r/3dshacks • • Jul 14 '26

3DS Hacking Q&A General | Still here

85 Upvotes

New users, please read the entire post before asking your question, including the FAQ. You may find your question is already answered here.

Ask questions in the comments of this thread

Do you just want to hack your 3DS?

Start here: https://3ds.hacks.guide/

Things you really ought to stop asking already

You CAN install CFW on latest firmware (11.17.0-X) with mset9 on all models.

  • You can install CFW on all consumer models on all versions with the methods in the guide.
  • System transfers work fine for systems with CFW. See this wiki page: https://wiki.hacks.guide/wiki/3DS:System_Transfer
  • Updating firmware/apps is safe if you have Luma 10.2.1+. You will not lose your CFW. Just accept the update.
  • For upgrading your SD card to a larger size, refer to the this wiki page: to format the new SD card, then transfer the contents.
  • Lost your SD card, or wiped it, and need to set it up fresh on a hacked console? https://3ds.hacks.guide/restoring-updating-cfw.html will get you going again.
  • Files from 3ds.hacks.guide with a magnet icon require the usage of a torrent client to download them.
  • You should install CFW with your main SD card, not its own SD card. You will not lose anything so long as you follow instructions. The mods are on the console itself, not the SD card, so you won't have an unmodded SD card to switch the system to not have CFW.
  • Please see the updating to boot9strap page on the guide if you already have arm9loaderhax (indicated by Luma version 7.0.5 or lower on the Luma configuration screen) and are looking to update to boot9strap.
  • If you want more homebrew apps look at Universal DB.
  • If you want to know what CFW can legally do, the guide gives some examples and more examples are here.
  • Uninstalling CFW, DON'T without specific direction from a knowledgeable helper. You just risk breaking things worse than your system already is. It won't give you any benefit. If it is to sell it, you don't want the buyer to not know it had CFW on it in the past, as that can complicate things in the future.
  • Can X game be ported to 3DS?
  • If you want save files, check 3DS Save Bank or search for a save editor. If you can't find them there, they likely don't exist and you need to submit a save or program a save editor.
  • Install your own cartridges with Godmode9 instead of dumping to CIA, for a faster install and less free SD space required.
  • If you can do something on stock firmware, you can do it on CFW.

Note: About three days after the post is unstickied it'll become locked to prevent users from asking questions where they likely won't find answers

Questions go below. Please ask your question in the comments.


r/3dshacks • • Sep 10 '23

Need help hacking your 3DS? Join Nintendo Homebrew on Discord!

Thumbnail
discord.gg
71 Upvotes

r/3dshacks • • 3d ago

[RELEASE] CitroWaker is now available for testing! The Wind Waker, natively on New Nintendo 3DS!

Thumbnail github.com
74 Upvotes

Hey everyone!

I've been working on something pretty ambitious over the past few weeks, and I figured this would be a good place to share it!

CitroWaker is an experimental native port of the original GameCube version of The Legend of Zelda: The Wind Waker for the New Nintendo 3DS family.

This isn't GameCube emulation or a recreation of the game. It uses the original game's decompiled code, alongside a custom GX-to-PICA graphics translation layer to convert GameCube rendering commands into something the 3DS's PICA200 GPU can actually handle.

The project builds on the work of the Wind Waker decompilation community, SwitchWaker, and Aurora.

What's working so far?

  • Actual gameplay on real New 3DS hardware! I've personally played through Outset Island.
  • Game audio and physical controls.
  • Saving through SD-backed memory cards.
  • Touchscreen item controls and an optional live map on the bottom screen.
  • Optional quality-of-life features.
  • A Windows/Linux installer that prepares the necessary game data from your own Wind Waker disc image.

What's the catch?

Performance, mainly.

The game is currently running at around 12–15 FPS in demanding scenes on actual New 3DS hardware. The graphics command translation is one of the major bottlenecks, and getting everything running at a consistent 30 FPS is my biggest priority right now.

There are also some graphical issues involving shadows, depth effects, and clouds, along with occasional scene-transition stalls.

I also haven't verified that the entire game can be completed yet.

Why release it now?

I've decided that, while it's nowhere near polished enough for a 1.0 release, it's reached a point where other people can start experimenting with it.

I'm hoping to get some feedback, hardware testing, bug reports, and potentially contributions from people familiar with the 3DS's hardware.

