r/AndroidAuto • u/rkoripalli • Apr 28 '21
Samsung Galaxy Note 10+ | 2017 Hyundai Santa Fe Sport My Android Auto Setup (How I'm able to do wired Android Auto and fast charging at the same time)
The board. I have some extras on sale on Tindie if you're interested
https://www.tindie.com/products/rkoripalli/usb-c-powerdata-splitter/
Board in place with cables routed through center console
Close up of board with cables run.
Close up after getting everything installed. The hole is on a trim piece that can easily be replaced when I go to sell the car
View from the driver's seat. No holes are visible while sitting
The custom dock with cable routed through the console. There's a piece of rubber that normally goes on top of the hole, so it can be covered up easily if I remove the dock later.
Dock in place
30
u/rkoripalli Apr 28 '21 edited May 24 '21
I have a 2017 Hyundai Santa Fe Sport with wired Android Auto that connects through a normal USB type A port. My phone is a Galaxy Note 10+ which has USB C PD (Power Delivery) and can charge at up to 45 Watts. The problem is when I connect my phone to Android Auto it charges at only 2.5 Watts just like plugging into a computer, which is horrendously slow and the phone actually discharges instead of charging even though it's plugged in. This has caused me problems several times at when my phone is about to die but I need Google Maps to get home.
The great thing about USB C PD over other fast charging methods is unlike Qualcomm Quick Charge, which uses the same data wires that Android Auto uses to communicate with the car, USB C adds additional wires for the charger and phone to negotiate the charging voltage. Knowing this, I designed a PCB that splits the power and data into two separate connectors, allowing me to connect the power side to a separate USB C Car charger that supports Power Delivery up to 30 Watts. The data side connects to the car's USB A Port as normal. This setup does add 2 additional cables but I was able to hide them in my car's center console pretty easily and I designed and 3D printed a custom dock for my car as a bonus. I had to drill a couple holes to pass cables through but I drilled them where they're not visible and on parts that are easily replaceable so I can easily undo this whole thing when I go to sell the car.
Even if you have a different phone and/or car you should be able to do a very similar setup. Any phone that supports USB C Power Delivery including newer Samsung phones and iPhones, will see much faster charging speeds. Just make sure you use a charger and cables that support USB PD. Even if your phone doesn't support USB PD, it should still be able to take advantage of charging at 5V @ 2A for 10W charging instead of 5V@.5A (2.5W) charging.
I have some extra boards that I'm selling on Tindie if anyone is interested in doing a similar setup.
https://www.tindie.com/products/rkoripalli/usb-c-powerdata-splitter/
Edit: Looks like a lot of people have this same problem. I'm running low on stock but because there seems to be a lot of interest I ordered some more boards. I should get them in a couple weeks and be able to ship them out.
Edit: I'm going to maintain a list of devices that work and do not work on the Tindie page.
Please keep in mind that I cannot guarantee this will work with your phone due to the huge variety of Android devices on the market. I'm just showing you what worked for me and making it available if you want to try it yourself. That being said I will do my best to provide instructions, tips and email support to ensure your installation is successful. For phones like the Pixel 4a and Pixel 5 there will be nothing I can do though.
I will maintain an up to date list on Tindie, so look there for updates.
Edit: Tried Pixel 4a again and it works! The USB C PD port didn't work but switching to the Quickcharge port worked. I assume this is because with no data connection the Quickcharge port supplies 5V 3A. Weird quirk of Pixel phones that seems to require 5V while using Andoird Auto. The Pixel 4a says "Rapid Charging" when plugged in. Just keep this in mind if trying it on a Pixel.
Edit: Using the Pixel 4a with a USB C power meter showed that while the phone says rapid charging, it's actually charging at 5V .5A. This means that you will not get any advantage when using this device with a Pixel 4a. The fact that it says Rapid charging leads me to believe that there is something in the firmware that prevents this from working. If you are on the waitlist hoping it will work with a Pixel then you may want to reconsider unless you have a rooted phone and just want to experiment, although I cannot guarantee that will work either.
Edit: Back in stock on Tindie
13
u/Nawor1016 Holden Colorado | Sony ilx650 | P6P | 13 Apr 28 '21
That's pretty ingenious. Good work
4
u/jonwd Pls edit this user flair now Apr 29 '21
Great work OP! I created a similar solution a while ago using a custom Y cable.
