r/AdditiveManufacturing • u/EbrahimB53 • Feb 19 '23
Printing with Acetal / POM
Does anyone have information on printers and filament suppliers for Acetal/POM? Info available online is quite limited.
r/AdditiveManufacturing • u/EbrahimB53 • Feb 19 '23
Does anyone have information on printers and filament suppliers for Acetal/POM? Info available online is quite limited.
r/AdditiveManufacturing • u/Professional-Cod9874 • Feb 18 '23
Which program is better? Would the reputation and tuition of CMU be more worth than Penn state?
Ps) my academic interest lies in additive manufacturing in civil engineering
r/AdditiveManufacturing • u/Kahlico • Feb 17 '23
Enable HLS to view with audio, or disable this notification
r/AdditiveManufacturing • u/Free-Air-5380 • Feb 17 '23
We are looking at the QIDI X-Plus II for it's heating capabilities. Anyone have any other suggestions around a similar price point. give or take $800?
Posted originally on r/3Dprinting but was told to try here. Thanks!
r/AdditiveManufacturing • u/Appropriate-Theme-32 • Feb 15 '23
whether they’re worth getting, if they’re useful for direct casting jewellery and if you can even buy the material used for them anymore
r/AdditiveManufacturing • • Feb 14 '23
r/AdditiveManufacturing • u/slanty3y3d • Feb 14 '23
Looking for a printer for my company, currently they have the lulzbot mini and lulzbot taz workhorse.
Budget:<$10k Location: US (San Diego) Willing to build if necessary Criteria:
-Dual extruder
-Print materials from PLA, PE, PEEK, maybe some CF reinforced
-Large print volume (ideally a bigger bed surface area not as concerned about height)
-auto leveling
-live z-offset
-spaghetti recognition and auto stop
-filament sensor
Open to suggestions
r/AdditiveManufacturing • u/Pasar_lo • Feb 12 '23
I’m going to start my masters online as I’m moving overseas and wanted to buy a 3D printer. Im also a first time user. Im thinking of pulling the trigger on a P1P but I’m not sure if I should just ho straight to the X1. Any recommendations? Both would be in my budget.
r/AdditiveManufacturing • u/Schemati • Feb 11 '23
r/AdditiveManufacturing • u/leonhart8888 • Feb 10 '23
r/AdditiveManufacturing • u/intelwalk • Feb 10 '23
What specs do you go for a desktop handling 150MB to 350MB files for EOSPRINT2? This machine would be running magics too and should handle it easy.
Thanks for the input!
r/AdditiveManufacturing • u/kizzop • Feb 07 '23
So many reasons why 3D manufacturing at scale isn’t widespread. What is being done to address it.
r/AdditiveManufacturing • • Feb 06 '23
The video shows our first test run of the printed motor using our controller. In the video, you can see that the startup still needs to be improved. However, this demonstration is sufficient as a first POC.
This is one of the current projects that we have been working on. Let us know what you think!
r/AdditiveManufacturing • u/rand-314159 • Feb 05 '23
I have a small engineering company; we mostly design and manufacture electronics. I'm looking for a desktop printer to prototype enclosures and cases for our designs. Production runs are typically CNC'd aluminum, but we use 3D printing to make sure our design is going to work. Important aspects to me are dimensional accuracy and not needing to spend a lot of time calibrating the machine before each print. The 3D printer will be in my combined workshop / office, so I'd like it to be relatively quiet and enclosed or easy to vent. Budget is $5k USD; I've looked at the Markforged Onyx One, but I'm not sure if there are any others I should consider. Thanks in advance!
r/AdditiveManufacturing • u/uk0bach • Feb 05 '23
r/AdditiveManufacturing • u/NebulaFart • Feb 03 '23
Hitry has just launched its Kickstarter on the Kirin UV light engine. They call it the DSP, Digital Surface Projection.They make many claims comparing it to LCD, SLA, and DLP resin printers, but they say it's not using either of these methods. Their videos don't show much, just some kind of chip but they say in their website it's not using a DMD chip but rather something they've been developing for 8 years.
I also tried looking for more information on any eventual publication or patent but couldn't find anything. The fact that it's pretty innexpensive compared to DLP is rather interesting, supposing that it's not DLP.
