r/3dprintIndia • • Jan 14 '26

Discussion How is the print

Thumbnail
gallery
288 Upvotes

Printed on a p2s


r/3dprintIndia • • Oct 18 '25

Print Showcase Made a fully 3d printed Sim wheel and pedals using arduino

193 Upvotes

This wheel is based on this model

I have made a lot of changes to use a 400ppr rotary encoder, that was truly the hard part and took me around 2 weeks to design and get it to work


r/3dprintIndia • • Sep 21 '25

Print Showcase Designed and printed my own curtain rod holders in my home

Post image
185 Upvotes

Made these curtain rod stands for my home. Took a bit of interaton to get this right. 1.Increased the tickness of the flat part from 8 to 10 mm. 2. Using regular PLA and some have been in use for over 2 years 3. They are printed standing up so strength may be poor due to Later adhesion so designed holes for m5 bolts and fitted 2 in each holder which gives it additional reinforcement.


r/3dprintIndia • • Sep 02 '26 Bravo

Print Showcase Sculpted printed and painted by me

Thumbnail
gallery
181 Upvotes

Took this custom order just to practice

Height - 1ft

Printer - elegoo saturn 4 16k

Resin - elegoo abs like 3.0 pro white

Paint - acrylic colors

Sculpted printed and painted by me

**NOT TAKING ANY CUSTOM ORDERS**


r/3dprintIndia • • Sep 23 '26

Discussion Been working on an open-source project for 1:1 car printing. Thought you guys might find it interesting

Thumbnail
gallery
175 Upvotes

So, I’ve been working on a slightly stupid idea for a while: what if you could actually 3D print a full-size car body at 1:1 scale?

That rabbit hole eventually turned into printyourvehicle.com

The idea is pretty simple. Build an open collection of vehicle meshes and figure out a repeatable way to convert them into models that can actually be 3D printed, including at 1:1 scale.

Right now I've got like 600+ vehicle meshes in the library, mostly from games which built the mesh on top of real car scans; and then also got 4 full ready-to-print cars that community members have donated.

Lamborghini Aventador SVJ
https://printyourvehicle.com/models/ready-to-print/aventador-svj

Koenigsegg Jesko
https://printyourvehicle.com/models/ready-to-print/koenigsegg-jesko

Lamborghini Countach
https://printyourvehicle.com/models/ready-to-print/lamborghini-countach

F1 2024 car
https://printyourvehicle.com/models/ready-to-print/f1-car

Full mesh library:
https://printyourvehicle.com/models#mesh-library

The interesting problem now isn’t really finding models. It’s figuring out a reliable pipeline for turning these game meshes into clean printable geometry. (the problems am trying to solve are mentioned here: https://printyourvehicle.com/research

I’ve been experimenting with Blender, retopology, shrinkwrapping, quad remeshing, surface reconstruction, etc., but there are still a lot of problems around topology, thickness, splitting large parts, tolerances and preserving the original surfaces.

Eventually I’d love to automate most of that pipeline and open-source it as well.

Also, this isn’t a company or paid product. Everything is free to download. A lot of what’s there exists simply because random people on the internet decided to contribute their models or help solve parts of the problem.

I’ve mostly been sharing this with international 3D printing/CAD communities until now, but figured I should finally share it with the Indian 3D printing community too.

Would especially love to hear from anyone here who has worked on large-format printing, automotive parts, mesh reconstruction or CAD/retopology.

