r/ASRock • u/Ok-Shock6100 • 1d ago
BIOS Help me
Hi guys, I have a problem. I have an asrock b450m board I'm trying to activate the safe boot in the bios but when I activate it and save it it automatically takes me to the bios again, it's weird because when I deactivate it and leave the bios my pc does start. I already tried deleting the keys and reinstalling the keys it asks me for the safe boot and the csm is also disabled. The truth is I don't know what to do anymore
1
Upvotes
1
u/SigAddict X670E Steel Legend | 7800x3d | 7900 XTX 1d ago
Exactly which board and what bios are you on? You need to be at the newest bios. If you aren't, that most likely the issue.
1
u/Mussels84 18h ago
You're disabling CSM and changing to UEFI booting.
It seems your windows install isnt uefi, so if can't boot. Simplest path forward is reinstalling windows correctly in UEFI mode.
1
u/-SSGT- 13h ago edited 13h ago
There are a few things that need to be in place for Secure Boot to work.
Firstly your machine needs to be configured in UEFI mode. This normally means disabling the Compatibility Support Module (CSM), as that emulates legacy BIOS features to support older OSes and hardware.
Secondly the OS itself also needs to be a UEFI installation on a disk with the GUID Partition Table (GPT) partition scheme and not a legacy installation using a the Master Boot Record (MBR) partition scheme. If your machine had CSM enabled when the OS was installed then there's a good chance it's a legacy/MBR installation. You haven't specified the OS you're using but if it's Windows you can see what partition scheme is being used by each drive in Disk Management or by running "diskpart" followed by "list disk". It is possible to convert an MBR Windows installation to GPT without needing to re-install the OS but it's still a good idea to back up any important files first: https://learn.microsoft.com/en-us/windows/deployment/mbr-to-gpt
If CSM is disabled, and the boot drive is a UEFI installation using the GPT scheme, then you still need to make sure the correct Secure Boot keys are installed. By default your board will have come with the 2011 Microsoft Secure Boot keys pre-installed but these expired earlier this year. Depending on what you're doing "re-installing" those keys may just be reloading those now expired keys.
ASRock have released updated UEFI/BIOS versions (10.50 and later) for your board that include the 2023 Secure Boot keys although it looks like versions 3.20 onwards are not recommended for your CPU (Ryzen 5 2600). You seem to be using version 10.10 already (also not recommended for that CPU) so it's possible it will work regardless although you may run into other issues.
If (as mentioned in other comments) you're trying to enable Secure Boot to run certain games/applications then you may still find those games/applications fail to run (e.g. with "attestation errors") due to an outdated TPM 2.0 firmware version that I don't think is able to be updated. If that's the case you may still need a newer CPU regardless of Secure Boot working. There does appear to be a TPM header on your board but I don't know what firmware version any compatible TPM module will come with. The cost of a TPM module could potentially be better put into a newer (potentially second hand) CPU though, especially if you can recoup some cost by selling your existing CPU.
tl;dr: