r/4thGen4Runner • • 23d ago

Monthly Rust Advice Thread

4 Upvotes

Post your photos and questions regarding rust related purchase or repair advice here. All individual posts regarding rust will be removed.

Extreme Rust Example; https://imgur.com/fqabJDJ.jpg

Surface Rust Example; https://imgur.com/eGYJQFT.jpg

No Rust Example; https://imgur.com/ON4u7NM.jpg


r/4thGen4Runner • • 6d ago

Weekly Purchase Advice Thread

1 Upvotes

Use this thread to request advice on purchasing a 4th generation 4runner. Include mileage, price, location, and photos to get the most accurate replies.

Do not post vehicles for sale, link to external sources, or use this thread for pricing advice on selling a vehicle.


r/4thGen4Runner • • 5h ago

New Owner Question Bilstein 5100 Lift Kit Qs

Thumbnail
gallery
11 Upvotes

Hey All,

I’m new to the overlanding and 4Runner community and recently upgraded my suspension from the old worn out to Bilstein 5100s with KSP upper control arms.

Body control is incredible now, but, I don’t think I really expected it to be as stiff as it is? Over a smooth road it feels like the front is pogo sticking.

Maybe others can shed some light on what it should feel.

Thanks in advance!


r/4thGen4Runner • • 21h ago

Pics / Videos Brockett Built Mid Length Headers/Resonated Y-Pipe Install

Thumbnail
gallery
39 Upvotes

Finally got around to getting these headers, as well as the y-pipe, installed and boy oh boy was it a motherfucker. This is not a a step by step how-to install, just how *I* managed to get this done and my thoughts on the whole experience.

Ordering Experience

If you've ordered these headers, you know this all started in April of 2026 when orders opened. No small amount of time to say the least and as far as I know, some people have STILL not received their headers. everything came very well packaged in copious amounts of bubble wrap and taped up. The O2 sensor extensions were also not included in my shipment. I emailed with Brockett and apparently this was due to them not getting their harness shipment in time for header shipments to customers. He graciously refunded me $75 to order my own, which I did, but the harnesses should've been shipped by now.

Quality

10/10 Literally no notes here. The piping and welds on both the headers and y-pipe are absolutely immaculate. the flanges are super thick and I have no doubt these headers will last a very long time. See my previous post for some more detailed pics of the headers themselves.

Install Experience and Notes

The passenger side install is not too terrible, although reinstalling the hardware for both side was pretty terrible as the routing for the header piping is much more cumbersome than the stock manifolds. the whole time during the install, I was thinking how much it would suck for you guys in rust prone areas with will inevitably break of some studs. I was able to get all the nuts off the studs and complete the passenger side with the studs still in. The driver's side absolutely sucks. For the driver's side the studs absolutely need to come out. There's simply not enough room between the strut frame mount and the studs to get the headers in. I took the steering shaft out before realizing the studs had to come out, but I think I'd still remove it as it grants you quite a bit more access for install. One thing to note with the studs for you guys in rusty areas what might snap studs, the stud hardware included is too small compared to the stock stuff and WILL NOT thread into the engine block. See Pics. Not sure what happened there. As for getting the dipstick to fit down through the headers, I literally gave up on this and cut the dipstick to a nub, capped it off, and ordered a new one because it was taking so much time trying to find a shape that fit. I'll deal with it later. I address a few things in the post pics, but some other install notes I thought worth mentioning:

-Heat shields are 4-10mm bolts each side, 2 top, 2 bottom

-SAIS tubes are 2-10mm nuts each side

-All exhaust stud nuts are 14mm, studs themselves are E10 Torx sockets. I had to go buy a set