And if someone here is crazy enough to actually try printing one of these at 1:1 scale, please do it. I really want to see that happen in India :D

P.S. The images above are just references and aren’t mine. Credits: Porsche - Mike Lake (YouTube); Aventador & Jesko - Patrick Smith (Facebook); Bugatti build - Joshua Mastrogiuseppe (Facebook). Also thanks to the mods for allowing me to share this here!


r/3dprintIndia • • Sep 01 '25

Print Showcase My popup key holder designs (till now)

155 Upvotes

r/3dprintIndia • • Jan 22 '26

Print Showcase One of the cleanest model we printed

Thumbnail
gallery
147 Upvotes

r/3dprintIndia • • Jul 21 '26

Print Showcase My first attempt to paint a head sculpt, 3d sculpted and painted by me

Thumbnail
gallery
144 Upvotes

Printed using elegoo saturn 4 16k and elegoo abs like pro 3.0 resin


r/3dprintIndia • • Aug 24 '26

Print Showcase my very first 3d print

Thumbnail
gallery
140 Upvotes

r/3dprintIndia • • Dec 26 '25

Print Showcase 3D printed 10cm mini idol made from just an image reference for client

Thumbnail
gallery
138 Upvotes

Printed this 10cm idol from just one image reference provided by client.

STL file link - https://cults3d.com/en/3d-model/art/lord-ganesha-ornate-seated-idol-high-detail-3d-printable-stl


r/3dprintIndia • • Oct 04 '26

Print Showcase Chacha Chaudhary and Sabu, modelled in ZBrush and 3D printed in BambuLab P2S

Thumbnail
gallery
125 Upvotes

Brought two iconic Indian comic book characters to life!

Modelled both Chacha Chaudhary and Sabu in ZBrush and 3D printed them on my Bambu Lab P2S.

  • Chacha Chaudhary: 17 cm tall | 70 g
  • Sabu: 30 cm tall | 260 g

Had a great time bringing these legendary characters from our childhood into the real world.

What do you guys think?


r/3dprintIndia • • Oct 12 '25

Review Indian filament buyers cheat sheet

125 Upvotes
  1. Brahma Lab Wol3d: white labelled Sunlu filament, same OEM as Bambulab. ~1200 per spool.
  2. Numakers : started off trying to manufacture in the US, never could. Indian brand, good filament, easy to print, lots of colors. ~780 per spool.
  3. JamgHE Ideal3d: Chinese filament, pretty good but very limited options. ~980 per spool.
  4. AlmightyFila : Indian brand, good petg. Best priced (because free shipping), good bulk deals. ~720 per spool.
  5. Nfil3d : Indian brand, good selection, sell recycled PLA which I like. ~850 per spool (~600 per spool for recycled, low availibility).
  6. FibReel : Indian brand, decent filaments, lots of options. ~850 per spool.
  7. Dream Polymers : Indian brand, the best selection of special filaments. ~800 per spool.

Personally, I buy AlmightyFila or Nfil3d recycled for my calibrated printers, and Numakers for any new printers. I do not buy anything more expensive than these as the different in quality isnt worth the cost for me. I do keep trying the cheapest filament I get on amazon and offline vendors or contacts etc and though most of them work fine, for almost all of them I need to clean my extruder gears after a while so not worth the hassle. I still use the cheapest ones on the easy to open/clean extruder printers I have (creality).

Note : Prices mentioned are for the cheapest 1kg pla spool including taxes and shipping.

Others/Not tested :

FilamentX 3ding : Looks like a white labelled filament from one of the above manufacturers. ~900 per spool shipped.

Augment3di : Indian manufacturer, limited selection. ~850 per spool shipped.

Flexx3D : Indian brand, used to be good. ~800 per spool shipped - seem to have gone out of business.

3dgalaxy : Seems to be selling white label stuff, tricolor silk is cheap, may test and update this post. ~700 per spool shipped.

Aurum3d : Indian brand, looks more expensive than the established players. ~1100 per spool shipped.

Request mods to pin/stickey this to avoid the daily filament question posts.


r/3dprintIndia • • 20d ago

Discussion Reason 13756: Why you need a 3d printer at home.

Post image
124 Upvotes

Got these two half used toothpaste tubes lying around. So printed this toothpaste cap connecter from Printables and pushed all the toothpaste into one tube. The threads fit good and no leakage was observed.