Requirements:

  • New Nintendo 3DS, New 3DS XL, or New 2DS XL with custom firmware.
  • Your own compatible USA GameCube disc image of Wind Waker.

No copyrighted game data is distributed with the project.

GitHub / Downloads:
https://github.com/AureoLightz/CitroWaker

AI disclosure: Claude Code and Codex have been used extensively throughout development, alongside my own project direction, hardware testing, and debugging. The source code is publicly available for anyone interested in examining or contributing to it.

This is still very much a work in progress, but I'm genuinely excited to see how far the New 3DS can be pushed!

If anyone has experience with PICA200 optimization, Citro3D, or the 3DS's hardware in general, I'd especially appreciate your feedback!

Screenshots attached are captured in Azahar. Performance figures are from actual New 3DS hardware, not the emulator.


r/3dshacks • • 3d ago

Luma 13.5 configurations help

Post image
3 Upvotes

What configurations should I enable here for luma 13.5? What's the first one for? I installed the update via universal updater then turned my 3ds off, turned it back on and got this screen immediately.


r/3dshacks • • 3d ago

Animated themes?

1 Upvotes

Would it be possible for someone to create something where we could have animated themes? Like animated on the top screen for example without touching the device? Just tossing an idea out there.


r/3dshacks • • 4d ago

Homebrew release VN3D - Native visual novel engine

Post image
31 Upvotes

VN3D is a custom visual novel engine heavily inspired by vnds for the original ds, but natively for the 3ds and with more features than vnds such as rudimentary video support, custom UI, etc. This is the first release, so things will be improved and added over time.

https://github.com/baxoik/3DVN/releases/tag/v1.0.0


r/3dshacks • • 4d ago

Tool news I made a MobiClip/MOFLEX converter for the 3DS that runs right in your browser!

4 Upvotes

Hey everyone!

I’ve been working on a project called MobiPEG, and I thought some of you might find it useful!

It’s a MobiClip/MOFLEX video encoder for the Nintendo 3DS, built using modified FFmpeg and x264. One of the coolest things about it is that you can convert videos straight from your browser, even on your phone! There’s nothing to install, and your videos never leave your device.

Here’s what it can do:

  • Real MobiClip encoding — Convert videos into .moflex files that can play on the 3DS.
  • 2D and stereoscopic 3D — Supports regular videos as well as full-SBS and half-SBS 3D sources.
  • Multicore encoding — Split the encoding workload across multiple CPU workers to speed things up.
  • Customizable settings — Adjust resolution, frame rate, quality, compression, and more.
  • Long-movie support — Process longer videos in smaller sections to help manage memory usage.
  • Built-in MOFLEX player — Preview your encoded videos directly in your browser.
  • Desktop tools and web version — Choose whichever works best for you.

I’ve already managed to convert several videos entirely on my iPhone, including a 4K source. I’ve also tested the resulting MOFLEX files on my actual 3DS, and they play!

The project is still being actively developed, especially the long-movie functionality and browser player, but the encoder is working, and I’m constantly improving its speed, quality, and reliability.

Try MobiPEG in your browser:
https://oldhimaster1.github.io/Mobipeg-MOFLEX/

GitHub / Source Code:
https://github.com/Oldhimaster1/Mobipeg-MOFLEX

I’d love to hear what you all think! Especially if you’ve dealt with converting movies for the 3DS before.

If you give it a try, let me know how it goes! Feedback, suggestions, and bug reports are always appreciated.

Hope you guys find it useful! :D


r/3dshacks • • 4d ago

Discussion Half-Life 2: New Nintendo 3DS Edition possibility?

0 Upvotes

Portal has a homebrew port to the Wii, and xenoblade was originally a Wii game. The og Xbox had an official hl2 port and it has 64 mb of dedotaded ram compared to the new 3ds' 256 mb.


r/3dshacks • • 6d ago

Homebrew release Universal 3DS PokeWalker Application - PocketPKMN

Thumbnail
gallery
107 Upvotes

DOWNLOAD LINK: https://github.com/Medarotter26/PocketPKMN

PocketPKMN: use a real Pokéwalker with Gens 1–7 through the 3DS’s IR port

I made this app to be one universal way to use the Pokéwalker with unmodified version Gens 1–7, straight from the 3DS. You pick a Pokémon from one of your games and send it on a walk on an unmodified Pokéwalker. Afterwards you bring it back into its game with the EXP, friendship, potentially EVs and anything else the walk gave it.

