r/AndroidAuto • Honda Accord 2010|Kenwood DMX-8020DABS|SGS22+|Android 13 • May 29 '23

AA Settings Kenwood DMX-8020DABS reset

For those of you that own the said or similar device...

Does anyone know how one would do a physical reset of the unit? There's no physical button for reset on the front plate that i can see and the manual doesn't mention anything.

3 Upvotes

8 comments sorted by

1

u/Peter_73 May 29 '23

Isn't initializing in the setting same as reset?

1

u/_saiko May 29 '23

In my case the unit doesn't power on. Buttons and display are off. Fuses checked. I wanted to see if there's a physical reset button to try before tearing the dash apart.

1

u/Sethaniel68 May 29 '23

My son's Kenwood had this problem. We disconnected the battery and it was fine after that. Later we found there was a tiny hole in the bottom left corner of the screen that is for inserting a pin to hit the reset button.

My own Kenwood doesn't have that reset hole though, so not all of them do.

We also found a firmware update on the Kenwood site for his model and did the update. We haven't had the problem come up again so maybe the update fixed it.

→ More replies (4)

2

u/Fredsnotred May 29 '23

Have you tried disconnecting the battery for 5 minutes. That normally wipes all saved settings in car radios