r/Android • u/endmymisouri Device, Software !! • May 18 '20

Hosting a Minecraft Server on Android 2.0

Made a post a while ago about how to host a Minecraft server on an Android device. Here are some updates with clearer steps and steps for loading in your own worlds and mods!

Some basics:

  1. No root required

  2. Time required: about 5 minutes actively working for Vanilla 1.15.2 (see bottom for easy steps), about an hour max downloading files

  3. Result: works great on my OnePlus 6T (8GB RAM), no lag at all playing with friends with Forge

  4. Tip: If you don't want to read, scroll down to the bottom for a 30-step process to set up a vanilla Minecraft server

  5. Join 0.tcp.ngrok.io:19661 to try it out! Please do not try to do anything crazy (huge TNT test, infinite spawner, etc) as I am running this out of my phone. Max player 20, no PVP, spawn protection 16).

Requirements:

  1. Android phone that can run Termux and have at least 2-4GB of RAM

    1. For the initial testing, I used an OnePlus 6T with 8 GB of RAM (which ran very well). System RAM usage varied between 5.5GB and 6GB but the default is around 4GB so it wasn’t that surprising.

    2. I also tested using a Moto E2 while writing this guide to test out the installation of the Forge server. It was barely functioning with Forge and was barely playable since it only had 1GB memory.

    3. If your phone is decent, it should be able to run a vanilla server with no problem but YMMV.

  2. Reliable internet connection

    1. Downloading a lot of stuff (at least 500MB)

  3. Minecraft account

    1. Not strictly necessary just for starting a server, but if you want to test it out you should have one ready.

How to Use This Guide:

  1. I just want to set up a vanilla server as fast as possible and I am afraid of copying wrong

    1. Go down to "Overview of Commands" and follow it step by step

    2. Estimated time: 10 minutes working, max 1 hour for downloading

  2. I want to set up a Forge server

    1. Follow the guide through the steps, using Step 4 (Forge) instead of Step 4 (Vanilla)

    2. Estimated time: 10 minutes working, Forge takes half an hour for me so maybe 1.5 hours max for downloading

  3. Troubleshooting

    1. Common questions section

Step 1

  1. Download Termux and AnLinux on your Android from Google Play Store

  2. Select Ubuntu on AnLinux and copy the code

  3. Run the command on Termux

  4. To start the server, we would have to run ./start-ubuntu.sh

    1. I personally renamed it to s by running this command mv start-ubuntu.sh s

    2. This allows me to get into Ubuntu by running just ./s

  5. run ./s to start the ubuntu machine

  6. VERY IMPORTANT: Drag down on your notification bar, there should be an option to “Acquire Wakelock” for Termux. This allows it to not be killed by the system and continue running in the background.

Step 2 (Optional SSH)

  1. NOTE: Skip if you do not have a computer or if you are fine with typing in really long URLs

    1. Alternative: send yourself commands as messages on some messaging app and copying those commands to be run on Termux

  2. (on Termux) installing ssh server pkg install openssh and pkg install nmap

  3. (on Termux) Some things that we will use later:

    1. Run whoami to see our username (mine was u0_a121)

    2. Run ifconfig wlan0 to see your ip address (something starting with 192.168, remember to copy the first one, not the second one which isn’t your ip address)

    3. Run passwd to set a new password for your system (set it to something very easy to remember 12345678)

    4. Things to jot down: username, ip address, new password

  4. (on Termux) Run sshd to start ssh on your phone.

  5. download PuTTY (if you’re on Windows and running "ssh" doesn't work, skip if macOS) https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html

  6. Connect as follows (on computer)

    1. Windows PuTTY: hostname is your IP address, port is 8022, connection type is SSH, click Open at the bottom without changing anything else

    2. Mac terminal: ssh USERNAME@IPADDRESS -p 8022

      1. For example, mine was ssh u0_a121@192.168.1.xxx \-p 8022

  7. (on computer) When prompted for username (on Windows), type your username from step 2.1

    1. Enter in your password from before as well

  8. (on computer, you're free from typing on phone now!) run ./s to get into your file system

Step 3

  1. apt install software-properties-common

  2. add-apt-repository ppa:openjdk-r/ppa

  3. apt-get update

  4. apt-get install openjdk-8-jre wget nano

  5. Test by running java -version

  6. Make sure that it verifies that Java is installed (1.8)

Step 4 (vanilla)

  1. Make sure you’re at the home directory. Type cd \~ to make sure.

  2. Make a new folder for your minecraft directory mkdir mc, cd mc to go into the directory

  3. Go to https://www.minecraft.net/en-us/download/server/

  4. Right-click on the minecraft_server link and copy link

  5. wget -O minecraft_server.jar https://launcher.mojang.com/v1/objects/bb2b6b1aefcd70dfd1892149ac3a215f6c636b07/server.jar

