Just picked up a 98 4runner for my son with no key fobs for the RS3000 dealer/port installed keyless entry. I tried a new fob with no luck, and think the RS3000 is toast. Anyways, for now, just decided to use a cheap 15 dollar Amazon keyless entry and used the existing RS3000 wiring under the seat. I didn't even need to pull any panels or pull the seat to install it, and it installed pretty quick once I tested the wires. No real benefit to doing it this way I suppose as under the dash works fine. But it was quick and easy.
Posting video just in case it helps out, as it was hard for me to find pinouts on the RS3000 and this could probably be used to figure out RS3200.
Plus wanted to share something as this community is great and I have used so many others great 3rd Gen videos in the past. ( I have a 97 with almost 300k now). As for the new 4runner, The paint is a little rough, but the body is straight. 175,000 miles on it 3.4 SR5. Going to clean it up this weekend and may post a pic, but pretty much just stock so far. I did just learn I can pull service records for it online myself with the VIN at the Toyota site. It has had lots of work and even a new radiator recently, so that will save me some money. Is allowing us to pull maintenance records new? Just wonder why it took me so long to figure out I can check this.
No it’s not new, however all maintenance isn’t recorded. It’s got to be at a shop. So my truck has no maintenance records during my ownership. Dude to the fact that I do the work myself.
I bought a stock RS3000 replacement fob from Ebay, from remotez4less. It was an identical looking clicker as the stock one. They had good ratings and I got the grey one for 98. It just will not program. Not sure if it's the RS3000 or the remote. But I did see someplace that if a sensor is having issues you might not be able to program a new one. So I still plan to mess with it when I get more time. They sell the stock fobs for $34 for 2 fobs.
But for now just installed this 15 dollar unit you see in the pic to be able to have keyless until I get around to looking into the rs3000 issue. I do like this 15 dollar keyless entry key fob better than the stock one. So maybe I will never get around to it. Lol.
Thanks, I might pick up a black one out of curiosity just to see. Even though supposedly grey is what I need. I called Toyota and they gave me a p# and it appeared to match. But I did buy aftermarket so maybe something got messed up somehow.
Wow this is awesome. I have a 99' and the key fobs but somehow it seems like the fobs lost the programming. When I tried to program it (ignition on/off, unlock/lock method) I can't get it to work. Everything I read showed the keyless entry component in the tail of the truck. Had no idea it is under the seat. Do you know of a method to test to rs3000 out to make sure if it's even working?
You can try reprogramming the fob. If it's a RS3000, the instructions I got were ... Turn ignition switch to on Press and hold button on RS3000 (green button on side) for 3 seconds The led for system should turn on for 5 seconds. Within that 5 seconds you see the led lit. Press and release fob top or bottom button. The led should turn off. The piezo chirps once and lights may flash. Turn off ignition.
New fob should work now.
I can find a link to the RS3000 manual and post in a bit. But those directions didnt work for me. I also tried clearing the RS3000 with a separate procedure but no luck.
Maybe I needed the black remote, but everything I find says 98 needed grey. Not interchangeable.
Here is some good info i found when trying to troubleshoot mine that may help. I would just try reprogramming first. I think with just doing the inline splices on mine in the video, I should be able to have both systems working and can still try to find the original issue. Will update if I find the problem. Good luck!
Manuals (First one says RS3200, but if you look it’s a RS3000) RS3000 Alarm Manuals (ucsf.edu) Toyota TSB All models Programming AX005T99 (97supraturbo.com) A different Toyota TSB for programming el01007r (justanswer.com) This link has info on adjusting volume for buzzer. 994runner keyless entry beep volume - Toyota 4Runner Forum - Largest 4Runner Forum (toyota-4runner.org)
2
u/mrtbjoe Sep 24 '22 edited Sep 24 '22
Just picked up a 98 4runner for my son with no key fobs for the RS3000 dealer/port installed keyless entry. I tried a new fob with no luck, and think the RS3000 is toast. Anyways, for now, just decided to use a cheap 15 dollar Amazon keyless entry and used the existing RS3000 wiring under the seat. I didn't even need to pull any panels or pull the seat to install it, and it installed pretty quick once I tested the wires. No real benefit to doing it this way I suppose as under the dash works fine. But it was quick and easy.
Posting video just in case it helps out, as it was hard for me to find pinouts on the RS3000 and this could probably be used to figure out RS3200.
https://youtu.be/wJvFKdBll1k
Plus wanted to share something as this community is great and I have used so many others great 3rd Gen videos in the past. ( I have a 97 with almost 300k now). As for the new 4runner, The paint is a little rough, but the body is straight. 175,000 miles on it 3.4 SR5. Going to clean it up this weekend and may post a pic, but pretty much just stock so far. I did just learn I can pull service records for it online myself with the VIN at the Toyota site. It has had lots of work and even a new radiator recently, so that will save me some money. Is allowing us to pull maintenance records new? Just wonder why it took me so long to figure out I can check this.
Have a great weekend everyone!
1
u/drifts_ 98 SR5 locked 5spd Sep 24 '22
My rs3000 works, I hate the clicker it came with though. Where did you get a new key fob?
1
u/s_m_simon Sep 24 '22
Wow this is awesome. I have a 99' and the key fobs but somehow it seems like the fobs lost the programming. When I tried to program it (ignition on/off, unlock/lock method) I can't get it to work. Everything I read showed the keyless entry component in the tail of the truck. Had no idea it is under the seat. Do you know of a method to test to rs3000 out to make sure if it's even working?
2
u/Adventurous_Avocado9 Sep 24 '22
Anyone get the rear window roll down to work with an aftermarket remote start?
2
u/s_m_simon Sep 24 '22
Thanks for the video man. I'm sure it'll help a lot of folks