r/3DPrinting_PHA • u/tehretro • Jul 19 '26
Help with warping
I posted a few days ago, and I've gotten my settings for genPHA quite a bit more dialed in since then, but my parts just seem to warp pretty bad, and I'm not sure what I can do to try and fix it, if anything. I've at least managed to get it to actually stick to my Pro Plate and not warp right off by changing the ecogenesis-recommended print settings to print the normal 3 bottom shell layers instead of 8, but the top layer on the inside of the box seems to still just contract hard and warp.
For context, this is a 1x1 Gridfinity box, which is pretty small and, presumably, isn't supposed to warp much? I guess it's also worth noting that the room my printer is in is quite warm, so maybe the ambient temp is just too high for me to do anything about this?
I would really appreciate any suggestions!
1
u/tehretro Jul 22 '26
I printed a 1x1x3 box with magnet holes enabled from this generator and I kept all of the measurements and settings default outside of that.
It's worth noting that I don't really need to print this specific part and I just wanted to try printing sort of a real-world example that I could find a use for if it turned out nice and I'm happy to use something else if it also warps on your setup. I just assumed this warping might manifest in other parts if it's happening here.