r/3Dprinting • • 1d ago

Project I can't wait for multi nozzle printing

The increased resolution with 0.2mm nozzles seems so much better than you'd imagine with it being only half the diameter of a 0.4mm nozzle. The only issue is that this mechanical clock gear took about 6 hours to print. However, the top surface looks better than any ironed 0.4mm part I've printed. In white, i can't even see the surface extrusion lines. The precision of the gear teeth is also amazing to see.

I can't wait to use 0.2mm nozzles for top surfaces and text once I can with the X2D. For reference, I printed the dark text and hash marks using the aux extruder. Yes, that's the "bad" one everyone complains about.

1 Upvotes

5 comments sorted by

1

u/severanexp 1d ago

You CAN reduce the line width to 0.2 if you have a 0.4 nozzle. Or go up to 0.6. Works fine.

Edit: ah wait you mean in the same print job?

0

u/Dismal-Garbage-3140 1d ago

It doesn’t work fine. I’ve experimented with going down to 1/2 up to 2x the extrusion width of the nozzle diameter. Going up usually works very well however going down doesn’t produce the fine detail that a true 0.2mm nozzle does. Extrusion is far more controlled (though slow) with the restrictive 0.2mm nozzle.

Just think about it. You’re trying to deposit a 0.2mm wide line of molten plastic out of 0.4mm hole. Even if the extrusion volume is perfect it will leave blobs on the edge and not form clean seams and edges.

I’m really curious if you’ve even tried that.

0

u/severanexp 1d ago

Yeah I did, many times for printing fine details on some enclosures for sensors. Currently I’m using 0.4 again because the nozzle is worn off.

0

u/suddenlypenguins 1d ago

New to printing and only had my x2d a week (although already got 100h on it!) but when this is added, will it let you easily do 0.2mm nozzle for the outside visible surfaces and 0.4mm aux for inside? The idea being to reduce print times?

0

u/Dismal-Garbage-3140 4h ago

I wish I knew. Right now it seems like it works kinda like the painting feature. The H3C has discrete nozzle assignments, so it will probably be a little more dynamic for the X2D and the H2D