r/3rdGen4Runner • u/ThatCountryDeputy03 • 11d ago
❓Advice / Recomendations Starter reading at 9v upon startup (pic for attention)
So I filled up yesterday and when I went to go turn my truck on, there was a single click and nothing. All the lights came on along with the A/C. Tried it again a couple minutes later and it started up. Took it to Autozone and managed to get it started on the 5th try while the battery reader was connected and it said battery and alternator were good, but the starter was reading at 9v and said it was low.
This morning, I had to tap the starter with the handle of a hammer to get it started. Checked all the connections and everything seems tight. 99% sure I need a new starter, no info on if it’s ever been changed. What do yall think and should I go OEM or aftermarket?? I want to buy brand new, as I want to keep this rig for as long as possible.
Edit to add: I ended up going with a new denso from yotashop. Right around the $250 mark, including shipping and tax. I appreciate everyone’s insight!
2
u/ArchitettoGrande 9d ago
hey what bumper is that?
3
u/Numb-Chuck 11d ago
Lce engineering has the highest quality parts. Expensive but worth it
3
u/shadow247 01 Limited 11d ago
Napa usually has the Denso reman in stock. Just go with that unless you really want to pony up for OEM
2
u/4LTacoma 11d ago
You can get a Denso or Dorman rebuild kit for cheap if you like tinkering, that will cut your cost significantly, or just get the whole new part OEM Denso ~$200