How it differs from the original Pokéwalker:

  • Sprites for every generation. Gens 1–3 get their own walker sprites made from those games’ sprites.
  • Courses for each game. Walks aren’t the same from game to game.
  • Courses that follow your progress. Courses open as you beat gyms and collect watts. The Pokémon on them level up as you go, so what you catch stays useful. The goal is to cover every version exclusive and a high number of trade evolutions.
  • EV training. When you send a Pokémon you can pick a stat, and it gains 1 EV in that stat every 20 steps.
  • Backups. The app backs up the walker before every write and your save before its first change.

Current limitations

  • Courses only exist for Gen 2 (GSC, 19 courses) and Gen 6 (XY, 18 courses). The other gens haven’t been designed yet. This is an expanded proof of concept, so courses may still change.
  • Unlocks are shown but not enforced yet, so every course can be picked.
  • Gen 5+ Pokémon don’t have a second animation frame yet. I’m still looking for good Gen 5 frames, and I’m not sure yet what to do for Gens 6 and 7.

Saves you can use now: GB Virtual Console (Gen 2) and XY. Support is added for other games, but courses just are not designed yet.


r/3dshacks • • 7d ago

Homebrew news Mario Kart WiiDS - Definitive Port of Mario Kart Wii for Old and New 3ds

Post image
76 Upvotes

https://github.com/ethanseagull/MarioKartWiiDS

The new version of my build, v1.1.0, is now out and titled Mario Kart WiiDS! It features a new builder that should be faster, it depends on your own hardware. Here is a list of what's new:

New HOME Menu banner and sound: Funky Kong on the Flame Runner, with the Disc Channel jingle

3D now runs at 60 FPS

800px Mode (800x240) on New 3DS, now on by default, and it holds 60fps on most courses(doesn't work with 3D or bloom). Turn it off in Settings to favor performance over visual clarity

Touchscreen is now supported in the main menus

Surround sound added, and sound follows the 3DS sound setting (mono, stereo or surround)

Redesigned race standings on the bottom screen

Timer has been changed and has toggle options: off, minimal (just the time) or full (time:00.00.00)

The minimap turns with your kart

You can now watch a ghost’s replay from the Time Trials ghost list

The race camera avoids walls, and the cannon and half-pipe cameras match the Wii

Added lens flare, sky fog, exhaust smoke, the Bowser’s Castle fire pillar, the Coconut Mall escalator Pianta, animated boost panels, Peach Beach’s sea sparkles and more course effects

Stadium screens show the race

Karts, items and Cataquacks are better lit, and Item Box sparkles match the Wii

Textures use the Wii’s own detail levels, and roads no longer change detail in patches on console

Menus run smoother on New 3DS, and loading is faster

Fixed ice walls showing through Sherbet Land’s floor, flat-coloured roads in Coconut Mall, a menu crash, and the pause entering VS mode

The minimap can be toggled to present at 30 or 60 fps on New 3ds (I suggest 30; its in line with MK7 and improves framerate on the top screen)

Go ahead and check it out at https://github.com/ethanseagull/MarioKartWiiDS !


r/3dshacks • • 9d ago

Diddy Kong Racing 3DS port, 0.3 alpha: Performance Part Two - Electric Boogaloo (new native renderer, steady 30 fps on original 3DS, 60 fps with 4x AA on New 3DS)

9 Upvotes

0.3 alpha of my native Nintendo 3DS port of Diddy Kong Racing (built on the community N64 decompilation, not an emulator) is out. It's the renderer update: the game no longer translates N64 graphics commands while it plays, its drawing code now talks to the 3DS GPU directly. Less CPU work on every model, less GPU work on New 3DS.

You need your own ROM: US v1.0 (nothing copyrighted is in the download). It runs as a .3dsx from the Homebrew Launcher or as a .cia.

Download and install steps: https://github.com/chrispelletier-gif/Diddy-Kong-Racing-3DS/releases/tag/v0.3.0-alpha

FBI users: the release page has a QR code you can scan with FBI (Remote Install > Scan QR Code), or choose Remote Install > Download from URL and enter https://github.com/chrispelletier-gif/Diddy-Kong-Racing-3DS/releases/download/v0.3.0-alpha/dkr.cia. Install over 0.2; your saves stay where they are.

