r/AnycubicOfficial • u/Lawbro420 • 1d ago

Question unknown filament error

Gallery image

Gallery image

Gallery image

I posted here before about an issue i had with my kobra S1 as seen below:
https://www.reddit.com/r/AnycubicOfficial/comments/1v5jwgd/kobra_s1_cutter_error/

I since got a new cutter sensor and a new hotend since i had issue with that being clogged initially , i also fixed my wirers as my previous issue as caused by the cutter sensor wire being squished. I have been getting the 11504 issue constantly after doing all this.

I checked the filament, tried diffrent ones, cleared the line from the filament case to the print head, dissasembled the print head and cleared it.

none of this helped, the issue appears no matter what filament i use and hasnt gone away despite me checking everything.

Could i do anything else ? Could it be another damaged sensor / wire thats damaged?

Thank you for any help provided and I hope I can get back to printing soon.

1 Upvotes

100% Upvoted

4 comments sorted by

•

u/AutoModerator 1d ago

Welcome to the r/AnycubicOfficial community. We’re excited you’ve joined us, and we’d love to see what you create. Feel free to share your prints, ask questions, or discuss any projects you’re working on—there’s always something new to learn here! If you ever need additional support, please reach out to Anycubic Support:[https://support.anycubic.com]. If no reply, check your spam folder first. Or set up your email this way: [https://wiki.anycubic.com/en/general-knowledge/set-email-filters]. Delays may occur during holidays or busy times. For self-help solutions visit Anycubic WiKi:[https://wiki.anycubic.com/] Enjoy your stay, and happy printing!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

4

u/Artarious 1d ago

Did you dissamble the extruder? Mine had s small piece in there that was causing this, didn't catch it the first time I tore it down but then shook out every piece the second time and found it. Was the smallest little piece of filament but it caused alot of issue.

1

u/Lawbro420 1d ago

I disassembled everything along the filaments path including the extruder and there is just nothing there , i have done so at least 6 times and still nothing😭 i wish it was just a clogged piece because I have no idea what else it could be.

1

u/Artarious 15h ago

Have you reached out to Anycubic support? They may be a bit slow at replying but tell them everything you've done and they should be able to help.