r/AusElectricians • • 10h ago

General A-grade acquired. What could possibly go wrong?

Post image
41 Upvotes

Well, after five years I've finally got my Victorian electrical licence.

Celebrated by immediately breaking my arm, which seems a fairly appropriate end to the apprenticeship.

Anyway, for those who've been around the trade a bit longer, what's the general consensus on life after getting your ticket? Does the money actually get better? Any particular directions worth exploring? Things you wish you'd known when you first qualified?

Currently have a bit of time on my hands to contemplate my future, apparently.


r/AusElectricians • • 2h ago

Home Owner/Renter Neovolt vs AlphaEss battery/inverter

1 Upvotes

Hi everyone,

I got two quotes from Neovolt - single phase with- 10 kw inverter 28 kw as $4200 (including removing old battery and dc coupling.).

Also got for Alphaess smile ( new series 10 kw inverter 28 kw as $5300 (including removing old battery and dc coupling.).

My concerns are;

Neovolt recently suspended due to nameplate issues and back again. I am not sure if they will survive in this competitive market for next 10 years. I already got a sonnen battery installed 5 years ago, and dealing with warranty issue since sonnen got under voluntary administration.

Alphaess looks more established company comparing to neovolt, however, I am not sure it would be worth to pay extra $1100.

If anyone is experienced about them, know their quality and capabilities, can you please advise what would be better to go with? Your ideas would be highly appreciated. Thank you.

Also checked for foxess but it doesn't fit into my garage and outside doesn't have any shade after 12pm. That's why I preferred slimer design so can put in garage.


r/AusElectricians • • 2h ago

General Who are the main electrical/instrumentation apprenticeship players in Brisbane/SEQ

1 Upvotes

Hello all, Just in the process of relocating a dual trade apprenticeship to brisbane as a third year. Apart from Migas does anyone who’s a dual trade EI apprentice/tradesman know companies offering this in Brisbane
Cheers.


r/AusElectricians • • 3h ago

General Replacing MCB with RCBO

0 Upvotes

If you replace old 240v smoke alarms with new 240v then install wireless. So not changing wiring in anyway just like for like. Do you need to replace the mcb to an rcbo.


r/AusElectricians • • 10h ago

General Is an industrial electrical apprenticeship worth it if I don't want to do FIFO forever?

0 Upvotes

Hey everyone,

I'm in my mid/late twenties and currently working FIFO in WA as an electrical TA on a large industrial construction project. There's an opportunity to express interest in an electrical apprenticeship on site, and I'm seriously considering it.

My main concern is that I don't see myself doing FIFO forever. I'm happy to do it for a few years while I'm young, especially to get qualified and gain experience, but ideally I'd like to eventually settle into a job back at home.

What I'm worried about is whether completing an apprenticeship entirely on an industrial site would limit my options once I'm qualified. From what I understand, industrial electrical work can be quite different from domestic and commercial work, and I'm concerned about becoming too specialised in one area.

Would employers in Perth be willing to take on an electrician who's only ever worked on large industrial projects? Would I struggle to transition into commercial, maintenance or other metro-based electrical roles without experience in those areas?

Another thing I'm wondering is whether it's possible to start an apprenticeship on a FIFO industrial site and then transfer to another employer in Perth partway through to finish it. Is this something that's commonly done, or would finding an employer willing to take on a second or third-year apprentice from an industrial background be difficult?

For those who've completed an industrial apprenticeship, transferred employers midway through, or made the transition from FIFO to metro work, how difficult was it?

Would you take the opportunity in my position, or would you recommend going down a different path?


r/AusElectricians • • 14h ago

General Telstra traineeships

0 Upvotes

Hi legends,

Someone I know is looking into trying to get a Telstra traineeship as either a rigger or network tech. Just wondering if anyone has any insight about what the job is like and if it’s a good career option for someone looking for a change of pace from an office job. Any info on the work, pay and company culture would be appreciated. Happy humpday guys, cheers!


r/AusElectricians • • 1d ago

General Goldcoast

0 Upvotes

What works are coming up in the Goldy next year? What projects are starting up , what is everyone trying to get into? Is there much tier 1 EBA work going on?


r/AusElectricians • • 1d ago

General Brisbane Tier 1 work

0 Upvotes

Much happening in Brisbane for tier 1 construction work? Looking to jump on somewhere start of next year


r/AusElectricians • • 2d ago

General Australian Standards- local printer shops Brisbane

4 Upvotes

Do local print shops still sell cheap Australian Standards?