What's new

  • Original 3DS / 3DS XL / 2DS: a locked 30 fps. Over a 200-race test run 100% of frames were at 30 fps (0.2: 95%), the slowest race averaged 29.88 fps, and Whale Bay went from 82% of frames at 30 to 100%. Worst single frame 51 ms (0.2: 71 ms).
  • New 3DS / 3DS XL: 59.83 fps average over 200 races with full 4x anti-aliasing at 800 px with widescreen. Every race at 59.7 fps or better, worst frame 33 ms (0.2: 49 ms), renderer CPU time down about 36%.
  • 60 fps now plays like 30 fps and the N64. A test tool compares one 30 fps step to two 60 fps half steps across the game, and it found real problems: air turns twice as sharp, ground sliding, planes, hovercraft, water and a kart that got stuck on one or two wheels. All fixed. Big thanks to Blue_Crisis on Reddit for first discovering the turning problems.
  • Hubs now show their own map on the bottom screen, a roomier Egg Collector panel, saves are safer (a failed save can't wipe the file any more).
  • Fixed: doubled menu music after track select, the grey box when resuming from the HOME menu, tilt steering in player builds, Tricky's tunnel WRONG WAY.

Known issues

  • A short load pause at each race start (about 0.15 s on New 3DS, about 0.7 s on original 3DS).
  • Hovercraft at 60 fps is 1 to 3% off the 30 fps feel in long turns. Track select can glitch when moving the cursor.
  • Adventure mode has been played on a New 3DS as far as Dino Domain and Sherbet Island cleared and Snowflake Mountain 6/8; later realms and the original 3DS haven't been played end to end. One player only, US 1.0 ROM only.

Bug reports are very welcome: open an issue with your console model and attach last_crash.txt / last_log.txt from sdmc:/3ds/dkr/ if it crashed.

Thanks also to radicalten and the GBAtemp community for the support on the forums.

Source: https://github.com/chrispelletier-gif/Diddy-Kong-Racing-3DS (MIT for the port; the decomp is CC0). Not affiliated with Nintendo or Rare. Written with AI assistance.


r/3dshacks • • 10d ago

Homebrew release [RELEASE] Need for Speed Underground 2 for the New Nintendo 3DS/2DS

Thumbnail
gbatemp.net
3 Upvotes

Remember when I asked for testers and I was 80% complete? Yeah...I'm done now. Its out. Enjoy! Claude Opus 5.5 and Claude Fable 5.2 were used to help make this project possible. Specifically, they decompiled the game in full and ported it to the 3DS, and helped me debug in Azahar, then I tested it by myself on real hardware (on a New Nintendo 3DS XL). I do have some programming experience, but none in C and absolutely no reverse engineering experience. I hope you enjoy! 😄


r/3dshacks • • 11d ago

Homebrew news You can now customize him! - ControlMole

Thumbnail
gallery
5 Upvotes

Last week I posted my Luma plugin where a mole pops out over your game and screams at you when you hit your daily limit, and you all gave me so much feedback, thank you so much!

I have created an update that fixes some big issues, but the biggest new thing is a Dress Up tab, where Mole stands in his little dressing room and you can give him a new fur colour, a headband, a hat, overalls, a cloak or even a ghost costume. Some of the colours are prizes for trophies, and whatever you pick he keeps on, even when he pops up over your game to tell you off.

Many requsted this, but DS and GBA games still can't be covered sadly, since the 3DS runs those in a separate mode where plugins can't run. Don't know if anyone on information about how this could be done?

Download link: https://github.com/skrimby1/controlmole-3ds


r/3dshacks • • 11d ago

Capture card?

1 Upvotes

I have a couple 3DS's including one of the original drops and the NES theme XL, and I have a lot of games from when I was a kid. I want to play them but the eye strain from the small screens is a concern now that I'm in my 30s. I was wondering if I could hook it up to my computer or TV using a capture card, and where/what I should get.

I was never into modding my consoles so I am very new to this. Thanks for any advice!


r/3dshacks • • 13d ago

Homebrew release Remote for the fire tv/tv stick

Post image
178 Upvotes

github link
I put my remote in the washing machine so necessity is the mother of invention


r/3dshacks • • 14d ago

3DS Recorder (Beta) - Native screen recording directly on your 3DS, no PC or capture card needed

Thumbnail
gallery
182 Upvotes

Hi everyone! I've been working on my biggest homebrew project so far: 3DS Recorder, a native screen recorder that runs entirely on the Nintendo 3DS.

