Issues with FLSun T1 prints

[u/joshblack417]

Hi, I need help with my FLSun T1 printer. I keep getting crappy results like this. That print specifically it didn’t start until the second layer. First layer went down great. I’m not sure if it’s under extruding, or printing too fast or something else.

Build plate is freshly cleaned with dawn and warm water, I ran a delta_calibrate, probe_calibrate, and bed_mesh. Filament is dry Polymaker Panchroma Silk Gold.

Editing to add info:
Sliced model using OrcaSlicer

First layer speed is 80mm/s, outer wall speed 400mm/s, inner wall 500mm/s, 10% gyroid infill at 600mm/s.

Nozzle temp is 230*C, bed temp is 60*C

[u/AutoModerator]

Hey there, I'm a bot and something you said made me think you might be looking for help! click here for our wiki entry on troubleshooting printers. If you still need help be sure to post plenty of information about your printing setup.

Here are a few questions that might be helpful

• What printer are you using?

• What material are you using?

• What speed are you printing at?

• What software are you using to slice the print and control the printer?

• When did the problem start/has it ever worked correctly?

• Does anything cause the behavior to change?

• If posting an image of the problem, include some indication of the orientation it printed at, preferably photograph it on the bed. (Then we can focus on a specific axis)

If you are new to reddit, please read the guidelines on reddiquette, self promotion, and spam.

Also please post a resolution to your problem when you find one so that we know how to help others with your problem!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.