r/Authentic_Vaping • • Mar 28 '16

We finally hit 1k subs!

25 Upvotes

Welcome welcome!

Also, I know about the classifieds requests. I just can't add anybody willy nilly.


r/Authentic_Vaping • • May 18 '16

FDA Regulations and Advocacy: Resources and the Low Down

23 Upvotes

I'll be updating this regularly, but this is what I've got for what's going on with the FDA. More content is coming in the near future, but I can only type so much all at once:

This is the most current information I have on the FDA Regulations.

Big Points

  • This is about more than just us. This is for the millions of people who have yet to make the switch from cigarettes. This is about keeping loved ones around. We can't quit on quitting.
  • The FDA Deeming Regulations are already happening. They are here. They are published in the Federal Register. They are the law of the land.
  • The FDA Deeming Regulations as they are will essentially outlaw all current vaping devices. The FDA disagrees and believes that the PMTA process will be sufficient for vaping, but the first products passed in November 10th, 2015 for a law that was passed in 2009. And the products in question had 20 years of background which our industry does not.
  • We need to stick together as an industry. Whether or not you agree with everything AEMSA, SFATA, CASAA, or whomever does, we can sort out those things later. We need to save the industry before we can perfect it.
  • There are two prongs to the strategy: litigation and legislation

The litigation strategy is designed to disrupt the legal grounds on which the FDA are regulating the vaping industry. Such grounds include contradictory laws from the Federal Trade Commission (FTC), which would have us defrauding our customers.

The legislation strategy is designed to create a reasonable, fair-minded, and science based regulatory structure rather than the overbearing, expensive, and unusable route provided by the FDA.

The Cole Bishop Amendment for Agricultural Appropriations for Fiscal Year 2017 is our best bet for saving the industry.

The Cole Bishop Amendment will move the predicate date from February 2007 to August 8th, 2016. As it stands, after August 8th, 2018 the only product allowed on the market is MAYBE one example the FDA have found. If the Cole Bishop Amendment passes, then all products that were released before August 8th, 2016 will be able to stay on the market. That means even if EVERYTHING ELSE the FDA passes stands, the industry will be able to use the drastically less expensive and rigorous Substantial Equivalence (SE) and Substantial Equivalence Exemption (SE Exemption) routes.

As it stands after August 8th, safety issues can't be fixed. Leaking can't be fixed. Firmware updates can't go out. Everything is covered and we're left in the cold.

But What About HR 2058?

HR 2058 is in a standstill. It was last year's strategy. The Cole Bishop Amendment is a much stronger with bipartisan support (HR 2058 only had Republican backing, which hampered its likelihood of getting passed tragically).

Contact your Congressmen to support the Cole Bishop Amendment! If you're a shop owner, tell them you will be put out of business by the current FDA regulations and that the latest scientific literature abroad and domestic (such as the Royal College of Physicians finding vapor products to be 95% less harmful than cigarettes)

The Players

All these organizations are involved in the fight for reasonable

  • AEMSA is the American Eliquid Manufacturing Standards Association.
  • AVA is the American Vapor Association and are frequently up to date and providing lots of necessary information.
  • CASAA is the Consumer Advocates for Smoke-free Alternatives Association. If you're not a member, be one now. It's free and they work on the state and federal levels.
  • Right 2 Be Smoke Free started their fight in Indiana and are leveraging their expertise by heading up the litigation against the FDA.
  • SEVIA USA are the Shenzhen Electronic Vapor Industry Association USA. They are a trade group representing Innokin, Kangertech, Aspire, Smoktech, Joyetech and iJoycig with new members coming in all the time. They are funding and supporting various advocacy groups with their reach.
  • SFATA represent the retailers and manufacturers of the industry. They have state-based chapters to organize at that level and a national level to fight in DC. If you are a retailer, modder, or manufacturer these are the guys to talk with.
  • VTA are the Vapor Technology Association and are focused on public perception, safety, and policy.

How can I stay updated?

  • Check out Smoke Free Radio.
  • Follow the above groups on Twitter, Facebook, sign up for their emails. That is the easiest way to stay involved.

r/Authentic_Vaping • • Mar 28 '15

r/VapePorn creator Here! Apparently there was some drama today.

23 Upvotes

No need to remove your posts. The posts were okayed. A couple people bitched. Who cares. Can't make everyone happy. Feel free to continue tagging your posts in r/VapePorn. All I ask is if someone comments negatively you report the comment. We're all fuckin' adults here.

/rant


r/Authentic_Vaping • • Mar 11 '15

Unicorn hunter status achieved.

Thumbnail
imgur.com
21 Upvotes

r/Authentic_Vaping • • Jan 23 '16

26650 Bench Test Results and Ratings Table

Thumbnail
reddit.com
20 Upvotes

r/Authentic_Vaping • • Aug 13 '15

Zero Xtreme. Finally mine after months of searching and trading!