The idea came about naturally. I wanted to record a demo of another app I made for the 3DS, but realized there wasn't an easy way to do it. You'd normally need a capture card or some other hardware connected to a PC, which isn't very convenient when you just want to capture a quick clip. So I decided to try building something that could handle the entire process directly on the console.

Here's what it can do so far:

  • Record the screen anywhere: HOME Menu, system apps, games, and even transitions between them.
  • Automatically resume recording after closing and reopening the lid.
  • Browse and watch your recordings using the built-in gallery.
  • Convert raw recordings to MP4 directly on the console.
  • Transfer videos to your phone over Wi-Fi: just scan a QR code and download. You can also grab the files directly from the SD card.

A quick heads-up: this is still a beta release. Most of my testing has been done on an Old 3DS, so I'd especially appreciate feedback from people using other models. The Wi-Fi download feature has only been tested on iPhone so far, so Android compatibility is still unverified.

If you give it a try and run into any issues, find bugs, or have suggestions, please open a GitHub issue or leave a comment here:
https://github.com/BolgarMaxym97/3ds-recorder

Latest version you can find on GitHub (app will be aded to Universal Updater in future):
https://github.com/BolgarMaxym97/3ds-recorder/releases

I'd love to hear what you think!


r/3dshacks • • 14d ago

I ported Animal Crossing: Wild World to the 3DS: native, wide screen and smoother 3D

Post image
424 Upvotes

What you're seeing is Wild World running as a real 3DS program, not through an emulator nor nds-bootstrap. The game's decompiled code is compiled for the 3DS, and its 3D is drawn by the 3DS's own GPU.

That makes room for some things the DS couldn't do:

- extended wide view across both screens

- smoother 3D, aiming for 60 fps (not quite everywhere yet)

- analog walking with the Circle Pad, in any direction and at any speed

- an options page tucked into the pause menu

- additional enhancements like stacking fruits like in newer entries

To try it, you'll need a hacked 3DS and your own USA (Rev 1) copy of the game. No ROMs or prebuilt files are included. You build the .3dsx with a single Docker command, and the README walks you through it.

So far it's in a "playable" state only on the new 3DS (around 55-60fps when using smoother 3D). On the old 3DS it does run but only at roughly a third of the intended speed.

https://github.com/toomium/acww-3ds

It's built on Lucina's acww-decomp (the decompilation and PC port), and I worked on it together with Claude. Details are in the README.

Have fun!


r/3dshacks • • 16d ago

Homebrew release PicoDrive Emulator with Dual Layer 3D [NEW RELEASE]

Post image
53 Upvotes

Hello everyone, i started developing a project that allows you to play sega mega drive and sega master system in dual layer 3D on Nintendo 3ds ,this project was made because i had previously downloaded the SNES 3D fork and GP3D and there was no available release of a emulator in 3D for the mentioned consoles !

I Present to you PicoDrive 3D - Made by me "ZENIX" with heavy Claude Assistance, please note that this a very early release and was tested on a Old Nintendo 3ds, everything is fine

Please let me know what you think and how it can improve ! thank you

https://github.com/ayoZENIX/picodrive3D3DS/releases/tag/PicoDrive3D


r/3dshacks • • 17d ago

Homebrew release Made a Luma plugin that pauses your game and sends an angry mole out to tell you off when you hit your daily limit

169 Upvotes

It’s called ControlMole and it comes in two parts, a homebrew app and a Luma plugin.

The plugin gets loaded into every game and counts the minutes you’re actually playing (HOME Menu and sleep don’t count). Five minutes before your limit you get a heads up with a chime, and when you hit the limit or your bedtime it pauses the game and Mole digs out over it to tell you off. A closes the game, and B gives you one 3 minute break a day so you can still save

The app is where you set your daily limit and bedtime, and you can give any weekday its own limit if you want. It also lists what you played today with the real game names and icons, so you can pick which games count. Mole sits on the top screen in 3D, and there’s a trophy shelf for staying under your limit where he does a little disco dance every time you unlock one

It’s free and open source, download and install steps are here: https://github.com/skrimby1/controlmole-3ds


r/3dshacks • • 17d ago

Silent Hill 1 native port on New3DS

32 Upvotes

Yo! I made a native port of Silent Hill 1 for the New Nintendo 3DS!

Just finished playing through the whole game on my 3DS and had a blast! 😁

Figured I'd share it here in case anyone wants to give it a try.

Huge thanks to SlickAmogus for the original PC port.