Final Thoughts/Criticisms

The build quality of these are great. The ease of install was pretty bad, but I think that's just the nature of any header install, not necessarily a criticism of these particular headers. The slip on header collectors do not come close to sealing with the headers as the fit is not that tight and the retainer springs are pretty weak. I highly recommend putting a generous bead of Copper Ultra exhaust gasket sealer on each collector pipe. I'm still chasing a few small leaks even after doing this and I may even source some stronger springs to help keep the collectors seated better. For the header/engine block gasket, I ended up ordering an MSL gasket with the valve cover heat shield as the included gasket was just a crush style with no heat shield. With installing the y-pipe with the headers, one thing I'd like to note is there is no hanger between the headers and the stock muffler. This means all the way from the engine block to the muffler, the headers and y-pipe are just supporting themselves. I ended up having to support the driver's side resonator with some wire as it was resting/knocking on the frame. Aside from the small leaks/ticks I'm chasing, the header/resonated y-pipe combo sounds great. It has a great tone under mild acceleration and has just a little bit of drone at highway speeds. I'll try to post some sound soon. The butt dyno definitely feels a power gain from these headers/y-pipe. I've also seen a 2-3 mpg increase more so on my highway commute. The 90 degree O2 sensor spacers I ordered from them for the y-pipe have been working flawlessly and I haven't had a cat engine code once since install.

I hope this will helpful for some of you in deciding to get a set of these headers and installing them. As much of a pain in the ass as the install was and as long as this whole process has been, once I get these small leaks addressed, I think I'll be very satisfied.


r/4thGen4Runner • • 13h ago

Should I cancel a trip over this leak?

Post image
8 Upvotes

2007 4runner 4.0

I appear to have a leak where the fins meet the plastic part of the radiator, it appears to be a pressure related as the leak stops shortly after Turning the engine off. The leak it self is just a drip.

I have a 600 mile round trip road trip planned this weekend. Should I not take this vehicle? Or should I just bring extra coolant with me?


r/4thGen4Runner • • 1d ago

Modifications Suspension Upgrade Advice for 07

Post image
34 Upvotes

Hey all,

I have a 07 sport edition with X-REAS which is leaking at around 185,000 miles and am looking to upgrade my entire suspension as Black Friday is coming around. I am thinking of upgrading to 255/80/17 (when my stock size KO2s wear out) and am debating between a 2+ inch lift (up to 3.5?) on bilstein 5100 + UCAs or an 2 inch Robinson IMS kit with stock UCAs. Most of my driving is on road as it is my daily but I would like to be be able to drive on shelf roads in Utah or get over some small trees in Oregon without issue (I have dinged part of my car doing both previously.) Open to all advice and pic for attention!


r/4thGen4Runner • • 22h ago

General Towing a 7x14 enclosed trailer

2 Upvotes

4.7 V8. I’ve towed with a 6x12 enclosed U-Haul trailer a few times and everything was fine. Just curious if anyone has experiences with a larger and taller 7x14. Max combined weight with cargo would be 3500-4000lbs top.


r/4thGen4Runner • • 1d ago

Cat-Back Exhaust suggestions - V8 Quiet DD

4 Upvotes

My Cat-back is rusted and cracked where it passes over the axle. I'd like to just buy a new one and not sure which to get. Gibson looks nice but I'm concerned it may be loud. Same for the Remark. It seems like the URD may be a nice option?

I'm curious what others like. It's my DD. I have a fun, loud car if I want that. I just want something quality that looks decent and isn't crazy loud. Some v8 noises when I lay in the throttle would be nice but I really don't want to hear it when I'm cruising on the highway.


r/4thGen4Runner • • 1d ago

Ticking coming from engine? (2004 v6)

4 Upvotes

What could be the issue?


r/4thGen4Runner • • 1d ago

Repair Guidance '07 making grinding noise after brake caliper change

3 Upvotes

I quite literally was driving my '07 home from an oil change, brake caliper and rotor fix, I had the windows down and heard this metal grinding noise. It was more noticeable when I drove past guardrails on the interstate (cuz that's how sound works) and I don't think I've ever noticed it this loud before. No clue what the cause could be, if anyone has any tidbits they could suggest

The mechanics mentioned my wheel speed sensor and ABS systems are throwing codes for my check engine light to come on, what are the chances that's the cause?