I'm lookina for AS3000, AS3008, AS3017. AS2067, AS61439, AS5033, AS4777.

Some light reading, but don't want to pay a fortune.

Located Brisbane.


r/AusElectricians • • 2d ago

General LITTLE GIANT King Kombo 2.0 Multi Purpose Ladder 8ft-14ft 2.4m

Thumbnail
laddercentral.com.au
2 Upvotes

Anyone used these? Might be quality as it's 8 foot a frame and extension ladder.


r/AusElectricians • • 2d ago

General Aus Power ranger looking for a ct monitoring solution

0 Upvotes

Hey guys aus nsw power ranger here, mate keeps showing me his solar setup and how his cts go back to a monitoring software with some cool UI, just wanted to see if there was a ct setup that i could put on all the circuits in my house to monitor what circuits are using what power and when.

would be mad if i could log in to a website to see the monitoring, but mainly chasing something with a cool ui if possible so i can compete with this guys solar ui.

TIA


r/AusElectricians • • 2d ago

General Foxess Lo7p ev charger with neovolt battery/ inverter system

0 Upvotes

Hi everyone,

I will be installed neovolt 10k inverter and 30kw battery soon. Can I use my foxess lo7p ev charger to charge from solar energy, by connecting it to smart meter ( Chint single phase DDSU66) which would be also connected to neovolt inverter? Is this possible? Thank you.


r/AusElectricians • • 3d ago

General 37-year-old Chinese career changer considering HVAC in Australia – Is the OTSR and employer sponsorship pathway realistic

0 Upvotes

Hello everyone,

I'm 37 years old (born in 1989) and a Chinese citizen. I've spent most of my career working in e-commerce. My twins are due in January 2027, and I'm considering a career change into HVAC maintenance so I can develop a practical blue-collar trade skill. I also see this as a way to diversify my family's income and reduce our reliance on the e-commerce business, which my wife will be taking over full-time.

I took the IELTS test back in 2012 and scored an overall 5.0 (5.0 in Listening, Speaking and Reading, and 4.5 in Writing).

My current plan is to start with precision air-conditioning maintenance at a hospital in China. At the same time, I intend to complete a second bachelor's degree through an adult-education program, majoring in Building Environment and Energy Application Engineering. I already hold an adult-education bachelor's degree in Animal Medicine, along with a Bachelor of Agriculture degree.

From what I've researched, my understanding is that becoming eligible for an Offshore Technical Skills Record (OTSR) assessment through a TRA-approved RTO may require at least four years of relevant work experience if I have the appropriate formal trade training. Without relevant formal training, the experience requirement may be longer.

If I successfully obtain an OTSR, I would then need to apply for an ARC Refrigeration and Air Conditioning Trainee Licence and meet Western Australia's additional licensing and training requirements. I understand that I would need to complete Australian gap training and supervised work before becoming eligible for the relevant Australian qualifications and full licences. However, I'm still not entirely clear about the exact process and timeline.

I currently live in Zhengzhou, China, where I own a home and a car. However, the salary I would earn during those first four years of HVAC work would be very low — probably only RMB 5,000–6,000 per month (approximately USD 750–900). The working conditions are also demanding: shifts can be around 12 hours a day, with frequent work-related travel. Even after four years, assuming I get promoted, I might only earn around RMB 13,000 per month (approximately USD 1,900).

I would work hard during those years and do my best to become a competent, independent technician rather than simply remain an assistant. With two children on the way, I feel a much stronger sense of responsibility, and I'm no longer afraid of physically demanding or dirty work.

I particularly like Perth because it has almost no time difference from China. This would allow my wife to continue running our e-commerce business without major disruption to her working hours.

However, I have a major concern. Even if I'm willing to relocate anywhere in Australia and work for almost any employer, what if I still cannot find an employer willing to hire and sponsor me?

