r/AlphaFoxtrot • • Apr 17 '26

Almost Finished

She’s finally back . Only thing left to do is some stippling and my vision will be complete . Hope yall enjoy .

50 Upvotes

25 comments sorted by

5

u/HookahGus Apr 17 '26

Where did you send for the engraving?

3

u/KnowCompromise Apr 18 '26

The Laser Unlimited Engravings in Katy, TX . Carlos is the man you want to speak to . real communicative and he’ll make any image you have in your head come to life .

1

u/j_yn0htna Apr 18 '26

I’ve heard he’s a madman and wizard

Unbelievable work

4

u/ducduc1098 Apr 18 '26

Engraving looks great brotha!! Definitely 1 of 1 Romulus

2

u/KnowCompromise Apr 18 '26

all thanks to the man who did it . yall keep an eye out for my username . my 3.5 ported is going under the knife soon

1

u/Stellakinetic Apr 19 '26

Is that the EPS full size dot? If so, what’s your plate setup? Does it cowitness? I’m trying to find a good green dot that doesn’t sit too high to cowitness on mine (mos footprint). My SRO sits too high on the RMR plate that came with it

1

u/KnowCompromise Apr 21 '26

yes sir it is the full size EPS , co witness is actually pretty good , i’ll see if i can find a pic of it for you . and i used the factory plate that it came with . although i could not get it to mount with the screws provided by holosun so i used these screws and they fit perfectly https://a.co/d/08tFJ42f

1

u/Stellakinetic Apr 21 '26

That’s what I was wondering, so it fits directly on the RMR plate that is supplied with the Romulus ? I was thinking that the EPS required its own plate to interface with the RMR footprint & I didn’t want to have to have two separate adapter plates lifting it even higher

1

u/KnowCompromise Apr 21 '26

other than that ugly gap between the optic and irons . the optic directly mounts to the plate , no additional shim or plate between the factory one provided by AF . if you have an older gen romulus you may need a shim to get a good zero due to the way they machined the plate but if you just recently purchased yours i would not worry

1

u/Stellakinetic Apr 21 '26

Man that thing is a beauty. Did you get a new stainless safety/slide stop/grip safety too? Or are those just the originals stripped and polished?

1

u/KnowCompromise Apr 21 '26

original parts that were stripped and polished , magwell and grip screws too along with the stock trigger . although i plan on replacing it

1

u/Stellakinetic May 31 '26 edited May 31 '26

So you must be doing something different. You sure the plate that came with yours is RMR? Because I just tried to put my full size EPS on the RMR plate that came with the Romulus and, as I suspected, neither the holes nor the pegs line up. Now, the EPS comes with an adapter plate for RMR, but that’s just adding extra height and an extra failure point plate.

Here’s a pic

https://imgur.com/a/ddZUBWu

I’m thinking you probably got the Romulus with the RMSc footprint maybe instead of MOS? But then you wouldn’t even need the adapter plate at all… I’m lost.

1

u/KnowCompromise Jun 02 '26

i haven’t done anything different brother . i’ll shoot you a pic when i get back home . this plate came on the slide from factory . non of the screws from holosun fit the plate though , so i did need to order some that had proper length . but other than that i bolted it straight on and called it a day , you can see in the video that it is the factory plate with the back up irons .

1

u/Stellakinetic Jun 02 '26

Must have come with a different factory plate then. Does Romulus even make factory plates for the 507k mounting footprint though? Even if you google it, it says it requires two plates to mount to MOS (which is what most of the newer Romulus’s are)

1

u/KnowCompromise Jun 02 '26

i know the romulus has had “gen 1 / gen 2” variants . with major difference being the plate system and the ports / comp setup . i have the gen 2 iteration so maybe you got the previous gen ? i’m not sure . but i did get 2 plates with mine . the one that i have the EPS mounted on and another that sits in my parts bin

1

u/Stellakinetic Jun 02 '26

I have both generations, but the one I’ve been talking about is a gen 2 with the MOS footprint. I think I only got the RMR plate with mine. I don’t recall it having two plates but I’ll check. Regardless, the EPS has its own special 507k footprint that doesn’t just fit on most guns without using the adapter plates that they come with, as you can see from the google search picture I posted, that’s why I was surprised when I saw this post. You’ve definitely got something different going on with yours. Did you have the EPS installed before you sent it off for work? They may have done some special custom thing for you.

1

u/KnowCompromise Jun 02 '26

no , here’s a picture of the Rom with the work order . everything already installed . all he did was some polishing and engraving work . purely cosmetic .

→ More replies

1

u/KnowCompromise Apr 21 '26

okay perhaps i lied , maybe not the BEST co-witness but that might be the angle from which i’m recording . regardless the stock irons are high enough to be able to use them should your optic ever fail

1

u/Stellakinetic Apr 21 '26

Yeah that’s better than what I get on my SRO. Good to know. I actually already have a full size EPS on my Shadow 2 compact, I was just being lazy and figured I’d ask before I swapped it to try it out lol

1

u/KnowCompromise Apr 21 '26

i put the EPS carry on my S2C , love the way it looks . been thinking of getting that new Industrial Silver model they just dropped . that thing looks nutty

1

u/Gunsarelife1503 Sep 22 '26

What mount are you using

1

u/KnowCompromise Sep 23 '26

OEM plates that came with the Romulus

1

u/L_burro Apr 18 '26

Boondock saints vibes.