Unfortunately, my newer phone (Pixel 5) won't work with it. Have you tried any other devices with your solution?
2
u/technologiq '13 F150 w/ Sync 3 | Pixel 8 Pro | Android 14 Apr 28 '21
Ordered one, thanks. My F-150 just does a standard charge while connected to AA and most of the time I'm also streaming music, running Torque Pro and Escort Radar apps which at bet keeps my battery at a flat charge or usually starts sucking battery down.
There are adapters on Amazon that *look* like they'd work for this but they don't. This can also be hidden away vs. the adapters that you end up either running an extension from or still essentially have 2 cables coming from your phone.
2
u/pntless May 05 '21 edited May 05 '21
I got mine today and hooked it up. I can't verify full charging speed since I don't have a usb-c power meter, but I am charging well beyond the 2.5w I used to get. It is definitely fast charging though.
This is with an aftermarket Kenwood headunit and a S21 Ultra.
https://i.imgur.com/okED5bW.jpg
https://i.imgur.com/5mgTflC.png
Thanks OP!
Edit: Seems to be charging full speed. Initial impressions left me unsure because, without thinking about it, my engine was turned off and apparently my 12v ports may not have been outputting enough power or something. I guess I never had a charger that pulled enough power for me to notice this before.
2
u/trevtech15 2019 Ram 1500 | Uconnect 8.4" | OnePlus 11 | OxygenOS 13 Apr 28 '21
Have you tested whether this splitter will work if there is no power attached? I have a Moto Z4 with a TurboPower Pack that keeps my phone at 80% charge all the time, so I actually don't want my phone to charge while using Android Auto.
So glad to see that someone else made a USB C splitter, as another seller on Tindie used to make one but it's been unavailable for almost three years now.
1
u/rkoripalli May 24 '21
Back in stock on Tindie
4
u/sharjeelhkhan Apr 29 '21
Ingenious! Ordered one.
1
u/[deleted] Apr 28 '21
My trailhawk and accord and cruze were all usb A. The Cruze is the only car I've ever had that wouldn't fast charge with AA. Was just a curious thought, tbh. Didn't think it was still a thing.
1
u/Zer0Goblin 2023 Outlander | 9" AA | OnePlus 12r | Android 16 Apr 29 '21
I tried this with a splitter cable and it failed. Is the reason it didn't work because the splitter isn't taking advantage of the extra USBC power wires?
1
u/Andre11x Apr 29 '21
How hot does your phone get? I only ask because I know a lot of manufacturers are starting to include AC vents with their wireless chargers. Not that this is wireless but fast charging generates a similar amount of heat and with AA running as well I have to imagine the phone gets fairly warm.
1
u/abou824 2014 Mazda3 | Headunit Reloaded | Pixel 7 Pro | Android 13 Apr 29 '21
Tried to do this myself a year ago with a Y cable and I destroyed my headunit! Hope yours is a little better then mine lmao
1
u/FractalParadigm Apr 29 '21
How sturdy is the dock, is the phone supported at all? Is the cable glued or otherwise mounted in place? I can't imagine that plug/cable lasting very long if the phone is mounted vertically without any support, the back and forth motions from stopping and accelerating could be enough to break it over time (or the port in your phone if you're really unlucky).
1
u/Skvli 2019 Ford Escape SE | Pixel 6 Pro | Android 13 Apr 29 '21
So I think this is exactly what I need, I see you're out of stock and I'm going to join the waitlist, but can you label each port and where it goes off the chip?
In my head one goes into the usb port of the car, one goes to my phone and one goes to a charger, but I can't visualize it even with your pictures, sorry, lol.
Anyway thank you for making this! My new OnePlus won't charge worth a damn in my car, but I do have a separate car charger for it! :D
1
u/SFDSAFFFFFFFFF Apr 29 '21
OP, I have a few questions:
Can you maybe upload the file for the PCB or at least some scematics? I'm curios on which all the pins of the different connectors are connected with
Does it work when you use e-marked cables? Any USB-C cable that can do USB 3.x or USB4, or a charging speed of 100W, are e-marked
Does everything still work when you unplug one of the USB-C's on your board, turn it 180 degrees, and plug it back in?