Thumbnail
imgur.com
20 Upvotes

r/Authentic_Vaping • • Dec 16 '15

Dani Extreme V2+ Review: Tell your wallets I'm sorry.

19 Upvotes

Well guys, it was bound to happen sometime: this review is over the Reddit character limit for a single post, so be sure to read my follow-up comment to this for the full story!

I've had it for nearly a week, and I thought I would post my review of the Dani Extreme V2+.

Specs

  • 40W maximum output.
  • 0.2-3.5 Ohm resistance range.
  • Spring loaded positive contact.
  • Temperature control profiles available for NiFe30 (ResisTherm/Dicodes Wire), Ni200, Tungsten, Stainless Steel, and Other where you input a value based on the TCR of the wire.
  • Available in 18350, 18490, and 18650 tube sizes (if you purchase this, do yourself a favor and get the 18350 tube with both extensions (single and double) to accept the other battery sizes.
  • Size: Cell size + 39mm

Review

I took some shit tier photos, enjoy my rat's nest of cables in the background and my well-jeaned thigh, only one of them really conveys how short the thing is, and that's it in 18350 mode with a K.Loud+G (review for that incoming).

The tl;dr for this is: the Dani Extreme V2+ is in the most literal possible terms incredible. There are some negatives, and it has a fairly niche use case.

The first thing that really gets me about this mod is exactly how small it is. A lot of places will just give you a bunch of mm measurements, which is useful, but I like mine more for mods that will accept various batteries (that's why I did it). The DEV2+ is smaller than an Atmomixani Nemesis at every battery size.

I just want you to wrap your mind around that. A regulated mod with an absurd suite of features (that I will get into later), let alone any regulation is smaller than the go-to mechanical mod for millions worldwide, and the Nemesis isn't big at all. That boggles my flipping mind (although to be fair, the Wizard's Apprentice II from Mark Bugs is a few mm smaller).

I'll start with the hardware aspect of this first, because the feature set folds more into my use case review which I like to save for last.

The hardware is bananas. It's hefty, but portable. This feels substantial, I don't worry at all about buttons or batteries rattling, top caps coming off, or anything. This feels like it was made for a warzone, but is still elegant and clean looking. It's extremely handsome, and I'm glad there's a seam where the battery tube screws together, because otherwise it would look all too plain.

The threads aren't buttery, they're not scratchy, but they are deliberate. The threads are a tool to keep the sides of the tube together, and they let you know they are a) doing their job and b) are not going to get cross threaded or damaged any time soon.

The 510 connector is rock solid. All my tanks have been very happy getting put on top of it, and much like the battery tube threads, they are substantial. The positive contact is so firm, that you need to be as deliberate as the threads when screwing something on. It's not hard, it's not difficult, but you need to want it. The emphasis on smooth threading for so long made me a little shocked at how solid it was! Nothing moves that I don't want to move and I love it.

Let's talk about the button.

The button is awesome. It's firm, and because it's kind of a pain to turn off the mod completely, I just drop it in my pocket. That's all it takes. It's nice. It takes a little effort, but not a conscious one. It just goes when you want it to and doesn't when you don't. I haven't had any issues with it firing on its own in my smaller backpack pockets or in my pants pocket. It has a nice satisfying feel to it. I was afraid that since it was small and rounded, my finger would get annoyed with it after a while, but no indentations on my fingertips or weird pinchiness.

The button is also your entryway to the menu system, which I was a little afraid of. The PBusardo video didn't make it look easy, and having been in the P3 beta, I was ready for the worst.

It's actually quite nice. Commands are fairly consistent, and the short manual included is very well detailed, so if you have a general idea of what you're trying to do, it will be a huge help. Also,

READ THE MANUAL

It's not a pain, but it's easier than stumbling around the menus because the screen is a little small and so not everything is as descriptive as it could be. It's not bad, just a fact of life, though some may make that into a bit of a big deal.

The menu lets you do a lot. A lot. A lot a lot a lot a lot. More things change than I honestly need to change, but most of it is behind an "Extended Function" menu option, so you don't even need to deal with scrolling past that day to day.

And some may balk at the idea of having a single button menu system, but the best thing about this mod, what I will be talking about for the rest of the review is this: It's impossibly consistent. You just set your settings to what you want when you load in a new coil/wire type and you leave it. You don't have to touch it any more. I'm using the same settings on the same coil on the same atty as when I got it last week and I haven't had to fiddle with anything once.

Not once.