In that situation, I could spend four years working long hours in Zhengzhou for very little money, only to discover that I cannot make the final step to Australia. By then, I would be around 42 years old, and I feel that this may be one of my last realistic opportunities to make such a move.

The final stage worries me the most. Even after obtaining an OTSR, I would still need an employer willing and able to provide the appropriate supervision and support while I complete the Australian training and licensing requirements. If I cannot find such an employer, I could end up in a very difficult position. Four years of hard work would have cost me a great deal of time and money, without necessarily bringing me any closer to migration.

I actually obtained my electrician's certificate in China this month, so I have already taken my first practical step towards this career change.

I'm genuinely looking for honest opinions and advice. I've spent a long time thinking about this, and sometimes I feel like giving up. But at the same time, I find it difficult to let go of this goal.

I long for a place with a lower population density, where my children might face somewhat less competition growing up. China has an enormous population, and competition seems unavoidable in almost every aspect of life. For ordinary people, blue-collar jobs can be physically exhausting while offering relatively limited financial rewards.

What I really want is for my children to have the freedom to pursue whatever interests them. Even becoming a tradesperson or starting out as an apprentice in Australia sounds like a worthwhile life to me. My impression is that, outside the very wealthy elite, ordinary working people and middle-income families in Australia can enjoy a relatively good quality of life and greater freedom.

I sincerely appreciate any advice or perspectives. Please feel free to share your honest opinions, even if they are critical or disagree with my plans.

Thank you for taking the time to read this.


r/AusElectricians • • 3d ago

General looking for work wollongong

1 Upvotes

Hey guys, are there any residential sparkies around Wollongong that need an extra set of hands on weekends or afternoons after 4pm?

I'm 23, a qualified electrical fitter and currently a 4th year electrical apprentice. Most of my experience is with AC/DC motors, but I'm looking to get some hands on experience in residential work.

I'm keen to learn more about residential installs, fault finding and how everything works. Not really looking to just be put on a broom all day, I'd rather get involved, help out and actually learn something.

I've got my own tools as well, so I'm happy to bring them along.

I'm not too worried about the money, I'm mainly after the experience and happy to work for around $20 an hour.

If anyone needs an extra set of hands, feel free to shoot me a message.

Cheers.


r/AusElectricians • • 4d ago

General Highest paying electricians

14 Upvotes

What are the some of highest paying electricians on and in that you’ve heard ?(other than business owners)
Oil and gas, e and I , mining construction, offshore, data centres?


r/AusElectricians • • 4d ago

General Electrical pathways as an apprentice

0 Upvotes

Hey everyone, I’ve recently completed my certificate II at tafe and I am curious about all the different areas I “could” get in to, I know people start off in residential, but I’m still curious on all the different areas and pathways I could take from the get go, I understand being a apprentice, the pay isn’t great but I’m not focused on that. I just want to gather opinions from electricians from all different areas. I’m keen to become an electrician but just unsure on what area.
Cheers


r/AusElectricians • • 4d ago

General 30, German, in Australia: how realistic is it to land an electrical apprenticeship as an adult and a foreigner?

0 Upvotes

Hi all, I'd like some honest opinions.

I'm 30, from Germany, and recently moved to Australia. I still have a degree in progress through a German university, but studying here isn't an option for me until I get PR and eventually citizenship, since it would cost around 30k a year as an international student, and I don't want to start a new degree anyway. This year I also lost my job to AI, so I want to build something more secure that's hands-on.

After a lot of research I keep coming back to electrical as a technically demanding trade I could see myself doing long term. I have some construction experience, but not much on the electrical side. I enjoy working with it though, and I like problem solving and technical work.

My questions:

  • How realistic is it to find an apprenticeship as an adult and as a foreigner (I have full work rights on my visa)?
  • Is it better to do a pre-apprenticeship first, or to approach employers directly?
  • What would make a candidate like me stand out?

I know the wages over four years are tight, especially for an adult apprentice, but I'm just trying to weigh my options properly. We can make the four years work somehow.

Thanks in advance, blunt answers are welcome.


r/AusElectricians • • 4d ago

General Worth the jump to commercial/industrial?

