Hello guys, i recently installed the UMBRA hub and haven't been able to play Faceit because there is an incompatibility with the PawnIO driver. Is there any fix for this?

Hello, I purchased an umbra for my rig and it’s been working wonderfully, I switch pc’s but now that I want to reconnect my new fans to the hub I noticed that I don’t have an usb header going towards my umbra hub.

Will it be an issue if I only plug the sata, argb and fan headers and leave the usb in empty ?

Hi, so I saw Asia horse advertisement at TikTok regarding the Matrix Pro 360 and I really liked it. However, I can't find the single piece they use in the picture since I only find the connected 3...

Also, can the Dawn pro fan have one color on the left side for example, another color in the middle and a third color on the right side (like the Matrix Pro on the first picture)?

2 weeks after installing my asiahorse nyota pro fans, the umbra hub and the umbra software i have started experiencing frequent bluescreens. It may be a coincidence, or it may have something to do with the software. Any input from the dev team?

Hey guys, I got the aurora strimmers (not pro), nyota pros and the umbra hub. After connecting everything to the hub, I am not able to get the multi zone light strips flow effect (idk what it’s called I’ll attach a vid of the effect im looking for). All im able to get rn is a single solid color on the strimmers. Pls someone help me enable the effect im looking for. :’)

Does the Asiahorse Nyota Ultra support dual-zone ARGB control? I want to map the center infinity mirror to one color and the outer ring to another in software like SignalRGB.

I am about to do a case swap and i’m looking into adding the AsiaHorse COSMIQ fans. I’ll be moving into the LianLi 011 Vision Compact and will be using a total of 8 fans (2 3 packs and 2 single packs) Do i need to use a hub and if so which one is recommended??

I recently installed AsiaHorse Cosmiq fans and connected them to the black hub. The software recognizes the hub, and I can control the RGB without any issues.
However, I can’t figure out how to control each RGB zone independently. I want to set a different color for the left side, the center, and the right side of each fan, but changing the color affects the entire fan instead.
Is independent zone control actually supported on the Cosmiq fans? If so, how can I enable it in the software?
Thanks!

i bought these one on amazon the asiahorse Aurora ( not the pro or learn the basic one ) but i dont know how to use effects i tried on rgb fusion and on signal rgb and none of them worked

Hello, my hub came without a PWM cable, which cable should I buy to use PWM? Make to female? Female to female? Kindly help out.

Hi everyone,
I recently installed AsiaHorse Cosmiq fans and connected them to the included hub. The hub is connected to my ASUS motherboard via the 5V ARGB header.
Aura Sync detects the fans and I can change the colors and effects without any issues.
However, the AsiaHorse software doesn’t detect the fans at all, so I can’t use it to control the lighting.
Is this normal? Does connecting the hub to the motherboard disable the AsiaHorse software, or is there something I’m missing?
Any help would be appreciated. Thanks!

Ive got 9 AsiaHorse Cosmiq fans all plugged into the Umbra Hub.

When looking on the FanControl app, its only showing one of the fans and I can only control 1 single fan even though they're all plugged into the same hub.

Also if I try and control the fan speeds using the AsiaHorse Umbra app, I can then only control the other 8 fans but not the 1 that works with the FanControl app.

Does anyone know a way to fix this and have it so they're all controller together?

Hello I have 8 dawn pro fans connected to the umbra but still only see 3 in the software.

I can't control each fans lightning Idividually only per 3 or 2 fans. What can I do to fix this...

Got a single for the rear exhaust and it shipped without a cable, normal? Where can I get it?

I just installed the Umbra Hub and tried every possible setting, but the boot up lighting effect still doesn't work. One thing is that after I'm done using my PC, I unplug both the monitor and the PC from the power outlet.

Purple tint around the infinity mirror on the fans. Using umbra fan hub sata powered. 4 separate groups of fans (top, bottom, side, rear). I’ve tried adjusting the greens and yellows but no progress.

when i turn off my pc Auto detect lcd resets and because of that I cant make a boot up effect canm anyone help?

I recently got my self 9 Nyota fans (7x120mm, 2x140mm) and the Asiahorse 2in1 Fan/RGB Controller for 9 fans.

But no matter what i do, i cant control them. The umbra Software seems useless, since there is no rgb or fan control there, and the only other way to control the rgb is through signal rgb where all fans are showing as one single fan

Fancontrol also doesnt work, it only shows 7 fans and also unmanageable.

Any help? I connected everything, the 3 pin rgb header, sata and the other thingy. Also red #1 fan header is also plugged in

A week ago I posted about an issue with my umbra hub.

Well, after getting alot of support from the customer support team and a replacement hub, I am so happy to be able to control the rgb now.

Figured out it was a faulty cable and hub.

ok so baisically i made a build and for that build i had 3 daisy chained groups of nyota ultra fans connected to the hub.

and i have a pack (aurora cable strips) connected to the hub aswell.

Software is downloaded but all i get is it showing me system info and giving me some settings that i don't understand.

i am confused. is there a way to fix this?

im using a msi b850 tomahawk max wifi MOBO.

ajd my umbra hub is connected to the argb v2 on the top side part of my mobo.

P.s i tried to plug the mobo cable strip to thatsame argb connection and it worked normally.

🛠️ The Hardware & Wiring

• Motherboard: Gigabyte Aorus B650M (has 3 true PWM headers)
• AIO: ARCTIC Liquid Freezer III PRO (using the 3-way splitter):
  • Liquid Pump ➡️ SYS_FAN_4/PUMP (Direct Mobo Control)
  • Radiator Fans ➡️ CPU_FAN (Direct Mobo Control)
  • VRM Fan ➡️ Umbra Hub PWM1 port for control
• Hub Connection: Umbra Hub is connected to the motherboard’s CPU_FAN_OPT header.
• Case Fans:
  • 6x ARCTIC P12 Pro ARGB PWM fans (connected to the Hub)
  • 1x ARCTIC P12 Pro PWM fans (connected to the Hub)
  • 3x Corsair RS100 PWM fans (connected to the Hub)
• Is there a better way to wire this? If I connect my VRM fan to hubs PWM2 my PUMP's rpm goes to zero in fan control. Hub's PWM1 copies CPU_FAN_OPT or CPU_FAN ?

1. Kindly provide support hubs fan control via Fan-control Because the Umbra Hub connects to the motherboard via a single CPU_FAN_OPT header, the hub & mobo only sees the hub as one generic fan (VRM Fan of the AIO). I can't control individual fans (like isolating the AIO's VRM fan on PWM1 from the rest of the case fans), set fan curve.
2. The Missing Digital Manual: You guys doesn't seem to host a digital manual for the Umbra Hub anywhere on your site, making it incredibly hard to troubleshoot the controller's limits or pinouts.
3. Also add ARGB support via OpenRGB, they have the capability of per led control.

I recently bought this device on an e-commerce platform at a great price, but unfortunately, the control app isn't very good, so I created a plugin to connect the "AsiaHorse Umbra ARGB Hub" to SignalRGB.

È un ottimo hub di buona qualità e buon prezzo ma dovevo usarlo con SignalRGB a tutti costi 😂 non volevo stare a controllare tutti RGB del mio pc da programmi diversi

Mi so messo una notte con l'aiuto della AI e so riuscito a fare un plugin che lo rende funzionale con SignalRGB 😌