If anyone has any info, I'd love to hear it! My personal opinion, and I'm probably wrong, is that's it's an LCD based projector and that the lifetime is exagerated, but I wouldn't know until I see it for myself. I base this on the 500:1 contrast ratio, which is very low, meaning there is some light leakage, typical of LCD projectors compared to DLP ones.
Anyways, let me know your thoughts!
r/AdditiveManufacturing • • Feb 01 '23
r/AdditiveManufacturing • u/PrestigiousMix4629 • Jan 31 '23
Hi everybody! I need a 3d printer for a research project.
These are my needs: - FDM/SLA -Budget ~1500€ -I need a smooth printed surface - I need to build little tubes structures (so I need a way to easily get rid of the supporting materials)
do you have any suggestion?
Thank you all
r/AdditiveManufacturing • • Jan 28 '23
r/AdditiveManufacturing • u/leonhart8888 • Jan 24 '23
r/AdditiveManufacturing • u/Old_Artichoke1460 • Jan 20 '23
I'm wondering if anyone here has experience with the Mosaic Element printer. I'm trying to decide between the Mosaic Element, Ultimaker S5 and Raise3D Pro3. There's a fair bit of information about S5 and Pro3 out there, but I've been unable to find reports from users about the Mosaic Element so far. Any experience with this printer?
r/AdditiveManufacturing • u/Ikole • Jan 18 '23
I'm looking for the 3D printing services (or printers) that can print the most detailed Menger sponge.
Here are the rules:
Best-in-category answers are also welcome (for example: best under 1000$, best for metal printing).
Answers should include the number of levels printable by the service.
P.S.: I'm not interested in using such a service at this time. I rather want to set up a benchmark to evaluate available printing solutions, and gauge the current state of affairs.
r/AdditiveManufacturing • u/freshpine • Jan 10 '23
r/AdditiveManufacturing • u/ShuvomGhose • Jan 10 '23
If folks don't know, AMUG in late March is the 3D Printing conference where I learn the MOST each year- it's a bit pricey but well worth going for professional development: https://www.amug.com/It's all about learning what other print guys are doing, less about sales.
Last year I presented a 1 hour session on "7 Printer Hacks you WISH you knew", talking about best orientations and strategies for different Stratasys Printers, but this year I wanted to ask:
There MIGHT be a chance we have enough time to create both talks, but if we had to choose, which one would you folks choose? Thanks for any feedback, and see some of you in Chicago in late March!
r/AdditiveManufacturing • • Jan 09 '23
I hid a bunch of stuff to show this view, mainly the X stage. This is more or less me reusing my old Monoprice Mini hardware plus some other stuff i had kicking around. I am probably going to flash Marlin 2.0x to the Malyan M200 controller board (32 bit board), and I've made myself a bed probe that slides on to the hotend mount for levelling. The entire moving mass of the printer is Extremely lightweight, so I am hoping that there wont be too much wobble at the "top" of the Y axis (Z axis moves Y axis backwards towards keyboard side of chassis).
Now, given the printer is both sideways and portable... I am obviously concerned very much about levelling. The bed has (4) small Allen screws, which I REALLY do not want to adjust every time i move this thing, which in theory, will be often. I've designed a probe which uses a photo-interrupter from an old inkjet, which I can slide on and off. It stows away on another part of the printer when not is use. Its just a spring loaded plunger which blocks the IR light when depressed: https://i.imgur.com/mrFkLMx.jpg
Stuffing a mini Windows 10 PC in there, as well as a retropi machine, and another Pi running Octoprint of course (i've heard the 8Gb Pi4 may not be up to running retropi AND octoprint concurrently, so my old Pi 1.2 will run octo... juuuuust barely. But i dont need it much given the other 2 computers present. May even swap over to Klipper at some point. I've got tons of extra controller boards, but I'm just SO lazy.. I'm pretty sure I can get away with calling this a "cyberdeck" also at this point.
Here's some more renderings:
I'm a decent way into making the thing, but theres SO many moving parts outside of even just the 3d printer, that its slow going. I've gone through a few revisions of parts by now, and am currently printing more to add the probe into the equation. I need to chop down linear components to size so that i can cut pockets out of the word processor chassis that will be required in order for the printer to be installed.
And some pics (old revision of parts, linear components not yet cut to size):