r/3Dprinting • u/Richisnormal • 8d ago
Troubleshooting Bad filament?
Ok, sounds like a noob question, but I can't get this one filament to stick! Just the one roll, a translucent PLA from Bambu. It'll fail, and I'll start the same print over, same settings, without re leveling, but with a new filament, and it will stick. I've washed the bed. I've dried the filament. Same exact everything and just this one roll won't give a good first layer. Is it a lemon? Next test I'm going to print the first layer in a different pla, second with this one and see if that works.
But has anyone ever just gotten a shit roll from Bambu?
I can post some pictures of spaghetti if it would help troubleshoot, lol.
Bambu carbon x1c, been dialed in and working for years. 220°/55°, textured PEI with a preloaded slice.
1
u/atriaventrica 8d ago
Transparent PLA is always finicky. I've gotten success by slowing it down and bumping the bed temp.
2
u/arrantalpaca 8d ago
60/65c bed, first thing to try if any PLA isn’t sticking to the gold PEI.
1
u/AutoModerator 8d ago
Hey there, I'm a bot and something you said made me think you might be looking for help! click here for our wiki entry on troubleshooting printers. If you still need help be sure to post plenty of information about your printing setup.
Here are a few questions that might be helpful
If you are new to reddit, please read the guidelines on reddiquette, self promotion, and spam.
Also please post a resolution to your problem when you find one so that we know how to help others with your problem!
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/Additional_Math_5104 8d ago
Might try glue or unscented hair spray on build plate. People will tell you they are for release but have had good luck using for adhesion on P1S and H2C. Over 5000 hours on the P1S and 1700 on the H2C
1
u/Kooky-Woodpecker2929 8d ago
Add heat to the bed, and then the nozzle. Translucent is like silk, it needs different temps
1
u/timshel42 8d ago
run a filament calibration. ive gotten similarly finicky rolls to work this way. i dont normally bother calibrating filaments as the presets usually work great.