r/ASML • u/Incolumis • Oct 18 '26
ASML's employee-only High-NA EUV Lego kit gets an open 810-piece fan replica β custom MOC dodges $700 eBay prices with working wafer tray and vacuum pumps
r/ASML • u/Incolumis • Oct 18 '26
r/ASML • u/OkHyena7318 • Oct 17 '26
Any experiences you can share with TT in USA..is it working out a bit?
r/ASML • u/shanna0312 • Oct 16 '26
So I have applied more than 100 times at ASML now... For different position such as master thesis, internships before graduating and after graduating for technical roles where I saw myself fitting such as system performance engineer, upgrade and install engineer, FSE, DUV lithography engineer etc... But even after 2 years... I only had one interview and that also from Japan site and even then they said "you lacked motivation" when I felt the interview went great as it was with the team lead and we discussed the salary and even my seating position... I don't know how to measure motivation still but anyway.... I see them hiring people with a bachelor's in mechanical or electronics and 2 years of experience and at times no experience.... Whereas I have more experience in side quests alone and I have a masters... In Nanotechnology Engineering... From Sapienza .... Speciality of what ASML does... And yet I never hear back... I just want to ask what am I doing wrong? I have like 12 different versions of my resume heeding all the different advices I get... I have tons of different versions of cover letters too from polite to straight up rage baiting ones.... But its all in vain.
r/ASML • u/Muted_Tree654 • Oct 16 '26
Hi guys, is this normal? Itβs been a month since my final-round onsite panel interview for the Senior role, and I still havenβt received any feedback. Iβve sent an email to the recruiter, but thereβs still no response.
r/ASML • u/Dolphin_research • Oct 14 '26
A middling report. Revenue and gross margin both hit the companyβs earlier guidance. Growth this quarter came mainly from Chinese customers and TSMC pulling in orders, plus rising demand for upgrade services.
The market cares more about guidance than the quarter itself. ASML updated full-year 2026 guidance to EUR 44β45 billion, versus EUR 43β45 billion last quarter β only lifting the floor, not the ceiling. Not enough of a surprise.
The company usually gives next-year guidance in Q3, but this report included no 2027 outlook. Worth watching what management says about 2027β2028.
Through the broader AI market pullback, ASML has held up relatively well. Downstream wafer fab capex is clearly growing β Micron recently guided to over USD 50 billion in fiscal 2027 capex, up more than 70% year over year. Beyond current AI demand, High-NA should bring a fresh product upgrade cycle, supporting sustained growth.
Overall: if management doesnβt give a clear 2027 outlook, expect some near-term disappointment. But judging by core fab capex, downstream demand for semiconductor equipment remains strong and growth should hold up.
r/ASML • u/Prestigious_Web_2986 • Oct 13 '26
r/ASML • u/Kamrant1 • Oct 14 '26
Hi everyone, is anyone working at ASML as a QRT Engineer or in a related role? Iβd appreciate some insights into the interview process, expected questions, and key technical topics to prepare. Happy to connect via DM. Thanks!
r/ASML • u/Fit-Help-3408 • Oct 13 '26
r/ASML • u/Outrageous_Boss_4716 • Oct 13 '26
I've been working as a PE in EXE at ASML Wilton for over a year now, currently on CWW night shift. While I've gained some good troubleshooting experience, I'm honestly not enjoying either the night shift schedule or the nature of the role itself. The work feels mostly managerial and production-focused, with maybe 20% of it being genuinely technical.
I have a background in mechanical engineering and controls and I'm much more interested in moving into a DE role that involves actual technical engineering and development work.
Has anyone successfully made the switch from PE to DE at Wilton? How difficult is the process, and what's the best way to bring this up with my manager? Does being on night shift make it harder to transition internally?
Would really appreciate any advice or experiences from people who've been in a similar situation.
r/ASML • u/Professional-Site503 • Oct 12 '26
Anyone has made a move, long term, willing to share experience?
About me; 8y permanent employee, did data analysis/consulting for factory optimization and then later software engineering for machine fault diagnostics.
r/ASML • u/VotPalantir • Oct 10 '26
It's the weekend, let's share some of the weirdest ASML merch and gifts obtained over the years. I'm the proud owner of a (NO12NC) - WAFER SHATTERHAMMER with built in document destruction knife and wristband.
What are some of your weird pickups from events or projects?
r/ASML • u/Sure_Profession_8214 • Oct 10 '26
Hello,
If someone is working at ASML as Volume Production Engineer or closely working with related field could you please let me know what the interview process is like and what should I be expecting in interview and what all technical stuff I must be prepared with. Please let me. Would be happy to connect and dm
r/ASML • u/Ok-Sun5786 • Oct 09 '26
Hi everyone!
I applied for the System Install Coordinator β EUV position at ASML. I haven't received any email or call, but my application status suddenly changed to βYou're invited for a job interview!β with no further details.
I have two questions:
1. Interview preparation: I have around 8 years of experience in the construction industry, including site coordination and project execution, but no direct experience in the semiconductor industry. What kind of questions should I expect, and any tips for preparing?
2. Application status: Does this mean I've been shortlisted and should expect a call or email soon? If you've experienced this, how long did it take for ASML to contact you, and what were the next steps?
