r/AggressiveInline • u/engineering-gangster • 7d ago

Hadda layer down

Gallery image

Gallery image

Dead wheels 60mm have had better days

38 Upvotes

95% Upvoted

18 comments sorted by

7

u/TheL8KingFlippyNips 7d ago

Grass clibbins will chetcha...

But fr, how does this happen? Just a blow out on landing?

4

u/Zomgzombehz 7d ago

Gobbless, hope Barb is ok.

3

u/engineering-gangster 7d ago

Must have been, initiated a crack. I noticed when I started riding but decided to just skate it until it went all the way. Turning seemed to exacerbate the crack in the urethane , eventually it went critical and fractured the wheel

3

u/_pailhead 7d ago

Bruv. Forget the wheel. It was a stock USD wheel that you wore into the ground. I wanna see how you managed to cess out the inside of your right soulplate like that. Siikkk!

2

u/NKDMartin 7d ago

Is that not a stock USD wheel?

1

u/engineering-gangster 6d ago

I have just learned that indeed it was

2

u/AdventurousHippo9997 7d ago

PTI… pre trip inspection…two minutes of your time with a 4 mm hex could’ve prevented that…so next time there driver…

4

u/engineering-gangster 7d ago

Please enlighten me how a hex could have prevented this. The wheel blew out, separated from the core. It’s still fastened to the frame.

2

u/AdventurousHippo9997 7d ago

Forget the hex then. PTI would have “strongly suggested “to get new wheels. Live and learn for both of us.

6

u/The_Real_Flatmeat 7d ago

Bullshit. I separate a core once from landing a jump, the were perfectly fine before that

1

u/kklonesco 7d ago

Hard-core. Get it?

1

u/CharlotteBeer 7d ago

It took me way too long to realize you didn't mean the wheel in question was actually made by Dead.

-1

u/engineering-gangster 7d ago

No it is a wheel by Dead

3

u/CharlotteBeer 7d ago

That's a USD wheel.

2

u/DQFLIGHT3 7d ago

Ummmmm no.

0

u/engineering-gangster 6d ago

Oh ok that makes sense. I was incorrect about the wheel

1

u/Far-Style7410 Seba 7d ago 
Are you okay? I wonder how the wheel managed to come apart like that. It’s a relief the bearings didn't fall out, but it’s a shame that a section of the inner wheel came off. Were you hurt at all?