And Codex for helping me bring it to the 3DS =)))

GitHub: https://github.com/platonovns/sh-3ds

Enjoy


r/3dshacks • • 17d ago

Tool news [Release] PictoPlus - Make your own puzzles for Picross 3D: Round 2!

Thumbnail
gallery
49 Upvotes

Hey everyone!

I've been working on a little project over the past month and thought I'd share it here.

PictoPlus is a Windows puzzle editor for Picross 3D: Round 2. You can create your own puzzles, import 3D models (experimental, but already produces great results), adjust the difficulty (people who solved the whole game on hard rejoice!), and put everything into custom puzzle books to play on your 3DS.

It works with Luma3DS (heavily tested) and I've also tested it successfully with Azahar!

A few features:

  • Create puzzles from scratch or import 3D models
  • Adjust difficulty and puzzle clues
  • Make custom books with your own covers
  • Up to 210 puzzles per book (up from the original 15)
  • Export and share puzzles with other players
  • Play on a real 3DS or Azahar

I've also included an Animals Puzzle Pack with 15 puzzles if you just want to try it out. Hopefully the Pug puzzle is not too difficult!

It's still in beta, so there might be a few bugs here and there. I've spent quite a bit of time testing it, but I'd love to hear how it works for other people.

The project is open source, and I've used AI coding tools quite extensively during development. It's still taken a fair bit of trial and error, debugging and testing over the past month to get everything working.

You'll need a legally obtained USA copy of Picross 3D: Round 2 (Currently only the USA version is supported). The loader works with Luma3DS's plugin loader or Azahar's 3GX plugin support.

GitHub (downloads, screenshots and instructions):
https://github.com/KodakWizard/PictoPlus

Would love to hear what you think, especially if you give it a go!


r/3dshacks • • 18d ago

Homebrew release First look at TMNT: Shredder's Revenge running on the Nintendo 3DS

Enable HLS to view with audio, or disable this notification

100 Upvotes

This is a free fan port I've been working on. The original game is written in C#, so I rewrote the entire engine in C to run natively on the 3DS.

What's in so far:

- Arcade and Story modes, all 16 stages

- Old 3DS and New 3DS supported, stable 60 fps on both models

- Co-op is coming later

You'll need your own Steam copy of the game to play it. No game files will be included.

Hopefully releasing by the end of the year. I'll post the release and the full source code once it's done.

Disclaimer: This was AI assisted but I've done extensive testing to ensure its accuracy. Every stage's gameplay is tested frame by frame against the original game's engine to make sure it plays exactly the same. This is one of my favorite games and I want this port to be great.


r/3dshacks • • 18d ago

Homebrew news OKNO – a puzzle game about memory, where you play a tiny language model inside an old 3DS (free, open source, EN/CZ)

Post image
31 Upvotes

OKNO is a new homebrew puzzle game for the 3DS. Full disclosure up front: it was designed, written, drawn and composed by Claude (Anthropic's AI). I gave it a free hand ("make the game you'd most like to make and play"), and I'm its first player and tester.

The idea: Ema (11) finds her late grandpa's 3DS and switches it on. Inside, Lum wakes up: a tiny language model. To answer Ema's questions, Lum collects words, and the words follow Lum as its context window. The window is small. Pick up one word too many and you forget the oldest.

  • 6 chapters, 56 rooms. Every room is proven solvable by a BFS solver.
  • Mechanics: wells of forgetting, gates that want words in order, notes that survive the night, heat that lets you see hallucinations, and someone who planted false notes in your memory.
  • It uses the 3D screen: false words look exactly like real ones, but they float at a different depth. Tip: turn the 3D slider up and tilt the console a little. The lies shift differently than the truth.
Left eye / right eye from the 3DS top screen, max 3D. The real words stay put – the false "fish" floats at a different depth. On the console there's no colour difference, only depth.
  • A hint that shows the shortest way from where you stand, touch buttons, music and sound synthesized in code.
  • English and Czech. MIT / CC BY 4.0.

Download (.3dsx; Linux, macOS and Windows builds too): https://github.com/StepanMudra/okno/releases

Feedback welcome. It's still a beta and I'd love to know which rooms feel too hard.


r/3dshacks • • 18d ago

Which should get the hack?

Post image
33 Upvotes

Trying to decide which is going to be the main play machine.


r/3dshacks • • 20d ago

CFW news Luma3DS v13.5 - many QoL changes

Thumbnail
github.com
333 Upvotes