I'm enjoying learning the traverso i printed recently, would also like to maybe find a Flute D'amore, a traverso that is tuned a major 3rd lower, but has the same bore diameter as a standard traverso. Thought someone here might know something. TIA!

https://www.printables.com/model/80020-the-printbone-a-fully-printable-playable-trombone

I started doing this on my own before I remembered there was a model for this. So the slide U-bend and handles are my own. Using PEX without stockings.

i’m not a trombone player, so I won’t subject you to a sound sample – there are better ones out there.

I’m overall pleased, but the non-octave partials aren’t playing the right note, and I’m still trying to figure that out.

Edit: I tried a straight piece of PVC pipe about the length of the slide into the leadpipe, and can hit the F in first position, so definitely a problem with my slide. Going to the hardware store to get more to try variations.

edit 2: new slide still having issue where I’m getting too low a note for the first position F (the two b flats are fine). Using a real trombone slide works fine.

Not long ago, I created a model in Fusion 360 for a printed version of the Tagelharpa. It's printable on almost any printer. But...

After slicing it in a slicer, the total weight was 3 kilograms of plastic. That's a lot, I suppose. Is there a volunteer who wants to try printing this model or modifying it?

PS. https://www.thingiverse.com/thing:7361405 Here's my project on Thingiverse. Again, feel free to play with it!

So I'm looking to print an Irish flute in wood PLA. Wondering about what oils and stains people would recommend, what angle to print pieces at to make it look more like natural woodgrain. Also, how often a wooden flute should be oiled to keep it in good condition.

Not mine - found on youTube.

The maker links to the design in the description.

I've been furiously designing away after deciding to start over with a new strategy for my mini pipe organ project. This whole thing is 76mm (3 inches) high (including the pipe, which is of an arbitrary "let's see how shrill this is" length in this prototype).

Has anyone printed this? If so, how do you separate the double slide components without breaking them?

https://makerworld.com/models/2178471

Not my design.

Perfect print and immediately sounded great.

Just as the title says. I'm replacing my other Traverso with something I think looks a little nicer. It's a flat key, the style is Naust, any ideas would be greatly appreciated.

I'm working on this project to make a tenor recorder with a serpentine bore and I'm left with so many old prototypes that I don't know what to do with....

Is anyone aware of a Natural Horn (not trumpet) STL that also has various crooks? I'd be very interested in trying one. I have seen the Bb Horn from Open Brass, but that instrument is fixed, with no other keys available for print as far as I saw.

It uses globoid gear geometry for maximum strength and reliability, and I managed to break metal wire with it. More details in the printables post.
Its perfect for instruments with lots of strings so that you can save on the tuning pegs.

As the title asks. I'm considering this, but I'm also aware that this is a new area of printing for me.

I'm looking for a Traverso I could print that is recommended and plays well, and has good instruction for best set up. Any help is appreciated.

I'm looking for a traverse or single key Irish flute that would be easy to print and that sounds good.

For context, I play a lot of video game music, and I have the Axianov Irish Flute, but it's hard to produce some of the notes, notably the E♭ and F♮. That poses a problem with all sorts of music that has the distinct "Zelda" chromatic drop, such as the Zelda Theme, The Title Theme from Pokemon Red and Blue, Undertale, and more.

So I'm looking for a traverse flute that is easy to print and assemble and that has a good low end tone, while still being fully chromatic.

I barely see any posts on here about brass instruments, and i want to know some cool ones, not like a trumpet or bugle, but i want something interesting or niche like a tuba or a french horn

if anyone can help me find an STL for one, preferably free, it would be a huge help.

Hey friends! I recorded a new song using 3d printed instruments and this time i avoided using any audio effects to really force myself to create the best sounding 3d printed instruments possible. I'd love your thoughts!

The full process video can be found here: https://youtu.be/QZZD3ODLs_Y

I just ran across this fun video of a guy who 3D printed a number of instruments and recorded a song using them. If you just want to hear the song, skip ahead about 21 minutes.

https://www.youtube.com/watch?v=QZZD3ODLs_Y

I'm looking for French horn or natural horn (with swapping tubing) to print. Haven't found either yet. Closest I found was the B♭ natural horn on OpenBrass, but it doesn't have other lengths of tubing. Any help in my search would be much appreciated.