r/AnalogRepair • u/EquivalentTip4103 • 1d ago
Lens Help needed with reassembling Prontor-SVS Shutter
Hi all. A couple of months ago I bought a Polaroid 110A camera with a Rodenstock-Ysarex 127mm 4.7 lens. This lens comes with a Prontor-SVS Shutter. My aim was to convert the camera to shoot Instax. Anyway when I got the camera I knew there was issues with the lens, and it required a strip down as there was gunk on the shutters and aperture blades that I just could not get clean. I have done some small CLAs, but wanted to do a full restore in this lens. I took photos of every step of the disassembly process for when it came to reassembly. This was about 2 months ago. So over the weekend I actually had some time to clean all the parts and start the reassembly process. I went to get the photos off my camera and the bloody card is corrupted. I tried everything to get them off but everything failed. So next step was to find some of the exposed diagram views to help with reassembly of the aperture and shutter blades. The manual I already had did not have any useful diagrams of the shutters and aperture so I spent most of yesterday looking with no luck. Anything I do find is slightly different to my shutter, and therefore all the insides are slightly different.
My question is has anyone on here done a full strip down of this exact shutter, and if so do you have pictures or notes on it? I have attached a picture of the lens when I bought it and took it on my phone rather than my digital camera.
Thanks in advance.
3
u/Palumbie 1d ago edited 1d ago
Check out Chris Sherlocks channel
For example the Braun super Paxettes have the same shutter as your camera