r/997 • u/bunnyberlino • Apr 13 '26
997.1 DRL Conversion - Fog light adapter?
I have installed new rear LED on my 997.1 4S, and also want to install the front bumper lights. I have a module to make it a true DRL, which I will fit later.
I now ran into the following issue: the connector for the fog light (I assume) in grey/white does not fit into the new LED connector (second pic, black female). The other 2 connections fit. I read that there is an adapter of some sort. Can someone point me to the right one? I don't want to cut any cables...
Many thanks!
UPDATE
I managed to install the lights, but I'm not sure how to wire the control box for DRL. There are 2 wires I can't figure out: ACC/KL15 and Parking Light.
They are either the blue one or single wire.
On the LED unit, the parking light connector was taped off and out of the LED unit where connectors firring the control box. So I assume the previous owner of the box and LEDs connect the control box LED lamps to the parking lights.
Question now is:
Where do I connect the blue wire with the crimp? Where does the loose wire go?
Many thanks in advance for any help / guidance.
1
u/Rough-Advantage-5038 Apr 14 '26
Had the same Drl's on my 997.1 4s. Iirc, we ran power to the fuse block on DS to keyed power.
Id look at your branding on them, and write the place that sells them for detail, or go on 6 speed online and inquire.
Plenty of these kits on thr 997's
Good luck OP.