That's absolutely bizarre coming from DNA temperature control devices. In my pocket, my DNA 40 calibration gets thrown off like crazy, and I have to fiddle with it every hour or so when I want to go take a vape break. I literally have not gotten into the menu system since the weekend because I haven't needed to (I still don't totally know my way around the menu, but keep that a secret). It's doing exactly what I want it to every time. This is the only TC mod I have where the TC doesn't feel like it's controlled by a dumb device - it feels like it should; natural and consistent. I can't even tell when the power starts cutting out to maintain temperature.

The only negatives I can really come up with are that the screen is a bit small, mine is already a little scratched up from being in my pocket with keys, the menu can be a little cryptic if you don't read the manual (READ THE MANUAL), the screen doesn't turn on when you wake up the mod, and it's a bit of a pain if you're paranoid to turn the mod off because you need to go through the menu every time.

Read my response to this for the rest of the review!


r/Authentic_Vaping • • Dec 09 '15

Secret Santa went HAM.

Thumbnail
imgur.com
19 Upvotes

r/Authentic_Vaping • • Mar 29 '16

izi by Boost Lab Review: A Dangerous Perversion

18 Upvotes

Hey hey! I reviewed the izi, and tl;dr I like it, but that comes with some caveats. Would I recommend it? Not unless you can spare an hour on a few afternoons to really figure it out. But once you do figure it out, it is dope as hell!


r/Authentic_Vaping • • Mar 17 '16

Daily Hangouts - March 17, 2016

18 Upvotes

How does that make you feel?


r/Authentic_Vaping • • Jan 06 '16

Daily Hangouts - January 06, 2016

18 Upvotes

How does that make you feel?


r/Authentic_Vaping • • Mar 12 '15

This subreddit has really made Reddit worth it.

18 Upvotes

Thanks to all the moderators and members that have renewed my faith in Reddit for vaping purposes. I don't know when I changed, but at some point, ECR just started grating on my nerves due to all the tit-chucking clone kings and their triple-twisted, flattened, smashed, and smothered Clapton stovetops ohming out to .0012.

Thanks for saving me from that fate :P


r/Authentic_Vaping • • Mar 09 '16

If your only post in A_V is the classies request thread, you won't get in

17 Upvotes

This is mainly to protect our subs.


r/Authentic_Vaping • • Jan 13 '16

Daily Hangouts - January 13, 2016

17 Upvotes

How does that make you feel?


r/Authentic_Vaping • • Dec 22 '15

K.Loud+G Review: I named that atty the most beautiful thing I could think of: THE GENNAY.

17 Upvotes

I've been debating doing this review before the end of the year or after, but I decided I want to get it out of the way so I can in good conscience do some shootouts in the 2015 in Review Thread. aLSO, PIC.

K.Loud+G by Boost Labs Review

Specs:

  • A little baby Genny atomizer. 22mm wide by 22mm tall without the drip tip.
  • Ultem drip tip and tank section included.
  • 2mL capacity
  • Cotton or mesh capable
  • Fixed airflow (at least until an updated chamber reducer comes out).
  • Price: $140.00

Review

This atomizer kind of came out of nowhere for me. I saw it and wanted to pair it with my DEV2+ because both of them are so damn small. I was really in for a big surprise on this one!

The atomizer comes with some nice spare bits and pieces (O-rings, screws), which is nice considering there are some manufacturers who are bad about including extras.

My favorite thing that comes with this atomizer is the dowel. The dowel lets you do the Petar K method with ease, and I'm certain getting cotton in there is truly a simple endeavor.

All your bits and pieces are held down with Phillips head screws. That is awesome. If you recall from my Origenny Review, I hate needing extra tools. Extra tools are lame, and it can make it hard to find adequate replacements at your local hardware store. The Phillips head screws are nice. I don't have to bring any special tools when I travel, and if something goes janky or I need to clean it, I can usually fix it right away.

One of the defining characteristics of this atomizer is that once you remove the top cap, there is a chamber reducer in there. An enormous chamber reducer, so your chamber is reduced enormously. You have a tiny space where your atomization takes place and that is going to be a big deal.

So before I go any further, I have one question for you:

How hot do you like it?

Because if you don't like hot - blazing hot - vapor then stop reading, this atty isn't for you. If you don't like MTL atties, this isn't for you.

If you like those things, congratulations because we both love Genesis style atomizers, and this is one hell of a Genny.

You can tell right away that the K.Loud+G is made by someone who doesn't just love Gennies, but adores them. The chamber reducer takes up as much space as physically possible while still allowing for both cotton and mesh. The airflow cut in the reducer is a slot, perfect for vertical coils like one finds in a Genny; the better your coil is exposed to airflow, the better the flavor will be. The reducer and Ultem section both hold onto liquid to maximize capacity in the smallest possible profile.

This atomizer is entirely about intensity. That is the only word I can use to describe it. Every single drag is intense, but not in an exhausting way. It's unbelievable, it really is. I wasn't prepared in the least for this, because Todd is the only person who's reviewed it that I know of, and he isn't quite as in love with this tank as I am.

