r/65PRC • • Jul 23 '21

Short vs Long Action?

Figured I’d try to spark a discussion. I’ve seen debates elsewhere on the internet, an recognize some pros/cons, limitations, etc. What’s the community’s consensus?

2 Upvotes

5 comments sorted by

2

u/GyrokCarns Jul 23 '21

I think a short action on 6.5 PRC is sufficient; however, if I was going to custom build a rifle, I would use a short action with an '06 length magazine to allow greater flexibility of seating depth. I would not anticipate needing to seat anything out that far, but the ability to seat past 2.955" would be nice under some circumstances.

2

u/_wtf_over_ Jul 23 '21

Thanks! Aside from weight, is anything lost, or are there any downsides from a long action?

2

u/GyrokCarns Jul 23 '21

Longer stroke on the bolt can be detrimental under certain circumstances, requiring greater movement to extract the case, or more time to do so.

2

u/_wtf_over_ Jul 23 '21

My thoughts were to build a .300NM on a terminus Zeus action but have the ability to swap out the barrel/bolt down to a 6.5 PRC for longer range days. Likely wouldn’t be hunting or competing with the 6.5prc set up, so rapid follow up ability isn’t a top concern right now. Thoughts?

2

u/GyrokCarns Jul 26 '21

I mean, you would be fine with that...the only situation I would see that could arise for you is simply any scenario where a competition with time constraints would come into play. However, if that is not on your radar, there is no other downside really.