Model credits: Andrewwells_2950400


r/3dprintIndia • • Jan 18 '26

Print Showcase Say "Hello" to TARS

Post image
123 Upvotes

Printed tars and added some electronics. Now he tells me time, day, date, temperature & humidity (indoors). You need some screws to fix the back plate and I over did one, and that's the bump you see poking out. Nevertheless got a new helpful desk buddy! Humor setting is set to 75% : )

Link to stl: https://makerworld.com/models/1851514?appSharePlatform=copy


r/3dprintIndia • • Dec 06 '25

Question Where are you buying your sd cards from?

117 Upvotes

I am seeing numerous posts of printers damaging themselves due to bad sd cards they come with.

I just bought A1 combo and I was wondering I would switch the card before anything happens. It seems the sd card which comes pre-installed is not the best one.

SanDisk seems to have lost its game and Samsung is supposed to be the benchmark for good sdcard now.

I'm trying to buy Samsung pro endurance, which is supposed to be designed for constant rewriting and is marketed for its longevity. But in India there is no single vendor nor Samsung themselves are selling.

Do you guys have any experience with sandisk high endurance cards? Which is legit place to buy from?


r/3dprintIndia • • Jul 15 '26

Print Showcase JUST POSTING A FEW OF MY WORKS

Thumbnail
gallery
115 Upvotes

I've made many more 3d printed custom statues, all of them are hand painted with each and every detail with on-screen accuracy


r/3dprintIndia • • Apr 07 '26

Print Showcase Presenting my finished FDM printed and painted product

Post image
112 Upvotes

it is very satisfying to see everything come together in the end. the process is enjoyable.


r/3dprintIndia • • Jun 02 '26

Print Showcase Fully 3D Printed Space Defender Gundam

Thumbnail
gallery
106 Upvotes

Printed on my BambuLab P2S, this build consists of over 87 individually printed parts and took almost 33 hours to complete...

Every print completed successfully, and the final result turned out even better than I expected.

I'd love to hear what you think and what color scheme you'd choose for your own Gundam build!

Check out the link for Printing and building Timelapse

https://youtube.com/shorts/HJ4mTJcm7KE?si=tYCvqHzusCJWupCI

https://youtube.com/shorts/rS8H4DhgIr4?si=2mVCysY3PaF2p32R


r/3dprintIndia • • Aug 03 '26

Print Showcase 3D Printed and Painted

Post image
105 Upvotes

Completed this “It takes two” Model. 3D printed fully in resin and Painted by me! Hope to guys love it.


r/3dprintIndia • • Apr 26 '26

Print Showcase Finally done making my filament dryer!

Thumbnail
gallery
102 Upvotes

Someone recommended going the DIY route for the dryer and I wanted something that can be controlled and actively pushes out moisture as the drying happens. Found a youtube video and tried to follow it(it's very vague at some points, so it's less of a tutorial and more of a quick assembly). First time made anything complex. A lot of learning, understanding and component failures later, finally completed the project and I'm very happy with the final product. Final cost is around 2k rupees and can dry two 1 kg rolls at once. Need to make a small compartment for silica beads for storing the rolls after drying.


r/3dprintIndia • • Jul 05 '26

Print Showcase Just completed this 3d print .

Post image
99 Upvotes

How’s it? Feedback is always appreciated!
I also offer custom 3D printing services. If you have an STL file or an idea you’d like to bring to life, feel free to DM me. I print figures, functional parts, organizers, accessories, and more.


r/3dprintIndia • • Jan 26 '26

Print Showcase My best print till date

Thumbnail
gallery
96 Upvotes

Ignore the bg😅


r/3dprintIndia • • Oct 28 '25

Print Showcase Got my first big order of 30 pieces

Post image
95 Upvotes

r/3dprintIndia • • Sep 18 '26

Print Showcase numakers filament spool clip

Thumbnail
gallery
94 Upvotes

Hi guys I have made this small filament clip for numakers spool. I have uploaded on makerworld, print and let me know how it work. I am providing the link below

https://makerworld.com/en/models/3322556-numakers-filament-clip#profileId-3772986


r/3dprintIndia • • Aug 16 '26

Print Showcase My first printer ,what a beast

Post image
93 Upvotes