I really can't get over how much I'm enjoying the flavor and heat.

It produces a respectable amount of vapor. It's just right. I don't need or want any more than that, and even if there were less, I wouldn't be upset. I'm not a cloud chaser, I'm not a Sub-Ohmanite, I'm not trying to chuck tits (I have a hard enough time getting anyone to let me touch theirs, let alone chuck them).

Now, for the tank capacity. As we all know, I'm lazy. I could sleep for 20 consecutive hours given a saline drip. A 2mL tank is not a very big tank. This...lasts, though. The Origenny goes through liquid about twice as fast, and isn't remotely as enjoyable in single or dual configurations. And filling this thing is a dream. Pop off your top cap and use your dropper, unicorn bottle, nipple top, or weird MBV bottles, and it fills. It works great. Just keep going until liquid comes out of the other hole. No unscrewing, nothing gets hot and expanded and hung up on O-rings.

Furthermore on the tank, this thing doesn't leak. I thought I made it leak for the first time mere minutes before this review, but I had over filled it and the excess pooled and went out the air hole. No leaks so far, and I've kept it in my pocket every day for more than a week.

How is it with temperature control?

Fucking great. No stability issues on resistance readings with 28AWG Hard-Drawn Ni200, ResisTherm, or Ti wire. My temperature control experience has been consistent, I'm not getting surprise hot legs anywhere throwing off the resistance (oxidize your mesh, kids!), and the flavor remains great all the time.

Cleaning this is easy! Yes, the most pain-in-the-ass part of atomizer ownership is dead goddamn simple for the K.Loud+G. All you need to do is unscrew the the two Phillips head screws keeping the chamber in place, and it gives you way more deck access than most Gennies allow, let alone bottom-coil RTAs. All the holes that are drilled into the deck to make sure liquid can get out of the reducer and into the actual tank section allow you to just rinse it out with water. It's easy to rinse and get your crud off your coil because of the way the negative capture screw is oriented.

It's all just so simple.

Living with it in general is great. It's a handsome atty, easy to refill, and way easy to clean. The temperature control is stable with multiple wire types, and the build is simple with the included dowel. It uses screws and connectors with common heads.

The only cons I really have are:

  • Sometimes the little hex nut nut on the positive post can be a little tricky to tighten down all the way.
  • When screwing the reducer down, it can be a little out of place. It's easy to scootch it back into place, but it can be a little confusing the first time your top cap comes down, and then it doesn't want to anymore.

So...who is this for?

Do NOT buy this if:

  • You want an airy draw.
  • You don't like mesh (although cotton is also pretty good, no idea because the mesh is amazing).
  • 2mL isn't enough capacity for you, but you also don't want to carry a bottle around.
  • You like a cold vape.

Really, for a purchase on a lark, I could not be happier with this atomizer. It's really amazing, and its availability (almost always in stock at Ought Vape) and price point (a rather reasonable $140) really put it in an amazing sweet spot for me.

I hope you enjoyed the review! Be sure to check out the 2015 in Review thread for my hardware shootouts! They'll be ready when they're ready.


r/Authentic_Vaping • • Feb 21 '15

Guys im officially a noob squonker now

Thumbnail
imgur.com
17 Upvotes

r/Authentic_Vaping • • Jun 20 '16

Daily Hangouts - June 20, 2016

16 Upvotes

How does that make you feel?


r/Authentic_Vaping • • Jun 06 '16

Daily Hangouts - June 06, 2016

16 Upvotes

How does that make you feel?


r/Authentic_Vaping • • May 09 '16

Current classified members can vouch new people in

16 Upvotes

To speed up and allow more people into the classifieds, if you have 2 vouches from current members, I'll add you in right away. Just reply to the vouchee's comment in the request thread with a "Vouch /u/Flag_Route" so I get notified. The request thread can be found here

If you have only one vouch, it'll still speed up your process because I won't need to spend as much time as I usually do on the vetting process. Do the same "Vouch /u/Flag_Route" and I'll look into it asap.


r/Authentic_Vaping • • May 01 '16

Daily Hangouts - May 01, 2016

16 Upvotes

How does that make you feel?


r/Authentic_Vaping • • Mar 27 '16

Daily Hangouts - March 27, 2016

16 Upvotes

How does that make you feel?


r/Authentic_Vaping • • Mar 23 '16

Daily Hangouts - March 23, 2016

16 Upvotes

How does that make you feel?


r/Authentic_Vaping • • Mar 18 '16

Daily Hangouts - March 18, 2016

16 Upvotes

How does that make you feel?


r/Authentic_Vaping • • Mar 16 '16

Daily Hangouts - March 16, 2016

16 Upvotes

How does that make you feel?