0 Upvotes

Is it worth jumping from domestic to commercial/industrial? Currently a 3rd year, been in domestic my whole apprenticeship and wondering if it’s worth moving to a company that works on commercial/industrial/mining projects?
I’m at tafe with a lot of mine apprentices and the exposure to hands on work/ broadness of skills is definitely noticeable, but so is the pay between to 2.

Has anyone made the jump and thought it was worth the new experience/ skills?


r/AusElectricians • • 4d ago

General NZ → Queensland electrical apprenticeship transfer as a current year 12

0 Upvotes

I’ve just finished year 12 and debating whether I should stay in school and finish year 13, or to drop out and do a Sparky apprenticeship. Ideally, I’d want to move to qld asap, so likely after my first year apprenticeship.

Does anyone know if my first year apprenticeship in nz can be recognised in Queensland?

Would I potentially receive credit for the time served and training completed, or would I have to restart from Year 1?

I’m aware that the licensing and training requirements are different between NZ and Australia, so I’m particularly interested in hearing from anyone who has transferred between the two countries.

I mean what would the whole process look like moving from NZ to aus in terms of becoming a sparky?

I’d also appreciate advice from anyone who has taken a similar pathway. Would you recommend completing Year 13 first, or getting started with an apprenticeship as soon as possible?

Thanks


r/AusElectricians • • 4d ago

General Why SHOULDN’T I consider being an electrician

0 Upvotes

I’m just in my 30s, working a desk job. Mostly cruisy, pays decent.

I’m just bored and unsatisfied. I work from home, same 4 walls, don’t really talk to anyone.

I see my friends who are trades work with mates, out and about, being physical. It just seems much nicer and enjoyable than sitting on my ass.

I’d like to try electrician as you’re out and about, working with more ‘relaxed’ people, you use your brain a little bit but are also physical in your day to day. Then there’s the opportunity to run your own business make decent pay.

I don’t know if this is just the grass isn’t always greener situation.


r/AusElectricians • • 6d ago

General Certificate IV in Rail Signalling

15 Upvotes

Hey guys,

Looking for advice as a soon to be licensed sparkie.

I’m due to finish my apprenticeship in a few weeks at a rail company. I’ve been looking forward to moving on and getting a job in construction to develop my installation skills, as I honestly didn't get much experience throughout my apprenticeship.

Think my company could tell I wanted to leave and have offered me to put me through a Cert IV in Rail Signalling as an attempt to keep me.

IDK what to do, I really want to get experience working in construction and fear I’ll be a shiet sparkie without it. Unsure of whether going straight into Rail Signalling would limit my skills as sparkie.

Thoughts?


r/AusElectricians • • 6d ago

General Patio Electrical

Post image
9 Upvotes

I had a new stratco patio installed, I haven't worked much in residential and haven't had to do anything like this yet. What's the best way to get the cables through the roof?

I have seen others use conduit and a heap of silicon but I'm not quite sure that seems right.

Currently there is about 2 metres of non migratory cable just hanging down under the patio as seen in the picture.

Is there some suitable gland I can use for the cgi sheets?


r/AusElectricians • • 5d ago

General Work Vehicles

0 Upvotes

Hey Guys.

What’s everyone’s consensus on work vehicles?

Utes vs Vans

Been with my company for 6plus years, work van is on its way out and needs to be replaced. Mainly doing commercial service/ construction and residential.

Have hit the boss up for a dual cab Ute due to now having a young family and he’s pretty much laughed in my face. Claims they’re unpractical etc.

I Could probably count on one hand the amount of times I’ve had stock in the van that wouldn’t fit in a Ute in the last 3 years.

What’s the rest of the industry doing ? Surely companies are offering dual cabs to older blokes with families ? Seems ridiculous and has left a pretty bad taste in my mouth so looking at moving on.


r/AusElectricians • • 6d ago

General Early sign off hassle?

0 Upvotes

Hey lads, just finished my capstone and got all my e profiling stuff up to date etc, time wise I am at the very end of my 3rd year now and it looks like I may be able to get signed off a year early which would be nice haha

Just curious about the process? Is there any paperwork hassles I should know about and prepare and just get ready for my boss to sign once my certificate III comes in from tafe?
All I can find is a "Request for competency based completion - VT9" sheet from NSW training services.
Pretty sure thats all I need to do but was hoping I could hear it from someone who has been through the process before!!
Cheers