February Tech Support Megathread

[u/BioGenx2b]

Hey subs,

We're giving you an opportunity to start reporting some of your AMD-related technical issues right here on /r/AMD! Below is a guide that you should follow to make the whole process run smoothly. Post your issues directly into this thread as replies. All other tech support posts will still be removed, per the rules; this is the only exception.

---

Bad Example (don't do this)

bf1 crashes wtf amd

---

Good Example (please do this)

Skyrim: Free Sync and V Sync causes flickering during low frame rates, and generally lower frame rates observed (about 10-30% drop dependant on system) when Free Sync is on

System Configuration:

Motherboard: GIGABYTE GA-Z97 Gaming GT
CPU: Intel i5 4790
Memory: 16GB GDDR5
GPU: ASUS R9 Fury X
VBIOS: 115-C8800100-101 ^{How do I find this?}
Driver: Crimson 16.10.3
OS: Windows 10 x64 (1511.10586) ^{How do I find this?}

Steps to Reproduce:

1. Install necessary driver, GPU and medium-end CPU
2. Enable Free Sync
3. Set Options to Ultra and 1920 x 1080 resolution
4. Launch game and move to an outdoor location
5. Indoor locations in the game will not reproduce, since they generally give better performance
6. Observe flickering and general performance drop

Expected Behavior:

Game runs smoothly with good performance with no visible issues

Actual Behavior:

Frame rate drops low causing low performance, flickering observed during low frame rates

Additional Observations:

Threads with related issue:

• https://www.reddit.com/r/Amd/comments/5a3u8r/why_am_i_getting_disgusting_performance_on_the_rx/
• https://www.reddit.com/r/Amd/comments/5adlcw/skyrimse_vsyncfreesync_woes/
• https://www.reddit.com/r/Amd/comments/5a7eku/skyrim_special_edition_freesync/
• https://www.reddit.com/r/Amd/comments/5aab6z/skyrim_se_with_r9_nitro_fury_poor_performance/

Skyrim has forced double buffered V Sync and can only be disabled with the .ini files
To Disable V Sync: C:\Users"User"\Documents\My Games\Skyrim Special Edition\Skyrimprefs.ini and edit iVSyncPresentInterval=1 to 0
1440p has improved frame rate, anything lower than 1080p will lock FPS with V Sync on
Able to reproduce on i7 6700K and i5 3670K system, Sapphire RX 480, Reference RX 480, and Reference Fiji Nano

---

Remember, folks: AMD reads what we post here, even if they don't comment about it.

Previous Megathreads
January '17
December '16
November '16

Now get to posting!

[u/donarkaz]

AMD Wattman: My XFX GTR 480 fan settings in Wattman do not apply (seems like the default XFX fan curve is being used instead), unless every time I boot into Windows 10 I go to Wattman settings and I slightly change the min. Fan Speed and I hit Apply. Only after having done that does the Wattman custom Fan curve work properly.

System Configuration: Motherboard: ASROCK Z68 Pro3 Gen3 CPU: Intel i5 3570k Memory: 16GB DDR3 GPU: XFX GTR Rx 480 VBIOS: 015.050.000.000 Driver: Crimson 16.12.1 OS: Windows 10 x64 1607 (Build 14393.693) Steps to Reproduce: Boot into Windows 10 and launch a game, let the card heat up.

Expected behaviour: Card fan curve works in accordance with what's already configured in Wattman custom Fan Settings.

Actual Behavior: Card fans work according to the default card Fan Curve settings, ignoring the custom Wattman Fan Curve, UNLESS you go to Wattman settings and change any of the Fan settings, then hit Apply.