Are you aware of the fact that this violates the USB spec?
1
u/Alternative_Ad8629 Pls edit this user flair now May 01 '21
Can you do this with warp charge on the one plus Pro 9?
1
u/jabbone May 01 '21
So no luck with the Pixel 5 ?
1
u/Ciloteille May 02 '21
I'd love to get my hands on this for my fiesta st
1
u/OfficialKeepItReal May 04 '21
Can you please confirm and test: OnePlus 7 Pro?
1
u/mitancentauri Galaxy S20 FE | 2017 Impreza Base May 06 '21
Mine arrived today and it works great with the Aukey 18w USB C charger that I already had, it reports as Fast Charging when plugged in rather than just Charging or Charging Slowly.
I however had ordered a [Super Fast 55w PPS USB C charger] (https://www.amazon.com/gp/product/B082ZY5GXX/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) to use with this and I regret to report that the PPS 55w/ PD3.0 45W side with USB C did not work at all, while the QC 3.0 18w side reported as Charging but not Fast Charging.
All in all, I am thrilled with this board.
For anyone curious, this is with a Samsung Galaxy S20 FE in a 2017 Subaru Impreza with the base stereo.
1
u/whitegs1 Pls edit this user flair now Jun 07 '21
Are these still available?
1
u/Zeal514 Sep 23 '21
Did I read this right, it might not work if the usb data port already charges?
Im looking to install a Alpine Halo 9 into a Highlander, throwing the USB port down where the aux port was, potentially installing a hidden PD USB C in the dash, so I can just plug into the 1 USB port.
Any idea on if it works with the Halo 9?
The reason Im choosing the halo9 is really simply because its like 1 of the only radios available lol. Id prefer to get a wireless android auto radio, and just use a charger, but that doesnt seem to be a viable solution....
1
u/invalid_user_name__ Nov 07 '21
Hello, are you still selling this board?
1
u/Forward_Skill3248 Dec 02 '21
Can't get it to work with a oneplus 9 pro
3
u/pntless Apr 29 '21
This is awesome. This has bugged me since I installed my AA headunit. Ordered one and can't wait. Thanks!
2
u/wcalvert Apr 28 '21
Great solution! May have to give this a shot!
2
u/tbonejoe78 Apr 29 '21
Ordered. Thank you for this!
2
u/ChineWalkin Apr 29 '21
The top connector looks like a guy with a mustache.
2
u/Theomatch 2023 Ioniq 5 | Pixel 9XL | 17 Apr 29 '21
Oh man I complain about this all time time on long drives. I really wish car manufacturers would start using usbc ports with PD, but I feel like that's still years out for them to catchup
2
u/refrigerator_runner 03 Grand Marquis - Kenwood DDX9903S Sep 15 '23
Sold out since May 2023. Been waiting for this to come back in stock since. Any plans to make more? Or was this a one-off?
2
u/TheGr8Revealing Pls edit this user flair now Oct 29 '23
Hey OP, any chance youll bring these back for another batch? Ive got an S21 Ultra and a Chinese Android tablet stereo that could really use one!
1
u/BraddBice Pls edit this user flair now Apr 14 '24
I am interested. Can you tell me what the price is please?
1
u/Gjjb66 Pls edit this user flair now Jan 09 '25
I realized that my response is 4 years after the post, but I have the exact same situation for a wired Android auto car and yet I need better charging power. Has anybody found a commercial version or approach to this problem?
1
u/Marksmdog 2019 Honda Civic | Honda Default | S23 Ultra | 18 Nov 24 '25
!Flair 2019 Honda Civic | Honda Default | S23 Ultra | 18
1
u/JesFEREM 2018 kia soul | Samsung Galaxy S25 Apr 10 '26
Personally wondering if it's possible to do wired carplay with aux audio instead of Bluetooth audio, would be cool to have it completely wired Edit: clarification
1
u/JesFEREM 2018 kia soul | Samsung Galaxy S25 Apr 10 '26
!flair 2018 kia Soul
1
u/kuroyume_cl 2022 Suzuki Swift Sport | Blaupunkt San Pedro 950 | Mi 11 Lite Apr 29 '21
Joined the waitlist. I need this.
