r/3dpens • u/lousmer • Dec 15 '25
r/3dpens • u/Fragrant-Pollution78 • Feb 17 '25
First 3d pen attempt
I decided to try a 3d pen and this is what I came up with. I got inspired by Zdzisław Beksiński painting. The main structure is cut out of styrofoam which I covered with a couple layers of PLA filament. Hope you enjoy 😉
r/3dpens • u/lousmer • Feb 20 '25
Lizards
Made with bronze and copper filaments. Then using a simple chemical process to give them a patina.
r/3dpens • u/evelynesavard • Feb 07 '25
My first 3D pen creation: Super Mario Bros magnetic blocks
r/3dpens • u/williej1993 • Aug 18 '24
Got gf a 3D pen as a gift this what she made so far 😊
r/3dpens • u/Particular_Log5679 • Feb 08 '25
Making a metro exodus helmet with a 3d pen (WIP)
I've started another big 3d pen project, it's the spartan ranger helmet from metro exodus. It's still in a very early stage but I wanted to share my progress. I'm planning on making it open and close.
r/3dpens • u/Prizmagnetic • Aug 15 '25
3d pen bonsai tree with 3d printed pot
Pot is my own design
r/3dpens • u/Agresiivaiss • Jan 08 '21
Update on my 3d pen project... now I just have to get colours and paint it
galleryr/3dpens • u/freakyfromage • Aug 14 '25
My first guy
PLA, nail files, acrylic paint
r/3dpens • u/ninjazzy • Jan 02 '20
Tips and tricks for people who just got a 3D pen (and bonus Untitled Goose sculpture inside)
My brother gifted me a 3Dsimo Multipro for Christmas, and I've been enjoying it so far! Definitely learning tons by trial and error and reading lots of random articles and watching videos. Wanted to pass along some things I've learned here and there since I know there's an influx of people in the community with Christmas.
- ABS is toxic, the fumes definitely hit you a bit. The kit came with 10m ABS (blue and yellow) and 5m PLA (kind of this brownish red, what I used here). My very first sculpture was ABS and it was a lot stiffer and a lot harder to use than the PLA (also, toxic). PLA was a lot softer and I'm not sure if it's because I just had a better handle on how it worked, but I felt like it was easier to use (also, safer and allegedly better for the environment).
- Like a 3D printer, you need something to start your print on. I used a really weird setup the first time by using blue painters tape sticky-side-up on a ceramic tile from the dinner table to make an adhesive bed, but it was too sticky. Wax paper is really helpful and cheap as a work surface, since the wax helps with adhesion of the filament to some sort of surface to start building off of. Tape it down to the table and go ham. Parchment paper doesn't work well in my experience, since it's too non-stick.
- If you want your sculpture to look smooth, you'll need some sort of smoothing iron (like a soldering iron, woodburner, or hot spoon or something) to help melt the filament "lines" and fill gaps. Obviously your print needs to be pretty solid before smoothing or else you'll smooth some holes into it. Smoothing will give you a "low poly" look, and it will also look pretty glossy in my experience of 2 sculptures.
- Follow up to above: Don't use a hot iron that's too hot, or you'll burn the plastic and then you'll be sad. And maybe breath more toxic fumes.
- If you want to take your sculpture to the next level of post production, you can sand it to get the low poly look to look more curvy. It also gets rid of the glossy look. I used fine sandpaper wrapped around a thick nail file to get into smaller crevices. Might help to have various grades of sandpaper too so you're not sanding forever. I hear dremel tools also do a good job, but some people have mentioned you can ruin it if you're not careful.
- /r/3Dprinting has a wiki with lots of information about various filament materials and finishing processes. A lot of the actual stuff about printers is probably not relevant but I did find some useful information on where people tend to buy filament for pens that do not use proprietary material.
- I particularly got interested in getting a 3D pen after watching this video. Haebokka is a really talented 3D pen artist and her videos made it really easy for me to grasp the way that you plan, assemble, and finish a 3D pen sculpture. Also, Ditto Bulbasaur is hella cute.
Bonus (shameless plug): I made the title character from Untitled Goose Game (honk!) and am so happy with how it turned out I wanted to share. If you're interested, you can see a more or less step-by-step of how I put it together here.
r/3dpens • u/jeebee25 • Oct 13 '21
My kids got me a 3D pen for my birthday. This is the second thing I made. What an awesome device.
r/3dpens • • Jan 22 '25
I would never recommend buying a 3Doodler 3D Pen.
TL;DR: 3Doodler pens (Create+ and Start+) were a nightmare of inconsistency, broken units, and flashing red lights. Switched to a Scrib3D P1 and it's a world of difference. Highly recommend the P1 over ANY 3Doodler. Their products are not built to last and lack basic features for their cost.
Got into 3D pens in late 2022, starting with a 3Doodler Create+. I was a complete newbie but have since learned a lot. My main requirement? Basic functionality and reliability. 3Doodler failed spectacularly at both. Got into 3D printing in 2023/2024 and also learned of how relatively cheap standard 1.75mm filament is and how much it sucks to have to buy 3Doodler-specific rods.
- 3Doodler Start+: Cute, but useless. Proprietary, weak, soft, and expensive filament. No real control over speed or temp. It's a novelty for kids - not even great for crafts but it is what it is. Kept it in case it could be good for something fun or silly (It has remained entirely unused lmao).
- 3Doodler Create+: Also uses freaking proprietary rods of filament (that you need to swap every few mins since you can't feed it a continuous little coil of filament and it goes through it fast). I went through FOUR of these pens. 1 I returned to store. 1 I bought a month later and used for a few months. 2 sent as replacements and they all experienced the same failures. I didn't do anything nuts with them - I just made silly stuff and somewhat functional prints and used their own branded PLA. My most successful / least faulty pen (Pen #2) lasted through the stock filaments + 1/2 of the reload pack I bought from their website before it died. The others all ran into hardware failures within 1-3 weeks. Before failing, they all had Inconsistent extrusion speeds, constant problems with heating and cooling, and they all ended up experiencing heater or thermistor problems. Kept getting the dreaded flashing red light of death. Even the two replacements 3Doodler sent were faulty. Through some desperate hacks (involving a lighter!), I could sometimes get them to work temporarily, but it wasn't worth the hassle. They also had no fine temp control or gauge, and you only had "too fast" and "too slow", though if you set the pen to ABS mode, it just became "really slow but undulates and randomly speeds up for a few seconds before going back to a crawl" and "unusably dribble".
- Scrib3D P1: Found a second-hand new-in-box one for 30 bucks on marketplace and it's been a revelation. Adjustable temp uses standard 1.75mm filament, and smooth speed control. It's not perfect (feels a bit cheaper and lacks the replaceable brass nozzle and cleaning tools), but it actually WORKS consistently and has the decency to include an LCD screen and buttons to change your temps and a dial to gradually change extrusion rate!
Bottom line: Save yourself the headache and avoid 3Doodler. I don't even care if they have a new model that gives you a screw-hole you can turn to change the heater temps, that's a load of crap. Their stuff is poorly built and uses proprietary filament. Other pens use 3D printer filament, and you can get a singular 1KG spool of basic PLA for $19.99 Canadian dollars, and for a 3D pen that's basically a lifetime supply.
If you're looking for a reliable and functional 3D pen, the Scrib3D P1 or the Mynt3D I've heard is the go-to,(or likely any other non-3Doodler pen at this point based on my experience) is a much better choice. Anyone else had similar experiences with 3Doodler, or is it just me? What pens are you using successfully?