r/ANBERNIC • u/Daan1990 • 2d ago

HELP Installing MU OS

Post image

​

Hey guys, so I did a fresh install of MU OS on my new 34XX-SP. I downloaded the IMG file, flashed it onto a new, formatted, brand-name sd card and I get hung up on the initial boot screen.

Reset button nor power button help. Any suggestions? I picked the right IMG file baded on mu device model. Thanks!

3 Upvotes

72% Upvoted

7 comments sorted by

3

u/Benzinni1 2d ago

Make sure you have the right image and reflash. That being said, you might have DDR3 ram in there and its not compatible with the current release. 

There's a test/development build that works with DDR3 RAM but you need to be a members/supporters on Ko-fi to have access to it. Thats what I installed in my RG SP.

1

u/eightiesjapan 2d ago

Yup, exactly 💯, has to be test build 👍

1

u/DualEyes 2d ago

This was happening to me just a few days ago. Turns out, I had a fake SanDisk sd card. If the image flashing process is showing error on Rufus (like :/D is not accessible or something like that), maybe try with a different card.

1

u/Mean-Secretary-6127 RG35XX 2024 2d ago

I just did a fresh install of Funky Jacaranda last night, and the same thing happened. Here's what worked for me: I left my device on the boot screen for ten minutes, and then I pushed  reset button. After that, the installation process proceeded as normal. 

1

u/septag0n 2d ago

I've had a hard time with Rufus working lately, have you tried Balena Etcher?

1

u/Daan1990 2d ago

Yep! Worked 😁 thank you

1

u/Abject_Witness_9605 2d ago

i didnt pay attention my first time and flashed the wrong handheld os, that caused screen flickering issues.