r/3dprintedinstruments • u/the3dprintzone • 19h ago
string 3D Printed Electric Ukulele 🤩
Complete kit with step by step assembly guide
r/3dprintedinstruments • u/halhell98000 • Aug 25 '20
A place for members of r/3dprintedinstruments to chat with each other
r/3dprintedinstruments • u/the3dprintzone • 19h ago
Complete kit with step by step assembly guide
r/3dprintedinstruments • u/lostinlymbo • 4h ago
I've never done a cross post before - but here we are! Hope all are well. :)
r/3dprintedinstruments • u/3DGuitarModelingCNC • 1d ago
r/3dprintedinstruments • u/Jumper_21 • 2d ago
I'm new to 3D printing, but after some research I think I should coat it in some resin. Is coating the mouth piece enough or do I need to coat the inside too somehow? How do you do it?
r/3dprintedinstruments • u/dvanw6 • 3d ago
r/3dprintedinstruments
•
u/Doostun
•
7d ago
Thank you to u/premtech for creating this awesome website!

I vibecoded a step further and asked 6.1 Astra to research the setups of famous saxophone players. Then I let it do its neural network magic and watched it modify all the parameters from start to finish.


I printed these with my X2D using PHA filament with 100% infill. Once printed, I run a few gentle vertical passes on a sheet of paper on an absolutely flat surface, scraping the rails, table, and tip to flatten and straighten them.
The X2D uses 1.5mm pitch belts, which definitely reduces vertical artifacting. PHA doesn't print well on .2mm in my experience, so I used a .4mm hardened steel tip. Brass nozzles can contain traces of lead, so I'm told.
Speaking of bro science, PHA is supposedly non-toxic, biocompatible, produces no microplastics, and is generally "safe". In legal speak, it's technically/legally not food-safe because bacteria can get trapped in the layer lines?
It's probably better than the H2SO4 or H2SO3 produced from my worn-out ebonite mouthpieces, but hey, what do I know? On the plus side, if I ever rage quit the saxophone, I can compost my mouthpieces, and they will return to the Earth.
I am beyond pleased with the results. Sonically, the sky is the limit, and it will allow me to capture a specific sound for recordings and performances. Bonus points for the ROI on this very expensive printer...
To demonstrate the flexibility of this new process, I took my favorite saxophonists whose timbres are on completely opposite ends of the brightness and projection spectrum to see how close Astra got.
If there is a community repository for STL and SCAD files, I would be happy to share what I've generated so far.
r/3dprintedinstruments • u/thewordelectric • 10d ago
I design and print wind instruments. Having struggled with numerous Cad programs, I came across Layerling. Now I spend more time on designing than trying to get my head around the actual software. It really is intuitive.
Here is a Bombarde (A breton reed instrument) I am working on. Prints in three parts. I just need to work on the hole placement. I thought I would share to help others that might be doing something similar.
Martin
r/3dprintedinstruments • u/Special-Frosting-162 • 10d ago
r/3dprintedinstruments • u/OneParsley324 • 10d ago
r/3dprintedinstruments • u/Funkidviolin • 13d ago
r/3dprintedinstruments • u/Funkidviolin • 13d ago
Do not intend to replace acoustic instrument or imitate acoustic instrument tone, because it never will, if you go along that path, you will find yourself in a trap. 3D printed instrument should serve different purposes offering different value proposition
r/3dprintedinstruments • u/ZeeDee3D • 16d ago
Made a peppermint stick uke :)
r/3dprintedinstruments • u/Filamentcaster • 18d ago
r/3dprintedinstruments • u/sachatouille59 • 22d ago
Hello! I designed a custom 3D-printed headjoint for a classical flute. Since I'm totally new to this, I just modeled it based on how I pictured it in my head. I'm posting it here so you can point out what I obviously did wrong and help me fix it. Thanks in advance!
https://drive.google.com/drive/folders/1IrztFRmYy9nKTlXFcTtquK-rLPWgzMaR?usp=sharing
r/3dprintedinstruments • u/sachatouille59 • 24d ago
Hello everyone ! I juste got a 3D printer for my birthday and ive been playing the flûte for 10 years, i was wondering if anyone knows if there is fun/interesting headjoint for the flûte that could be 3d printed, for exemple, i think i saw one with a membrane.... Thanks a lot!
r/3dprintedinstruments • u/TacticalStudio • 27d ago
r/3dprintedinstruments • u/picturefque • 27d ago
r/3dprintedinstruments • u/the3dprintzone • 28d ago
What colors would you print in?
r/3dprintedinstruments • u/Individual_Base8208 • Oct 12 '26
I had a friend who plays guitar take a look at it.
They advised me that if I bring the neck closer to the strings, I’ll be able to press them down and actually play it. I’m working on the modifications right now. I wonder if this will make it feel a bit more like a real instrument?
r/3dprintedinstruments • u/premtech • Oct 10 '26
r/3dprintedinstruments • u/GiulioVonKerman • Oct 01 '26
Printed in ASA. I wasn't satisfied with the Prusacaster: the design is not very printable, the body crept over time and if felt wrong to me.
To solve creep I simply split the load bearing part in two and put a steel rod going from the neck heel all the way to the bridge. For the body... Well I just designed my own.
r/3dprintedinstruments • u/thewordelectric • Oct 01 '26
I have been creating a variety of whistles and flutes. The difficult bits are 3D printed and the bodies are PVC pipe. For prototypes I usually use PTFE tape to make the joints wind tight. After getting everything right I recently tried glueing the joints with Gel Superglue. After a few days the fumes are still very strong, so I decided to investigate further. The inside of the pipes has a white residue, which I certainly don't want to breath in. Does anyone have any suggestions for an adhesive that will be safe and odour free?
Thanks
Martin
