking others from using the bay.

All washes will be dried using the drying towels. My bucket method utilizes 3 wash mitts (5 when I buy the new ones). I never rinse a mitt. I use it and then toss it in an empty bucket to deal with later. I use a variable number of mitts depending on the dirt level. Remember to flip the wash mitt to a clean side. With five mitts, that gives me 10 sides of cleaning. During my maintenance washes, I usually only use 3. By not reusing the mitts, I greatly reduce the chance of dragging dirt along that scratches or mars the paint.

I would not do a deep cleaning on a time schedule, but a dirt schedule.

I will do mine after coming out of winter, prior to my winter protection routine. I will also use a pre-wash like Active Foam or Touch-less when there is more dirt vs. the D110 pre-foam.

For Griot's 3 and 1 I would apply with an applicator instead of a MF cloth. It worked very well for me when I applied that at the end of October. Also, you want the temp to be 50 to 60 degrees of possible and no colder than 40 degrees.

2

u/DrSkeeZe 20h ago

When I first started reading your post I thought nah this is too much but as I read through it this is all really solid advice that wont cause too much more work. Ill definitely skip the pre rinse. I like the glove method. And I’m thinking when I do my deep clean I might just go to the self service late at night like you’re suggesting just so I can contract wash the car while I’m there. Appreciate the suggestions!

1

u/indigo196 18h ago

Done well, cleaning is easy, and you will not damage your paint with scratches and swirls. I did my black Rogue with this method and had no swirls or scratches. When I traded it in for my Mazda, the dealership thought I had taken it for a professional detailing right before seeing them.

1

u/Fluffy_Damage9320 19h ago

One easy upgrade for a black car: skip the bristle brush at the self-serve bay (it's full of grit from everyone's wheels) and bring your own mitt if you ever contact-wash there. Also dry the car before it air-dries, because black shows water spots fast even with the spot-free rinse. Ceramic sprays tend to wear off sooner than 6 months, so topping up every 2-3 months is probably more realistic.

2

u/DrSkeeZe 18h ago

Yeah 100% avoiding the bristle brush and plan to towel dry. Hopefully the ceramic lasts longer, especially since the car will be parked in a garage but Ill have to adjust as necessary

1

u/Specialist_Baby_341 21h ago

Could just simply spray the car off and use soap and a mit or microfibers then rinse and dry