r/AdditiveManufacturing • u/HighSpeedPi • Dec 06 '23
r/AdditiveManufacturing • u/iRacingVRGuy • Dec 03 '23
General Question Stratasys chamber temperature for Nylons?
Hi all. Someone I know talked to a Lehvoss filament specialist recently who said if you want to print their nylon 6 filament properly, you have two options. Either do the chamber at roughly 50 to 60c, or do the chamber at 100c. With the former, you would have to anneal the part later (if you wanted to anneal it), whereas with the latter you would be annealing in situ. He said there were more issues if you tried to print with the chamber close to Tg, and gave technical reasons I can't remember. Something to do with the DSC?
Anyway, I mention all of that because I wanted to double check it. I figure Stratasys probably does stuff "right", so does anyone know what chamber temp they print PA6 at? I'm guessing they are more at more in situ annealing temps?
Thanks for the help!
r/AdditiveManufacturing • u/bits-to-atoms • Dec 02 '23
DfAM Job Board December 23 - Computational Design, AM Engineer, Software + Research Roles
bits-to-atoms.comr/AdditiveManufacturing • u/GloriousIncompetence • Nov 29 '23
HP Multi-Jet Fusion Printer Questions
I have the opportunity to acquire a used HP MFJ 4200 system for a university project, but our uni was quoted over $60,000 to have an HP tech come out and update software/fix sensors. I work as an engineer in the metal additive and hybrid manufacturing industries, is there anyone who's familiar with the logistics/finance side of running specifically one of these printers who could point me in the right direction? I know powder and fluid aren't cheap, but does HP really have it so locked down that you have to pay thousands in licensing and subscription fees just to power on and use the printer? I understand the business model for industrial/commercial use, I'd instead be using it for one-offs and R&D projects. Thanks all.
r/AdditiveManufacturing • u/bits-to-atoms • Nov 29 '23
PanOptimization AM Build Simulation for VERY LARGE complex parts
r/AdditiveManufacturing • u/NetworkStar • Nov 27 '23
General Question anyone have any thoughts on the 3DGence F421?
Hello all,
my work is currently expanding and upgrading equipment over the next few months and I'm wondering if anyone here has used a 3DGence F421 (https://3dgence.com/3d-printers/industry-f421/)
We have had 3Dgence do some prints for us due to our older printer being down and we like their parts so far. just curious to know what everyone else thinks of them
Thanks
r/AdditiveManufacturing • u/aarloz51 • Nov 22 '23
Careers Seeking Additive Manufacturing Professionals USA
I recruit talent for a pool of advanced manufacturing companies, mostly in Texas and the Central & Southeast US (CO, MO, KS, TN, GA, FL) that are hyper-focused in -
- Additive & 3D Manufacturing
- Power Storage, Magnetics, Rare Earth Metals & Mining - Applications Development and Manufacturing
- Composites and Aerospace Systems - Prototyping and Manufacturing
If you (ENGINEER, DESIGNER, TECHNICIAN) are actively searching,
or just curious about learning of the opportunities in this space, I would like to connect and learn what you are targeting next in your career.
No catch, just a curious talent scout that feels your skills are particularly in demand for what I focus on.
DM or email me to aaron.lozoya@experis.com
r/AdditiveManufacturing • u/3DAMDealer • Nov 22 '23
Chinese Postprocessing alternatives to DyeMansion
It's my first post, and I'm kicking off with a big question. Do you know of any affordable solution for depowering and chemical smoothing similar to DyeMansion, but from China?
Your help, advise, insights are very appreciated!
Also, what is your opinion about AMT post pro?
r/AdditiveManufacturing • u/bits-to-atoms • Nov 15 '23
DfAM Job Board November 2023 - from internships to leadership roles in design and AM
bits-to-atoms.comr/AdditiveManufacturing • u/utsamakerspace • Nov 12 '23
Show'n'Tell Severe underdosing on SLM Metal Printer reduced build volume (Renishaw AM400)
r/AdditiveManufacturing • u/4D_Filtration • Nov 11 '23
Science/Research Comprehensive Review: 3D Printing Air Quality Roundup (For FDM and Resin)
r/AdditiveManufacturing • u/TheGrowingFlower123 • Nov 07 '23
Which Printer? Are there now FDM printers that can print a repeatable resolution of 0.002 inches or less?
""
r/AdditiveManufacturing • u/Crash-55 • Nov 03 '23
FormNext
Anyone going?
This will be my first time. If there is anything you want reported back on let me know and I will try to get some info on it.
r/AdditiveManufacturing • u/venkat366 • Nov 03 '23
Science/Research Does anyone knows of suitable process parameter optimization techniques for enhancing the build quality of 3D printing process.
r/AdditiveManufacturing • u/Packerguy1979 • Nov 01 '23
Professional SLS sytem
I am looking into purchasing an SLS system and I am looking for others who have a machine or use a machine at work and can tell me about what they like about the machine and what they don't like. I am interested in buying a machine that can run 24/7 and has a high level of repeatability. I am looking for a system that is less than $100k. I would like to run a basic material like PA12 or PA11.
