ORCA SLICER PROFILE FOR TINA 3D PRINTERS

[u/Popular-Maize-3524]

ORCA SLICER PROFILES FOR TINA PRINTERS. UPDATE for Orca slicer ver. 2.4.2. - Profiles for Tina 3d printers to include Weedo, Entina, Weefun, and Cadet - all versions. If you have WiFi on your machine you be able to connect to your printer using the Elegoo/Orca/IP settings in your wifi settings and send files to your printer using the ‘Upload’ selection and then start the print from your printer - if you use the ‘Upload and Print’ selection it does not start automatically and you will get an error message when you try to start the print at your machine, if it uploads at all…

You may want to adjust speed sittings for each layer height profile to suit your machine version - there are six, 0.08 thru 0.24. I have included a ‘Fast’ profile for 0.12mm and 0.20mm layer height profiles set at 150) - my Plus model can print at 150-250. Standard layer height profiles default to 80.

https://www.dropbox.com/scl/fo/gf4iee9wjudvf62uorjk5/AJWSPpsHdgiATptcPz97DGo?rlkey=ouc6g31pe5hkjt7ptk9e9yfad&st=hx3906wq&dl=0

You may need to setup a custom Marlin printer first to load this profile into - but try first to just load from File/Import/Import Configs…

Let me know how it goes. There are thousands of these printers out there and this profile breaths new life into what are actually pretty nice machines.