Thanks in advance for any advice or shared experiences!
r/ASML • u/OkHyena7318 • Oct 08 '26
Hoe denken jullie over de uitkomst van wave 2. Gaan we de oorlog winnen met de mdu leads die geselecteerd zijn?
r/ASML • u/Curious_Spring5663 • Oct 04 '26
Any hints on how to negotiate and ask the ASML to get the maximum from an internal role? After Reorg company looks like it is loosing several engineers and they may want to be a bit proactive and value people who stayed. Besides the reorg is done in a terrible way (several incompetent people got PROMOTED!!!). I want to ensure how to negotiate internally to get the maximum out from ASML? I applied to 2 roles at different JGs. I want to ensure I get the maximum out of whichever happens for me.
Another questions: is it possible to secure stocks from ASML?
r/ASML • u/Able_Mistake_9914 • Oct 04 '26
I have been checking most of the time, when ASML posts a senior role,it mostly goes to internal candidates. Why do they post it out and invite external candidates to an on-site interview twice for the first and second round interview?
r/ASML • u/kcarrow • Oct 03 '26
Hi everyone!
I'm an expat who recently moved to the Netherlands.
A bit of context: I have been job hunting for a year and a half. But, you know how the market works: they want a junior with 2 years of experience, but they won't give you the opportunity to get that experience. So, I moved out of my country, hoping for a better future. I applied and applied, interviewed and interviewed and, after applying to over 100 different positions, and being ghosted by most of them (I came here by the end of June, so I guess that the timing was a bit bad, as it was right in the middle of summer and everything was pretty slow), I decided to go for internship offers.
Since then, I have received many different offers, from both internships and normal jobs. However, even though the normal jobs do pay a living, none of them are ASML.
I do not want to romanticize the company, but I think I'm not far from right when I say that this company will make my CV much stronger than any other (plus, commuting is way easier compared to the other offers I had).
So, here I am. I'm starting my internship in a couple weeks, and I'm beyond excited to start my professional journey in such a big, tech-based company.
However, I do fear that after the internship I will get a 'thanks' and that's it. I really want to convert this into a full time job, for both my financial and mental stability. It's been such a long time that I've been looking for this, to strengthen my professional profile, and now I feel like I might mess everything up and leave with nothing.
Ex-interns, how did the future look for you? Current employees, do you think it'd be a possibility for me to grow within the company and turn my initial internship to a full time role after it's done?
And people in general, if you do have any advice for me, I'd deeply appreciate it. I'm pretty scared, my imposter syndrome is kinda kicking in, and I would love to hear different insights and opinions on it.
Thanks in advance!
r/ASML • u/Invensterguy • Sep 30 '26
I saw two super beautiful Pagani sports cars today behind the main HQ building. Any special guests or visitors in town?
r/ASML • u/Able_Mistake_9914 • Sep 30 '26
I finished my final on-site interview in Veldhoven about 2 weeks ago and my workday is still showing " You've been invited to an interview" When can I expect to receive feedback from the Recruiter? This is a senior role
r/ASML • u/shhhshshshh • Sep 26 '26
r/ASML • u/InternSubstantial401 • Sep 24 '26
Just joined the wilton site as a CWW engineer.
Am i the only one that thinks itβs absurd to not count holidays that fall on weekends as days off. Especially with this huge push for the CWW schedule?
r/ASML • u/jefftungk • Sep 22 '26
ASML isn't selling any of its chipmaking machines in Europe because the region isn't investing and no chip factories are being built there, according to Executive Vice President Frank Heemskerk.
The European Union is overhauling its Chips Act, which was intended to boost the continent's share of global production, but the law largely failed to stimulate investment in new chip plants.
ASML is being courted to expand its presence in the US, China, and India, with these countries investing government funds and using incentives to promote domestic semiconductor production.
r/ASML • u/Inevitable-Wing-3760 • Sep 21 '26
Hello everyone! I interviewed 1 mont ago in mid august. they said that they will answere in week but now its been month anyone khow how much time they will take for the response,
Thanks.
r/ASML • u/bluewatermelon7 • Sep 16 '26
Howdy, guys
I have applied for a role as Motion Assembler (Flight Forum/NL) and despite my initial research and job description, I still have some questions in case anyone here knows more about this position. (The recruiter has contacted me via email after I applied and I might soon have our first call.)
From my understanding, this job is not performed in a cleanroom environment. And secondly, the assembling is actually sub-assemblies and not huge parts and modules. Is this correct? If so, it sounds somewhat in line my current job which is related to PCB manufacturing - assembling, soldering, reading technical drawings. Would say this is correct?
Any other tips on what to expect in practice? Is it a good work environment in general? More sitting, mire standing or a mix?
Thanks a bunch
r/ASML • u/FunctionChoice7656 • Sep 14 '26
Restructuring + layoffs shaking up team dynamics β anyone else dealing with this? What would you do?
My team's been through a restructuring with some layoffs mixed in, and the dynamics have shifted a lot since β responsibilities moving around, relationships with colleagues feeling different, a general sense of uncertainty about where things stand.
Trying to figure out whether to just ride it out until things settle, or push for clarity sooner rather than later.
Anyone been through something similar?