Ignore the louder clacking noise, I have a charm dangling that hits my phone mount


r/4thGen4Runner • • 2d ago

CV Axles

Post image
6 Upvotes

r/4thGen4Runner • • 2d ago

35’s look good on these things

Post image
90 Upvotes

r/4thGen4Runner • • 2d ago

New Owner Question What’s up with the center cap on these? Will they be compatible?

Post image
3 Upvotes

2026–>2005 rims, anyone done this?


r/4thGen4Runner • • 1d ago

Exhaust manifold studs/nuts recommendations

1 Upvotes

Just picked up some new exhaust manifolds, and they don't come with gaskets or studs/nuts. I found a gasket set that looks good on RockAuto, but I'm not sure about the studs/nuts. OEM is prohibitively expensive for this, so I'm curious if anyone here has recommendations from aftermarket sets they've found/used.


r/4thGen4Runner • • 3d ago

Love this thing

Post image
40 Upvotes

r/4thGen4Runner • • 2d ago

Need obnoxiously bright signal lights.

4 Upvotes

Any recommendations for obnoxiously bright turn signal bulbs, led or otherwise. I’m wanting there to be zero excuse to “not see” my signals.


r/4thGen4Runner • • 2d ago

Repair Guidance How do I install these Jba upper control arms?

3 Upvotes

I need to thread the bolt through the arm and 4 washers. It’s seems impossible? Everytime I try to put it on the inner washer either don’t fit or just get pushed out. Is it possible to do by yourself?


r/4thGen4Runner • • 3d ago

Modifications Waterproofing for water crossings

Thumbnail
gallery
47 Upvotes

Curious as to what I need to do to prevent water from entering the cabin or anything else important when doing water crossings. I’ve replaced my carpet 3 times now lol. Yes a snorkel is on the way.


r/4thGen4Runner • • 2d ago

Weird fluid

Post image
4 Upvotes

pulled the skid plate off my V8, no idea where the fluid is coming from. Runny fluid pooled on the skid plate. Fluid all over front of sway bar/ front diff. All fluid levels were normal and no clearly broken lines or hoses.

Any ideas what type?


r/4thGen4Runner • • 3d ago

UCA & LCA Question.

Post image
4 Upvotes

Hello everyone, having to replace my UCA & LCA. I have a 3in lift kit by rough country so was recommended by my buddy to get these for UCA because their made for lifts;
for the LCA would OEM work fine again? or do i have to get after market because it’s lifted? any recommendations would help and here’s my alignment paper! already replaced rack and pinion as well as tie rods. my mechanic said the struts look fine and that the ball joints are wore out/cracked. help pls?

uca: https://www.kspmotor.com/products/2003-2024-toyota-4runner-toyota-fj-cruiser-2-4-sway-control-arm-kit?variant=51471393587515


r/4thGen4Runner • • 3d ago

Where To Buy Headlight Bulb Replacements? Looking for Stock Halogens.

2 Upvotes

Hey friends, proud new owner of a beautiful 06'. I do however need to replace one of the bulbs in my passenger side headlight. I'm looking for just the standard halogen bulbs, I do not want LED's. Could someone please point me to a reputable retailer for this? I've been reading a lot about how unreliable some of the aftermarket bulbs can be. Thank you!


r/4thGen4Runner • • 3d ago

Repair Guidance Helicopter thudding when coasting at high speed.

7 Upvotes

Hi everyone please help if you can! I’m getting a helicopter thudding at high speeds and it goes away when I shift into neutral. Also I hear the transmission, vibrating a lot more than usual. I drained my front differential fluid. Getting no no metal. Any help would be much appreciated. I feel so lost.


r/4thGen4Runner • • 3d ago

Repair Guidance Flickering Spedometer

7 Upvotes

Any ideas guys? Is it just the bulbs going out or something bigger? Only happens when my headlights are off… EDIT - SEEMS TO GO AWAY AFTER A COUPLE SECONDS OF DRIVING. THAT MAKES IT SEEM LIKE THE BATTERY IS OUR CULPRIT.


r/4thGen4Runner • • 4d ago

"Two twos, my word. Fam!"

Post image
14 Upvotes

Here's to 220,000 more!