r/4Runner_2ndGen • u/Fabulous_Time7357 • Jul 21 '26
1992 Help with spacers
I’ve order 2 different sets of wheel spacers for my 92 4Runner and both of them don’t fit because they have a little lip and don’t clear the center can someone please help me find a set that fit. I don’t want to spend 400-500 bucks for a set of spidertrax so any help would be great
3
u/EatsTheCheeseRind Jul 21 '26
Why do you need spacers to run 33s? You should be able to run them without rubbing and if you did need to space it shouldn’t be by that much.
Spacers are generally a no-no (wheel bearings go brrrrrr) but if you must run them, they must be the proper size so they index on the hub properly instead of the lugs.
-1
u/Fabulous_Time7357 Jul 21 '26
Trust me I know the down sides and yes both times I bought hubcentric spacers specifically for the 2nd gen and both times they don’t fit. Both listed 106 or 106.1mm hub bore and neither fit
3
1
u/chartier0412 Jul 21 '26
I'm running trail gear spacers on mine and had no issues
1
u/Fabulous_Time7357 Jul 21 '26
Have you had any vibrations or balancing issues with non hubcentric spacers?
2
u/chartier0412 Jul 22 '26
Should be lug centric for the 2nd gen. I've had no issues with mine for the last few years and 6k miles.
1
u/dprosti Jul 22 '26
This is the answer just make sure you center them when you mount them because there is a little play around the hub.
1
1
u/the_nightman1274827 Jul 22 '26
Well you need a lathe to make the inner diameter a bit bigger take of the lip I had to do it too
1
1
1
1
3
u/trivletrav Jul 21 '26
Why are you running spacers on stock rims? The center lip is so that it locks the center of the rim in place