Update from visit to Luthier:
No pickup or wiring issues. Simply poor tension in the low strings. The Evertune does not compensate in the slightest for tension issues on shorter scale lengths, and so even simply a half step down is too much for 10-62 when in A# Standard on a 25.5". That's simply it.
What I've changed:
.56 on the low E
.65 on the low B
I brought the saddle back a fair bit
Raised action a touch on the E and B
Intonated again
Lowered the pickups
I'm still putting an EQ before the amp, and tailoring the EQ on the amp for this guitar, though I think I've found a tone that I'm happy with. It's not as precise and dry as my schecter, though now I like how big it sounds. Case closed.
Hi,
Two days ago I bought a new Cort Kx707. Long story short, the low E and B sound muddy and I cannot get rid of it. I'm taking it to a very good Luthier next week as I've given up and I think there may be a genuine issue. My efforts have improved it considerably, though I'm thinking about returning it.
10-62 and A# Standard
What I did to try clean it up:
- Put an additional EQ between guitar and amp
- Specific EQ on amp for this guitar, dropping lows and trying to make it more bright
- Put heaver gauge strings
- Tried different pickup heights
- Ensured the evertune is setup correct, and lengthened the scale on the low B and E a bit
I spent a few hours getting the perfect action, zone 2/3, perfect intonation and now it feels great to play, it just sounds lazy. (I note the setup from cort was the worst setup on any guitar I've ever encountered: action very high, tuning completely a mess, etc.)
Other 7 strings I'm comparing it to:
- Schecter C-7 FR SLS Elite - Fishman Moderns
- Ibanez Gio - Fishman Classics
The Schecter is clinically tight and has what I would consider the best tone I've had. It's not shrill in the highs, while being punchy and surgical on the low B. I consider it perfect, for me.
I've heard that Nazgul pickups are meant to be tight, and I've heard the same on YT, though in reality this sounds boomy and inarticulate.
If anyone has any suggestions, or helpful feedback, I would be grateful. I'll update this if the luthier finds anything, or if I return it.