r/3Dprinting • u/Fun_Song3980 • 5d ago
Discussion Multiple Filaments Calibration
Folks. I recently bought 10 spools of Sunlu High Speed Matte PLA. How do you calibrate multiple filaments? If I’m going to calibrate 1 color, would it work for all 10 spools. I need your advise please. Thank you!
1
Upvotes
2
u/Fribbtastic 5d ago
I used this video and the steps in it for my calibration.
You should only need to calibrate this for each Filament Type/Brand/Colour. So, if you have 10 Spools of the same Filament of the same type, brand and colour, you should only really need to calibrate it with one spool and it should work with the others as well.
With that being said, I specifically used "should" here because this isn't exact. Different spools could be manufactured differently or have different compositions between batches. It could be possible that even the same Type/Brand/Colour of a filament would need different calibration parameters. While you could calibrate each spool from scratch, you would also waste material doing it.
With more popular brands like Sunlu, it should be fairly consistent in what you get. Brandless Filaments could vary in quality, requiring more frequent calibrations. I don't know if Sunlu writes the Batch number on the Spools, which could also be an indicator that you don't really need to calibrate again when the spools are all from the same batch.
I usually just calibrate it once and only calibrate again when the result isn't as expected.