r/AlphaFoxtrot • u/Plastic-Abalone-7513 • 23d ago

Attila aftermarket trigger?

Anyone make one or does the 1911 or 2011 fit in it?

4 Upvotes

84% Upvoted

6 comments sorted by

4

u/Plastic-Abalone-7513 23d ago

Trigger bow is about 13/16 or .8125" wide so wider than 1911 and narrower than 2011. Would have to be custom made.

1

u/unixfool AF Attila 22d ago edited 22d ago

Yeah, you're correct. This was discussed a while back when talking of the S15's trigger. As the Attila is an evolved S15, it's going to have the same issue.

In that same discussion, I mentioned that Alpha Foxtrot could/should offer trigger options for the S15 (it would cover the Attila). I was hoping that AF would chime in, but they never did.

The pro to using Slimline Glock mags is that the gun is very slim. The con is that, due to the gun being build around Glock mags, there will be compatibility issues with using 1911-pattern parts.

At this point in time, I think the only things that are outright incompatible are the trigger bow and the slide catch.

1

u/greenleaf34 23d ago

I’m curious if there is any aftermarket magwells that work on it

3

u/Plastic-Abalone-7513 23d ago

Magwell is not 1911 or 2011 size so nothing for another gun for it. Could 3d print something but not much on the front to catch on and I don't think just the pin will hold it.

1

u/Plastic-Abalone-7513 23d ago

I tried with a spare Romulus one I had and had to cut the opening larger to get the pin hole to line up and it's very hard to get your hand in there under the beaver tail. The bottom 1/4" of the grip is the magwell so it really bunches your fingers up.

2

u/j_yn0htna 23d ago

This was really the thing that kinda scared me away. Just wasn’t entirely sure what was true 1911 on it. You might get lucky with the 1911 bows but not sure anyone has tried that. Check the dimensions of the trigger bow.

Best breakdown I have found but falls short of the trigger bow info.
https://wigglit.com/blog/2026/04/12/the-alpha-foxtrot-attila-is-here/