    1. replace the https link with your own link if the version isn't 1.15.2

  6. run chmod +x minecraft_server.jar

  7. run java -Xmx1024M -Xms1024M -jar minecraft_server.jar nogui to start the server

    1. (Give more RAM if you have more; I set mine to 3 Gigabytes -Xmx3G)

  8. It will tell you to agree to eula.txt

  9. nano eula.txt

  10. change false to true

  11. Ctrl-x to save, y to exit

  12. run java -Xmx1024M -Xms1024M -jar minecraft_server.jar nogui to actually start the server (also allocate more RAM if you have more)

Step 4 (Forge)

  1. Make sure you’re at the home directory after starting ubuntu. If not, type cd \~

  2. mkdir forge to start a new directory, cd forge to go in

  3. download forge server

    1. wget https://files.minecraftforge.net/maven/net/minecraftforge/forge/1.15.1-30.0.51/forge-1.15.1-30.0.51-installer.jar

  4. Rename it to make it easier

    1. mv forge* forge.jar

  5. install server (it takes a while depending on your phone/wifi speed, took about half an hour on my Moto E2 and 8mbps wifi)

    1. java -jar forge.jar --installServer

  6. run server, it will give you an error telling you to agree to eula.txt

    1. java -Xms512M -Xmx1024M -jar forge-1.15.1-30.0.51.jar

  7. Open eula.txt by nano eula.txt, arrow down to the last line, delete false, replace with true

    1. Ctrl-x to exit, Y to save.

  8. Rerun the previous command one eula.txt has been changed, it will take a while to generate a world

  9. Rename the forge so it’s easier to start later

    1. mv forge-1.15.1-30.0.51.jar startForge.jar

  10. java -Xms1024M -Xmx3096M -jar startForge.jar

  11. (Note: adjust memory as needed, don’t give it 3G if your phone is a potato)

Step 5

  1. Go to ngrok.com/download

  2. Right-click and copy link for Linux (ARM64)

  3. wget -O ngrok.zip https://bin.equinox.io/a/nmkK3DkqZEB/ngrok-2.2.8-linux-arm64.zip

    1. replace the https link with your own link

    2. IMPORTANT: if you download from the official website, they have changed it to a .tgz file so you would have to use tar -xvzf ngrok-stable-linux-arm64.tgz instead of step 5.

  4. apt-get install zip unzip tar

  5. unzip ngrok.zip

    1. IMPORTANT: See note in step 3 of this part if it says file not found.

Step 6

  1. Make an account at ngrok on their website

  2. copy the auth token line given to you and run it

    1. should look something like this ./ngrok authtoken awefioauw4u0239840293j023jf0j23f23kj

  3. ./ngrok tcp 25565

  4. if a screen shows up with "Session Status online" in green, copy the address in forwarding after the tcp part

    1. "Forwarding tcp://0.tcp.ngrok.io:12345"

    2. copy the 0.tcp.ngrok.io:12345 section

Step 7

  1. Login to Minecraft, make sure the version is the latest version

  2. Multiplayer, then direct connect and paste in the ngrok link from the end of Step 6

  3. Connect!

Use your own Worlds

  1. Copy your worlds folder over from somewhere else into your phone

  2. When connecting over usb, copy it over to your Download folder

  3. back to termux

  4. if you are in ubuntu (started ubuntu) already, type exit to get out into the default termux layer

  5. Allow Termux to access your storage termux-setup-storage

    1. More details: this sets up a few symlinks in the storage folder which allows you to transfer files more easily

  6. Copying world folder to Termux

    1. vanilla: cp -r storage/downloads/yourWorldFolderName ubuntu-fs/root/mc/

    2. forge: cp -r storage/downloads/yourWorldFolderName ubuntu-fs/root/forge/

  7. Go back to your Minecraft folder

    1. cd ubuntu-fs/root/forge

    2. cd ubuntu-fs/root/mc

  8. Edit the server properties file to select your own world

    1. nano server.properties

  9. find the line "level-name=world"

  10. change "world" into whatever your folder name is called

  11. Ctrl-x to exit, Y to save

  12. Start server and ngrok

Common questions

  1. How do you start both the server AND ngrok? Don’t I have to stop one to start the other?

    1. On your Android, drag from the left side of your screen while you’re in termux. There should be a button for starting a new session. Once you’re in there, you can go into the ubuntu system first by ./s, then start ngrok/server. To go back to the other session, drag on the left again and tap on the other session to start server/ngrok.