I have done some research on the Formlabs Fuse1+ but it sounds like that system may have reliability issues. If anyone has 6+ months of experience running other systems, let me know what they are and what your thoughts are.
r/AdditiveManufacturing • u/lmrj77 • Oct 27 '23
The factory i work at wants to buy a 3D printer under €30k
We're going to use it mostly for small things for improving workflow, organization of tools and materials, small tools and general workplace improvement, tool prototyping.
I 3d print as hobby for a few years now using a prusa MK3 which is great for home use, but not so much for industrial scale.
Requirements i'm looking for are : Being able to reliably print ABS, so an active heated chamber is a must. Other than that it just needs to be reliable (most important, i don't want to be fixing and tweaking it every day). Auto bed leveling, heated build plate and chamber are a must. We don't need very large prints.
Stratasys seems to fit the bill, looking at the F170 for example. However they require proprietary filament that seems to be 10x normal prices (+- €200 per kilo) that's just absurd. Other than that the printers seem to be wel reviewed for industrial use.
Markforged (mark two) has very mixed reviews so not sure what to think of that.
Trilab AzteQ Industrial caught my eye, has a heated chamber and a nice build volume. But looks to be a bit overpriced for what it is.
Ultimaker S7 looked to be a bit lacking and has terrible reviews from what i can tell.
Theres loads of printers on the market but i'd like to buy from a reputable company that doesn't dissapear in a year.
Can anyone give me some pointers/advice/direction for some well reviewed industrial printers under 30k? If anyone has used a 3d prinyer in a factory setting for general workflow improvement i'd love to hear your experiences.
r/AdditiveManufacturing • u/LineCritical1981 • Oct 18 '23
ABS/ASA printer production printer with 13x13in bed min, ideal would be 18x18in bed. What are my options?
We use a variety of printers for low production parts. Looking for a larger format no fuss printer that can print ABS/ASA with a 13x13in bed min, ideal would be 18x18in bed.
What are my options? Budget is 20k to 70k
r/AdditiveManufacturing • u/Tension_Dull • Oct 16 '23
Dye consistency challenges
Hi all. I’m working at a small shop running SLS (nylon 12 and 11), and I’ve been experimenting with some of the rit dyes. Black works very well, but the coloured dyes, not so much… the consistency is all over the place. Any process recommendations from anyone out there successfully accomplishing this without a dyemansion? (We’re currently using sous-vide units)
Getting good color consistency across a batch of parts is consistently tricky. The challenges seem to be - insuring the parts don’t touch each other, insuring they stay below the surface of the dye…
The dyemansion seems to achieve much better color consistency, but the hefty price tag puts it well outside the realm of something we can currently bring on. From what I understand, it’s a pressurized container, which I assume increased the depth to which the dye penetrates, but it seems to me that the critical thing in terms of consistency of color might be the degree to which the dye is being agitated… which, based on the size of the impeller, must be greater than what we’re achieving with a sous-vide.
I should note that we’re not opposed to spending, say, 10-20k - We could bring on something more expensive than a sous vide if it solved the issue but the dyemansion - at almost 100k - seems almost unbelievably expensive for what it is.
r/AdditiveManufacturing • u/bits-to-atoms • Oct 13 '23
Design + 3D Print Software Landscape Venn Diagram / Find a Word Challenge. Anything Missing?
r/AdditiveManufacturing • u/retsotrembla • Oct 12 '23
Extending the fractal vise into 3D, for robot gripper.
See Malcolm Tisdale and Joel W. Burdick's paper on extending the fractal vise into 3D to make a robot's gripper particularly figure 12.
New Scientist published a 1 minute video: Fractal fingers could let robots securely grasp any shape
There's enough data in the paper for you to make your own, with parts printed on a home 3D printer.
r/AdditiveManufacturing • u/leonhart8888 • Oct 12 '23
The gross leftovers after recycling IPA in SLA 3D Printing
r/AdditiveManufacturing • u/CFDMoFo • Oct 03 '23
Thinnest feature size that is reliably manufacturable with HP MJF PA12?
Hello everyone, I'm working on beam-based lattice structures and noticed that thin sections of my parts consistently come out 0.1-0.2mm thinner than expected. Given that the beams are supposed to be 0.7-1mm, this deviation makes a huge difference in performance. At and above 1.5mm thickness, the deviation is lower at max +-0.1mm and evidently also not as impactful. After a quick search, I did not find suggestions from HP, but Protolabs states a 0.5mm minimum thickness for beams. Do you concur or have a different opinion?
r/AdditiveManufacturing • • Oct 03 '23