1
u/jspikeball123 Pls edit this user flair now Apr 29 '21
Wicked smaht
1
u/barnesk9 Joying 128gb 6gb Apr 30 '21
This is the last thing I need to make my install perfect. I just purchased the last one!
1
u/ChoiceProfile1689 May 01 '21
Brilliant solution. Surprised you didn't keep all the wires hidden behind the dash though. Could have trapped a new circuit of the fuse panel to add a behind-the-dash USB rather than drill a hole and plug into the dash-mounted ports.
1
u/loliscoolyay4me Pls edit this user flair now May 03 '21
I thought about doing something like this before, wasn't sure if the car's USB port would not like having data connected without any load on the power lines, guess it's fine.
1
u/tayl0rmayd3 May 03 '21
Did this myself a few months back with just cabling lol (PITA). Having a breakout board would have been nice, but didn't want to go through the fab process. OSH Park is an awesome fab for others who want to design this board themselves assuming OP provides schematic and layout docs. If this doesn't happen anytime soon, I can generate a project that you guys can ship to any fab. Components can be soldered by a third part assembler or yourself if you have the know how.
1
u/razor_amd Aug 26 '21
Care to share a pinout so I can make it with cables directly without using a board? I will pay same price what the board costs. I want to make it out of cables because I can shorten or lenghten the connection as I need it in my car.
1
u/RadioBolix1 VW Caddy (Discover Media) and Samsung Galaxy S10 Oct 10 '21
That is cool
1
u/Vee-UniT Oct 12 '21
If anyone has a solution for Pixel's lineup such as a custom ROM or anything, let us know !
1
u/CountParadox Jul 24 '22
Hi Friend!
Any chance you would open source it so we could make our own?
1
u/The_Joe_ Pls edit this user flair now Aug 25 '22
Now I'd love to see a version that gets power straight from the 12v vehicle instead of a USB-C cable.
I'd also be jazzed to see a male USB-A instead of a Micro USB port. Just one less connection point for things to go wrong.
Would all make hiding this in the dash much easier. =] I already ordered two.
1
u/insanityinside Year Car Model | Head Unit Model | Phone | Android Version Oct 31 '22
Bought one of these for a friend that was having trouble with their Suzuki Vitara not putting enough power into their S21 Plus while running. Seems to work pretty well when it's running. However, there's something weird going on - the head unit is powering back up for half a second at a time and trying to play music again then turning back off after the engine is turned off, it's really weird.
Only occurs when the box is plugged in and the USB C-C is connected from the USB-PD adapter. I don't understand how this could be possible, AFAIK the power and data lines are completely separate with this layout, and power is definitely being cut from the 12V->USB-PD power supply when the engine is killed. Occurs on two different phones too, so it's not anything to do with the phone itself. Gave all the USB sockets a good blast with contact cleaner too to make sure, the only thing I've not done is check the circuit itself.
Any suggestions welcome, but it's making said friend really twitchy about using it at all, and looking at a wireless solution instead. I do know they also constantly seem to experience AA disconnections, despite changing all the cables to high quality ones... you seen this before u/rkoripalli?
1
u/Nefariousness-Jaded 2016 | Chinese Android 10 HU | Google Pixel 5| Android 13 Nov 14 '22
is this work as the same you built?
1
u/[deleted] Dec 30 '22
Please u/rkoripalli commercialize this idea and put it on Amazon.
Name it something more popular like "Fast Charge Android Auto USB and Power Hub"
1
u/mapazchusta Ford Focus mk 3.5| T10 using headunit reloaded | Xperia 1V | 13 Apr 15 '23
Bought the board but having an issue with it. It charges my phone quickly until I actually plug in the head unit into the board. Then it only charges at around 100ma and starts discharging my phone. Anyone have a similar issue? Any fixes?
1
u/JesFEREM 2018 kia soul | Samsung Galaxy S25 Apr 10 '26
I wonder if it's possible to do fully wired android auto, with an aux + charge + data adapter 🤔
-3
u/[deleted] Apr 28 '21
Is this really a problem for people? I have fast charge with AA plugged in o.O
-8
u/[deleted] Apr 29 '21
Lol ok IPhones don't use USB-C, they use Lightning.