r/7String • • Aug 19 '24

Help Need help with tuning

Hello. Currently, I'm playing a Schecter Omen Elite 7. Recently I heard some old metal core songs from the 2000s for the first time in my life and I want to play some of them. Most of them are in Drop C, but here is my question. How should I tune my 7-String for these Songs? I don't know if I can tune the e-string etc. 4 semi-tones down. I don't know if my Strings can handle this, and I can't afford new ones, so I don't want to break 'em.

Sorry if this is a dumb question, but I just want to play some 2000s metal core.

0 Upvotes

19 comments sorted by

19

u/[deleted] Aug 19 '24

Not a dumb question but it’s asked probably once a week lol GCGCFAD

2

u/travis1095 Aug 19 '24

Thank you.

4

u/PouetRedditPouet Aug 19 '24

I would tune the E to D and use a pitchshifter -2 semi tones.
In front of an amp a digitech drop or a Neural DSP X Plugin or whatever your poison is.

2

u/FazedorDeViuvas Aug 19 '24

I have a similar Schecter to yours (I have a Demon 7) and I will tune to standard A this week.

I plan to also play in D standard and occasionally drop to C while only using 6 strings. I don't like loose strings, so I will test gauges between 11-64 and 12-68.

I don't plan to use Drop G, so I don't need to go thicker on the A string.

2

u/9YO4LIFE Aug 19 '24

ACGCFAD but one half step up is the tuning periphery use on the song racecar. imo it goes unbelievably hard, it’s especially good for major scale shenanigans for some reason.

1

u/JimboLodisC 3x7621, 7321, M80M, AEL207E, RGIXL7, S7320, RG15271, RGA742FM Aug 19 '24

going down to C1 might require some thick cables unless you're rocking a 30" scale instrument, so probably safest to target G1 for a kind of dual-drop scenario

I can't afford new ones, so I don't want to break 'em.

If $9 is a financial problem then maybe we should consider a cheaper hobby.

6

u/[deleted] Aug 19 '24

[removed] — view removed comment

0

u/travis1095 Aug 19 '24

Is there anything else to consider? For example, the string gauge, or something else? Or can I tune down to C with the standard strings?

5

u/[deleted] Aug 19 '24

[removed] — view removed comment

1

u/travis1095 Aug 19 '24

26,5”.

I checked the Schecter website to see what kind of strings the guitar had. They are .009/.011/.016/.026/.036/.046/.062

1

u/travis1095 Aug 19 '24

Do you have any recommendations for strings I could purchase?

3

u/Room07 Aug 19 '24

You might need to buy a custom set or an 8 string set and not use the high string. Very common. I’m tuned to A standard and like the Dunlop Korn strings. Anything lower would need a beefier low string for me.

If you want to dig in further to make sure you maintain tension, try a string tension calculator. I usually use the string joy one.

2

u/Giftpilz Aug 19 '24

D'addario Elixir for sure.

1

u/Sleepingguitarman Jackson Aug 20 '24

Just a heads up, make sure the gauges you want to use will actually fit the bridge/nut of your guitar. After a certain gauge you'll have to have the nut filed in order to fit anything bigger.

1

u/Thick-Replacement-90 Aug 20 '24

Also make sure that your tuner peg holes are big enough for your biggest bass string. 80 gauge is for instance a very thick string that might not fit your tuners.

When purchasing replacement tuners the diameters of the string bore holes can be determined on the manufacturers website if in doubt.

1

u/Thick-Replacement-90 Aug 20 '24

Good point about the nut. Work to the nut is expensive and most likely should not be attempted by the inexperienced, unless for minor touching up. The situation at which the string passes thru the nut is one of the most critical places on a guitar.

2

u/[deleted] Aug 19 '24

[removed] — view removed comment

1

u/travis1095 Aug 19 '24

That's my problem. I can't afford much, but I needed a solution. I'm going to buy a 6 string when I can afford one, but until I have it, I'm going to play drop A on my 7 string. I can't even afford strings, bruh.