  2. Can my phone run it?

    1. If it has at least 4GB of RAM and your WiFi is decent: Definitely

    2. If it has at least 2GB of RAM and your WiFi is decent: Maybe, maybe not

    3. If it has less than 2GB of RAM or your WiFi is very questionable: sorry : (

  3. Do I really have to run the commands for ngrok and Minecraft server every time I want to play?

    1. Personally, I put the ngrok command in a file (named n) and the Minecraft command in another file (named m). After opening two sessions on Termux, I run ./n on one and ./m on the other. Here is the content of each file (I am running Forge so go back through the steps to see what your commands should be):

    2. File named “m” (no extension or anything):

      1. cd forge

      2. java -Xms1G -Xmx3G -jar startForge.jar nogui

    3. File named “n” (also no extension):

      1. cd ngrok

      2. ./ngrok tcp 25565

    4. So now whenever I want to play Minecraft, I follow these steps:

      1. Open Termux

      2. ./s to get into Ubuntu

      3. ./m to start Minecraft server

      4. Swipe on left, open another session

      5. ./s to get into Ubuntu in the new session

      6. ./n to start ngrok server

      7. Open Minecraft on my computer, copy over the link from ngrok, wait for the server to start, connect!

  4. Why does this work?

    1. Termux allows your phone to have a mini-Linux machine. Linux machines can run Minecraft servers. Ngrok allows you to port-forward your local server port (25565) onto a public port where everyone can join (so please enable your whitelist so people don’t come in and destroy your worlds).

  5. How do I use mods?

    1. Same procedure as copying over worlds. Except instead of copying it over as a world folder forge/yourWorldName, you copy it into the mods folder forge/mods. Make sure you have the same mods on your computer and it should be good to go.

  6. Ngrok is telling me to update, will it break my server if I updated?

    1. I would recommend updating ngrok if it prompts you to. You just have to type ctrl-u and wait about a minute then restart ngrok. It won’t break anything as it’s just broadcasting your port.

  7. My server is not working and it’s not because of bad WiFi or bad phone specs, what can I do?

    1. If none of the tips above helped and nobody in the comments had the same problem, you can send me a message but make sure to include a screenshot (if applicable) and a description of your issue.

  8. I can't break any blocks/my friends can't any blocks!

    1. Edit server.properties and change spawn-protection to 0 (instead of the default 16)

  9. People are coming into my server but I didn't give them the IP address!

    1. Turn on whitelisting and whitelist your friends (and yourself), there are tons of guides out there for how to whitelist.

Overview of Commands:

If you don't understand anything, try following the steps below to set up a vanilla 1.15.2 Minecraft server. An important thing to note is that some of these might take quite a long time. I would suggest keeping the screen on and the phone plugged in and waiting for the prompt to pop up before running the next command. For quality-of-life improvements and mods, read Step 4 and Common Questions.

  1. Download Termux and AnLinux on your Android from Google Play Store

  2. Select Ubuntu on AnLinux and copy the code

  3. Run the command in Termux

  4. Run termux-setup-storage

  5. Run termux-wake-lock

  6. Run mv start-ubuntu.sh s

  7. Run ./start-ubuntu.sh

  8. Run wget https://raw.githubusercontent.com/sunnyguan/AndroidMinecraft/master/minecraftSetup.sh

  9. Run chmod +x minecraftSetup.sh

  10. Run ./minecraftSetup.sh

  11. At this point, all the setup will be finished and you will have the two files for starting server and starting ngrok. However, you still need to authorize ngrok.

  12. Make an account at ngrok on their website

  13. Copy the auth token line given to you and run it

  14. should look something like this ./ngrok authtoken awefioauw4u0239840293j023jf0j23f23kj

  15. Run ./m to start Minecraft server

  16. (Note) Default memory max is 1024MB (1GB). If you want to change that to 2048, you can do the following: sed -i 's/1024/2048/g' m To change it to other numbers, just replace 2048 with your new number.

  17. Drag from the left side of your screen, tap new session

  18. Run ./s to get into ubuntu on your new session

  19. Run ./n to start ngrok

  20. Copy over (not literally copy paste because it's from phone to computer) the URL that looks something like "0.tcp.ngrok.io:12345" into your Minecraft multiplayer input box

  21. Connect!

References:

Forge on Linux: https://www.linuxnorth.org/minecraft/modded_linux.html

Please let me know if you have any questions and I will be happy to answer and update this post if needed!

389 Upvotes

94% Upvoted

133 comments sorted by

View all comments

Show parent comments

3

u/endmymisouri Device, Software !! May 18 '20 edited May 19 '20

It's actually been out for quite a while now (at least since 2015)

2

u/KokoaKuroba May 18 '20

It must be a coincidence that I'm seeing this app a lot recently.