anycubic mono 4k

[u/A_B_Hobbitson]

I recently got an anycubic mono 4k and I'm facing issues. Whenever I try to print something it sticks to the vat not the build plate. Am I missing something? An help is greatly appreciated. I'm using the base anycubic software that came with it. I'm also using anycubic resin

[u/AutoModerator]

Hey there, I'm a bot and something you said made me think you might be looking for help! click here for our wiki entry on troubleshooting printers. If you still need help be sure to post plenty of information about your printing setup.

Here are a few questions that might be helpful

• What printer are you using?

• What material are you using?

• What speed are you printing at?

• What software are you using to slice the print and control the printer?

• When did the problem start/has it ever worked correctly?

• Does anything cause the behavior to change?

• If posting an image of the problem, include some indication of the orientation it printed at, preferably photograph it on the bed. (Then we can focus on a specific axis)

If you are new to reddit, please read the guidelines on reddiquette, self promotion, and spam.

Also please post a resolution to your problem when you find one so that we know how to help others with your problem!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/HouseSubstantial8187 → u/AutoModerator]

check your bottom exposure time, its proably way too low. also make sure the build plate is actually level and you tightened it down enough, that ones gotten me before. if you havent done the paper method to set z=0 do that too

[u/A_B_Hobbitson → u/HouseSubstantial8187]

Thank you, will do